Materials engineering topic list of research papers
-
Vacuum Venting Enhances the Replication of Nano/Microfeatures in Micro-Injection Molding Process2016 / Seong Ying Choi, Nan Zhang, J. P. Toner, G. Dunne, Michael D. Gilchrist
-
A novel source of atomic hydrogen for passivation of defects in silicon2017 / Phillip Hamer, Gabrielle Bourret-Sicotte, George Martins, Alison Wenham, Ruy S. Bonilla, et al.
-
Plasma impact on diagnostic mirrors in JET
Abstract Metallic mirrors will be essential components of all optical systems for plasma diagnosis in ITER. This contribution provides a comprehensive account on plasma impact on diagnostic mirrors in JET with the ITER-Like Wall. Specimens from the...
2017 / A. Garcia-Carrasco, P. Petersson, M. Rubel, A. Widdowson, E. Fortuna-Zalesna, et al. -
A Study on the Mechanical Behaviors of Jute-polyester Composites
Abstract In the present exposition, coupon specimens extracted from jute-polyester laminates fabricated by the hand layup method combined with compression molding are subjected to tensile, compression and flexural tests in a UTM. Next a novel hybrid ...
2017 / Anindya Deb, Sumitesh Das, Ashok Mache, Rokesh Laishram -
Experimental Test for Estimation of Buckling Load on Unstiffened Cylindrical shells by Vibration Correlation Technique
Abstract Non-destructive methods to estimate the actual buckling load in particularly for imperfection sensitive thin-walled structures, are of severe interest among many fields. Particular techniques for validation of structural limit state and...
2017 / Eduards Skukis, Olgerts Ozolins, Kaspars Kalnins, Mariano A. Arbelo -
Cracking in Flexural Reinforced Concrete Members
Abstract The system of cracks developing in reinforced concrete is in many aspects essential when modelling structures in both serviceability- and ultimate limit state. This paper discusses the behavior concerning crack development in flexural...
2017 / Annette Beedholm Rasmussen, Jakob Fisker, Lars German Hagsten -
Carbothermal reduction process of silica formed from shirasu volcanic ash using solar furnace2016 / Keisuke Hatakeyama, Keigo Sato, Kensuke Nishioka
-
Blast Protection of Infrastructure with Fluid Filled Cellular Polymer Foam
Abstract Full field blast experiments were performed to assess the potential of fluid filled polymer foam for blast mitigation. The experiments involve air blast loading of clamped mild steel plates covered with fluid filed polymer foam for blast...
2017 / K. Venkataramana, Ram Kumar Singh, Anindya Deb, Vivek Bhasin, K.K. Vaze, et al. -
Structural and Functional Characterizations of Al+Implanted 4H-SiC Layers and Al+Implanted 4H-SiCp-nJunctions after 1950°C Post Implantation Annealing2016 / Roberta Nipoti, Antonella Parisini, Giovanna Sozzi, Maurizio Puzzanghera, Andrea Parisini, et al.
-
Interaction energy of interface dislocation loops in piezoelectric bi-crystals
Abstract Interface dislocations may dramatically change the electric properties, such as polarization, of the piezoelectric crystals. In this paper, we study the linear interactions of two interface dislocation loops with arbitrary shape in...
2017 / Jianghong Yuan, Yin Huang, Weiqiu Chen, Ernian Pan -
Effect of the forming process on the microstructure of aluminium parts for collective transports2013 / B. Diawara, J. Bouquerel, J.-B. Vogt, D. Najjar, M. Dubar
-
Chemical Technologies for Modern Concrete Production
Abstract Modern era is linked with global issues in limited energy resources and ecological degradation as hurdles for sustainable industrialization and urbanization. In these contexts, concretes are the most widely adopted construction materials to ...
2017 / Yohannes L. Yaphary, Raymond H.W. Lam, Denvid Lau -
Bridging Effective Stress and Soil Water Retention Equations in Deforming Unsaturated Porous Media: A Thermodynamic Approach2017 / J. M. Huyghe, E. Nikooee, S. M. Hassanizadeh
-
Perspective: Oxide molecular-beam epitaxy rocks!2015 / Darrell G. Schlom
-
Fatigue Damage Assessment of RC Column using PZT Sensors
Abstract Due to ruggedness, cost-effectiveness and high damage sensitivity, PZT sensors have been effectively used for structural health monitoring. Health monitoring is the continuous measurement of the loading environment and the critical...
2017 / Moin ul Haq, S. Bhalla, Tabassum Naqvi -
Modeling of Liquefaction using Two-phase FEM with UBC3D-PLM model
Abstract Soil liquefaction describes a loss of strength of saturated sand upon sudden or cyclic loading. A slight disturbance of such a soil's fabric might lead to severe damage, e.g. the collapse of sea dikes. Accurate modeling of the state...
2017 / Elizaveta Wobbes, Lars Beuth, Cornelis Vuik, Dieter Stolle -
Expert Review of Metro Escalators Safety
Abstract Upon outspending of the service term by metro tunnel escalators, it is important to determine the degree of escalators wear and the term of remaining life. To ensure safety of metro tunnel escalators in such cities as Moscow and St....
2017 / Oleg Bardyshev, Valery Popov, Pyotr Druzhinin, Andrey Bardyshev -
Types and characteristics of carbonate reservoirs and their implication on hydrocarbon exploration: A case study from the eastern Tarim Basin, NW China
Abstract Carbonate rocks are deposited in the Ordovician, Cambrian, and Sinian of eastern Tarim Basin with a cumulative maximum thickness exceeding 2000 m. They are the main carriers of oil and gas, and a great deal of natural gas has been found...
2017 / Shiwei Huang, You Zhang, Xingping Zheng, Qifa Zhu, Guanming Shao, et al. -
Microstructure-dependent DC set switching behaviors of Ge–Sb–Te-based phase-change random access memory devices accessed by in situ TEM2015 / Kyungjoon Baek, Kyung Song, Sung Kyu Son, Jang Won Oh, Seung-Joon Jeon, et al.
-
Computational analysis of metallic nanowire-elastomer nanocomposite based strain sensors2015 / Sangryun Lee, Morteza Amjadi, Nicola Pugno, Inkyu Park, Seunghwa Ryu