Materials engineering topic list of research papers
-
Using Multi-objective Optimization to Identify Dynamical Network Biomarkers as Early-warning Signals of Complex Diseases2016 / Fatemeh Vafaee
-
Advance on Al2O3Particulates Reinforced Aluminum Metal Matrix Composites (Al-MMCs) Manufactured by the Power Metallurgy(PM) Methods- Improved PM Techniques2016 / Lina Xu, Fengqing Zhang, Xuetao Yue, Qingbo Tian
-
Manganese mono-boride, an inexpensive room temperature ferromagnetic hard material2017 / Shuailing Ma, Kuo Bao, Qiang Tao, Pinwen Zhu, Teng Ma, et al.
-
Melt infiltrated tungsten–copper composites as advanced heat sink materials for plasma facing components of future nuclear fusion devices
Abstract The exhaust of power and particles is regarded as a major challenge in view of the design of a magnetic confinement nuclear fusion demonstration power plant (DEMO). In such a reactor, highly loaded plasma facing components (PFCs), like the...
2017 / A.v. Müller, D. Ewert, A. Galatanu, M. Milwich, R. Neu, et al. -
Unraveling irradiation induced grain growth with in situ transmission electron microscopy and coordinated modeling2015 / D. C. Bufford, F. F. Abdeljawad, S. M. Foiles, K. Hattar
-
Mechanical Behaviour and Surface Profile Analysis of Al6061 alloy Processed by Equal Channel Angular Extrusion
Abstract A coarse grained microstructure of Al6061 alloy was processed by Equal Channel Angular Pressing (ECAP) via route C (rotating the sample to 1800 between each pass) at room temperature. The samples were processed up to four passes through a...
2017 / Ankit Sahai, K. Hans Raj, N.K. Gupta -
Application of Abaqus Software for the Modeling of Surface Progressive Hardening
Abstract The article concerns numerical modelling of phase transformations in solid state during hardening of steel. Abaqus FEA software is used for numerical analysis of temperature field and phase transformations in analyzed process. Additional...
2017 / Tomasz Domański, Alžbeta Sapietová, Milan Sága -
Taking Electrons out of Bioelectronics: From Bioprotonic Transistors to Ion Channels2017 / Xenofon Strakosas, John Selberg, Zahra Hemmatian, Marco Rolandi
-
Thermal-electronic Integrated Circuits Using Thermally Sensitive VO2 MIT Material
Abstract Traditional integrated electronics is based only on electric signal processing, thermal phenomena are considered as a parasitic (side) effect. However, the thermal state of a device may represent information too. Thermal-electronic devices...
2017 / János Mizsei, J. Lappalainen -
Comparison of Effect of Metakaolin and silica Fume on Fly Ash Concrete Performance2016 / Yunfen Hou, WuBao Si, XiaoDong Peng, Nan Xing
-
Electrochemical corrosion behaviors of the X90 linepipe steel in NS4 solution
Abstract Oil and gas line pipes are laid underground and run through different areas in the laying process, so they will be subjected to different degrees of corrosion and even crack, leading to enormous casualties and economic losses. In order to...
2017 / Jinheng Luo, Liang Zhang, Lifeng Li, Fengping Yang, Weifeng Ma, et al. -
Improved Sound Absorption Performance of Nonwoven Fabric using Fabric Facing and Air Back Cavity2017 / Ahmad Yusuf Ismail, Muhamad Rafi Omar, Muhamad Arif Anuar Hashim, Muhamad Ridzuan Md Radzi
-
Exploration of nonlinearly shunted piezoelectrics as vibration absorbers2016 / B Zhou, C Zang, X Wang
-
The effect of fibre layering pattern in resisting bending loads of natural fibre-based hybrid composite materials2016 / Muhamad Shahirul Mat Jusoh, Mohd Yazid Yahya, Nur Izan Syahriah Hussein
-
Development of a Low Cost MQL Setup for Turning Operations2017 / Sumaiya Islam, Noman Khandoker, Mohamad Izham, Tengku Azizi, Sujan Debnath
-
The Use of Genetic Algorithm for Construction Objects with Necessary Average Values Scattering Characteristics
Abstract In the paper we consider the possibility of constructing models of objects that have the maximum average values of the characteristics of scattering at a certain sector of angles. For optimization of these characteristics we use genetic...
2017 / I.Ya. Lvovich, Ya.E. Lvovich, A.P. Preobrazhenskiy, O.N. Choporov, Yu.S. Sakharov -
Synthesis and Characterization of the PVDF-BTO Nanocomposites with the Employment of RGO Sheets for Flexible Energy harvesters
Abstract The effect of reduced graphene oxide (RGO) on the dielectric and ferroelectric properties of poly(vinylidene fluoride)-barium titanate (PVDF-BTO) nanocomposites have been investigated. To obtain the insulator-conductor insulator structure,...
2017 / Usman Yaqoob, Gwiy-Sang Chung -
Optimizing and Controlling the Productivity of a Flat Plate Collector by Using an Electronic System
Abstract The Flat Plate Collector (FPC) is a thermal solar collector used in housing or residential applications that allows the conversion of solar radiation to thermal energy (e.g. hot water). In this paper we propose a new approach that improves...
2017 / Kamal Anoune, Mohsine Bouya, Abdellatif Ben Abdellah, Abdelali Astito -
Preliminary Results of Ecotoxicological Assessment of an Acid Mine Drainage (AMD) Passive Treatment System Testing Water Quality of Depurated Lixiviates
Abstract The current work reports on the preliminary results of a toxicity test using screening experiments to check the efficiency of an innovative passive treatment plant designed for acid mine drainage purification. Bioassays took place with...
2017 / Aguasanta M. Sarmiento, Estefanía Bonnail, José Miguel Nieto, Ángel DelValls -
Effect of boundary conditions on the evolution of lattice strains in a polycrystalline austenitic stainless steel2017 / Y. Q. Wang, S. Hossain, S. Kabra, S. Y. Zhang, D. J. Smith, et al.