Materials engineering topic list of research papers
-
Design and development of novel MRI compatible zirconium- ruthenium alloys with ultralow magnetic susceptibility2016 / H.F. Li, F.Y. Zhou, L. Li, Y.F. Zheng
-
MPM with Frictional Contact for Application to Soft Particulate Materials
Abstract Soft particle materials are composed of discrete particles that can undergo large deformations without rupture. Most food products, many powders, colloidal pastes, vesicles and biological cells are soft particle systems. In order to model...
2017 / Saeid Nezamabadi, Thanh H. Nguyen, Jean-Yves Delenne, Julien Averseng, Xavier Frank, et al. -
Cymatics for the cloaking of flexural vibrations in a structured plate2016 / D. Misseroni, D. J. Colquitt, A. B. Movchan, N. V. Movchan, I. S. Jones
-
Selecting and Optimizing a Heat Exchanger for Automotive Vehicle Rankine Cycle Waste Heat Recovery Systems
Abstract This paper contributes for the selection and optimization of an adequate compact heat exchanger (HEX) for an automotive vehicle Rankine cycle Waste Heat Recovery Systems (RC-WHRS). Both tube type and plate type HEX were considered. Among...
2017 / Helder Santos, Joel Morgado, Nuno Martinho, João Pereira, Ana Moita -
Ballistic Performance of Unidirectional Glass Fiber Laminated Composite Plate under Normal and Oblique Impact
Abstract In this paper, experimental and numerical analysis of perforation behaviour of laminated composite reinforced with unidirectional glass fiber have been presented due to impact by 52 g blunt projectile. The influence of oblique impact on the ...
2017 / Md. Muslim Ansari, Anupam Chakrabarti -
Microalgal hydrogen production: prospects of an essential technology for a clean and sustainable energy economy2017 / Vinzenz Bayro-Kaiser, Nathan Nelson
-
Studies of dust from JET with the ITER-Like Wall: Composition and internal structure
Abstract Results are presented for the dust survey performed at JET after the second experimental campaign with the ITER-Like Wall: 2013–2014. Samples were collected on adhesive stickers from several different positions in the divertor both on the...
2017 / E. Fortuna-Zaleśna, J. Grzonka, M. Rubel, A. Garcia-Carrasco, A. Widdowson, et al. -
Modelling of Heat Affected Zone in Submerged arc Welding Butt Joint with Thorough Penetration
Abstract Three-dimensional temporary field for butt welding with thorough penetration was described on the basis of analytical methods of an integral transformation and Green's function. Computations of temporary temperature field have been...
2017 / Jerzy Winczek, Ryszard Parkitny -
Anisotropic layered Bi2Te3-In2Te3 composites: control of interface density for tuning of thermoelectric properties2017 / Dongmei Liu, Xinzhong Li, Pedro Miguel de Castro Borlido, Silvana Botti, Roland Schmechel, et al.
-
Entropy and transport properties of liquid metals along the melting curve2017 / Qi-Long Cao, Pan-Pan Wang, Ju-Xiang Shao, Fan-Hou Wang
-
Investigations on Physical-mechanical Properties of Effective Thermal Insulation Materials from Fibrous Hemp
Abstract Depletion of fossil fuels resources and large amounts of pollutants emitted to the atmosphere enforce searching for alternative renewable resources. One of these resources is fibred hemps. The main components obtainable during the...
2017 / Arūnas Kremensas, Rūta Stapulionienė, Saulius Vaitkus, Agnė Kairytė -
Performance Evaluation of Electrode Materials in Electric Discharge Deep Hole Drilling of Inconel 718 Superalloy
Abstract In the present study, electric discharge deep hole drilling of Inconel 718 was experimented with three different commercial tube electrodes viz., copper, copper-tungsten and graphite. The pertinent process parameters selected for the study...
2017 / P. Kuppan, S. Narayanan, R. Oyyaravelu, A.S.S. Balan -
Effect of pressure on the structural properties of Li[Li0.1Ni0.35Mn0.55]O22015 / Yufeng Zhang, Li Wang, Juping Yang, Xiangming He, Jixian Wang, et al.
-
Mechanism of the performance improvement of TiO2-x-based field-effect transistor using SiO2 as gate insulator2011 / Ni Zhong, Hisashi Shima, Hiro Akinaga
-
Fluid Genetic Algorithm (FGA)
Abstract Genetic Algorithm (GA) has been one of the most popular methods for many challenging optimization problems when exact approaches are too computationally expensive. A review of the literature shows extensive research attempting to adapt and...
2017 / Ruholla Jafari-Marandi, Brian K. Smith -
Non-linear Vibration Protection Systems Phase-frequency Characteristics Measurement Method and its Research for Polyharmonic Model of Vibration Signal
Abstract Results of testing of algorithm for estimation of phase-frequency characteristics of vibration protection systems for existence of significant non-linear distortions are presented. Estimations of maximal error are obtained for phase shift...
2017 / L.А. Varzhitckii, G.V. Lazutkin, D.P. Davydov, О.S. Surkov, К.V. Boyarov -
The roles of Eu during the growth of eutectic Si in Al-Si alloys2015 / Jiehua Li, Fredrik Hage, Manfred Wiessner, Lorenz Romaner, Daniel Scheiber, et al.
-
Process Validation and Revalidation in Medical Device Production
Abstract In this paper, the author according to ISO13485:2003, YY / T 0287-2003 quality management system for medical device regulatory requirements, and process validation guidance document GHTF-SG3-N99-10-2004, combined with the actual...
2017 / Yincheng Zhao, Kuangjie Sheng, Zheng Wang, Xilin Zhang, Hengyiyang, et al. -
Improvement of Mode I Interlaminar Fracture Toughness of Stitched Glass/Epoxy Composites2016 / D. Göktaş, W. R. Kennon, P. Potluri
-
Planning, Operation, and Protection of Microgrids: An Overview
Abstract The significance of microgrids is growing rapidly. Microgrids have a huge potential in boosting the sustainable growth. A microgrid can operate in grid-connected or islanded mode. In islanded mode, microgrids can provide electricity to the...
2017 / Faisal Mumtaz, Islam Safak Bayram