Materials engineering topic list of research papers
-
MHD flow and heat transfer in model geometries for WCLL blankets
Abstract In the water cooled lead lithium (WCLL) blanket liquid lead lithium PbLi is used as breeder, neutron multiplier, and as heat transfer medium. The released heat is removed by water that flows at a pressure of 155bar through cooling pipes...
2017 / L. Bühler, C. Mistrangelo -
Mechanical Properties of Concrete with Enterococcus Faecalis and Calcium Lactate
Abstract Concrete is an important material used globally, diverse as it can be applied in all construction type or modify to be apply in specialize construction fields. Adding bacteria in concrete can improve the concrete properties and increase...
2017 / J.M. Irwan, L.H. Anneza, N. Othman, A. Faisal Alshalif, M.M. Zamer, et al. -
Surface stress on the effective Young’s modulus and Poisson’s ratio of isotropic nanowires under tensile load2015 / Jin He
-
Effect of PCM in Improving the Thermal Comfort in Buildings
Abstract A thermal dynamic simulation was realized with the TRNSYS 17 software, using type 204, to compare the thermal behaviour of an office having conventional walls with another office having walls incorporating phase change materials (PCMs). The ...
2017 / Lotfi Derradji, Farid Boudali Errebai, Mohamed Amara -
Dendritic Structure Analysis of CMSX-4 Cored Turbine Blades Roots2016 / J. Krawczyk
-
Dynamic characteristics of two-state lasing quantum dot lasers under large signal modulation2015 / Zun-Ren Lv, Hai-Ming Ji, Shuai Luo, Feng Gao, Feng Xu, et al.
-
Thermodynamic Properties of Aqueous Arsenic Species and Scorodite Solubility
Abstract An internally consistent thermodynamic network for arsenic minerals and aqueous species is being developed based on a high quality starting point: arsenolite and arsenolite solubility. Current research is refining the properties of...
2017 / D.K. Nordstrom, X. Zhu, R.B. McCleskey, L.C. Königsberger, E. Königsberger -
Centrifugal Castings Locally Reinforced with Porous AL2O3 Preform2014 / A.J. Dolata
-
Numerical Analysis of the Structure Girder for Vehicle Axle Scale Calibration
Abstract This paper deals with strength analysis of a part of a welded steel structure that will be used to calibrate vehicle axle scales with a loading capacity up to ten tons. The structure strength analysis is carried out in ADINA software, and...
2017 / Miroslav Blatnický, Mária Štauderová, Ján Dižo -
Heating & current drive efficiencies, TBR and RAMI considerations for DEMO
Abstract The heating & current drive (H&CD) systems in a DEMOnstration fusion power plant are one of the major energy consumers. Due to its high demand in electrical energy the H&CD efficiency optimization is an important goal in the...
2017 / T. Franke, P. Agostinetti, K. Avramidis, A. Bader, Ch. Bachmann, et al. -
Modeling of Fibre-reinforced Magneto-thermoelastic Plate With Heat Sources
Abstract In the present study, a novel mathematical model of magneto–thermoelasticity has been formulated to investigate the transient phenomena for a fibre–reinforced anisotropic thick plate having a heat source in the context of Green–Naghdi...
2017 / Abhik Sur, M. Kanoria -
Correlation between the microstructures and the deformation mechanisms of CuZr-based bulk metallic glass composites2013 / K. K. Song, S. Pauly, B. A. Sun, J. Tan, M. Stoica, et al.
-
Deuterium retention and blistering in tungsten foils
Abstract To investigate deuterium retention and the onset of blistering, deuterium was implanted in cold rolled tungsten foils at fluences ranging from 3 ×1020 to 3 ×1022 D/m2. Ion energies were 300eV and 2000eV in order to be...
2017 / C.N. Taylor, M. Shimada, B.J. Merrill -
A first principles study of iron doping in Ni2CoGa magnetic shape memory alloy2015 / A. Tavana, L. Mikaeilzadeh
-
Assessment of Mechanical and Tribological Properties of Al 2024- SiC - Graphene Hybrid Composites
Abstract In the recent years, enormous research has been carried out and reported on ceramic and carbon based reinforcement. Graphene, no wonder has attracted significant research interest due to its extensive physical properties at its single...
2017 / H.G. Prashantha Kumar, M. Anthony Xavior -
Modeling of a Sintering Process at Various Scales
Abstract This paper presents modeling of a sintering process at various scales. Sintering is a powder metallurgy process consisting in consolidation of powder materials at elevated temperature but below the melting point. Sintering models at the...
2017 / Jerzy Rojek, Szymon Nosewicz, Marcin Maździarz, Piotr Kowalczyk, Krzysztof Wawrzyk, et al. -
Application of Geogrid Reinforced Constructions: History, Recent and Future Developments
Abstract Geosynthetics are widely used for separation, protection, drainage, filtration and sealing. In addition, high-strength geogrids have been more and more successfully used in recent times for the construction of steep slopes and geogrid...
2017 / Martin Ziegler -
Coupling Effect of Waste Automotive Engine Oil in the Preparation of Wood Reinforced LDPE Plastic Composites for Panels
Abstract We demonstrated the formulation of wood plastic composite (WPC) materials with flexural strength of 13.69 ± 0.09 MPa for applications in outdoor fencing using municipal waste precursors like low density polyethylene (LDPE) plastics...
2017 / Maame Adwoa Bentumah Animpong, William Owusu Oduro, Joyce Koranteng, Kofi Ampomah-Benefo, Gloria Boafo-Mensah, et al. -
Treatment of rabbit growth plate injuries with oriented ECM scaffold and autologous BMSCs2017 / Wenchao Li, Ruijiang Xu, Jiangxiang Huang, Xing Bao, Bin Zhao
-
Forecasting Method of Consumption Spare Parts of Mutual Support System Based on Stochastic Process
Abstract Considering the characteristics of mutual support system in which unit fault leads to the failure rate mutation, through the analysis of practical problems, using the theory of stochastic process, the paper gives the procedure and method of ...
2017 / Liu Shenyang, Huang Zhijie, Zhu Qian, Zhu Chen