Materials engineering topic list of research papers
-
Variable Compliance-related Aspects of Chatter in Turning Thin-walled Tubular Parts
Abstract Thin tubular parts are often subject to turning process during manufacturing. The increasing compliance of the workpiece, which is associated to tool displacement and to matter removal, can give rise to chatter, leading to poor surface...
2015 / Artem Gerasimenko, Mikhail Guskov, Jérôme Duchemin, Philippe Lorong, Alexander Gouskov -
Prediction of Wear Behaviour of Almg1sicu Hybrid MMC Using Taguchi with Grey Rational Analysis
Abstract In this paper, investigation focuses on preparing hybrid metal matrix composites of AlMg1SiCu alloy as base material by incorporating 9% SiC and varying 3 to 9% of graphite particulates varying insteps of 3 by vortex method. The wear and...
2014 / G. Bala Narasimha, M. Vamsi Krishna, R. Sindhu -
The Artificial Additives Effect to Soil Deformation Characteristics of Oil and Oil Products Storage Tanks Foundation
Abstract The comprehensive analysis was carried for searching the ways of load reduction to the environment in the process of oil and oil products tanks construction and maintenance. The laboratory studies results of expanded polystyrene granules...
2015 / A.V. Gruzin, V.V. Tokarev, V.V. Shalai, Yu.V. Logunova -
Neutron Irradiation Swelling of SiC and SiCf/SiC for Advanced Nuclear Applications
Abstract Silicon carbide (SiC) is used as a layer in TRISO fuel of high temperature gas-cooled reactors because of its excellent thermal and mechanical properties. SiC fiber-reinforced SiC composites (SiCf/SiC) are also a candidate material for...
2015 / Mohd Idzat Idris, Hiroshi Konishi, Masamitsu Imai, Katsumi Yoshida, Toyohiko Yano -
Feasibility of Fueling PWRs with Fuel Discharged from Breed and Burn Reactors
Abstract The fuel discharged from Breed and Burn (B&B) reactors contains a relatively high content of fissile plutonium (∼10%). This study assesses the feasibility of reducing this fissile content while increasing the fuel utilization by loading ...
2015 / Christian Di Sanzo, Jasmina Vujic, Ehud Greenspan -
Hybrid Fabrication of a 3D Printed Geometry Embedded with PCL Nanofibers for Tissue Engineering Applications
Abstract A machine tool for the automatic fabrication of biocompatible scaffolds with embedded nanofibers mats was built. In this novel process, the scaffolds produced by Fused Deposition Modeling (FDM) were embedded with polycaprolactone (PCL)...
2015 / Christian Mendoza-Buenrostro, Hernan Lara, Ciro Rodriguez -
Problem-Based Learning And Nature of Science: A Study With Science Teachers
Abstract Problem-Based Learning, a methodology that builds on problems to develop students’ new knowledge, can also be useful in helping students to learn Nature of Science. Prospective science teachers’ conceptions regarding Nature of Science and...
2015 / Sara Moutinho, Joana Torres, Isabel Fernandes, Clara Vasconcelos -
Influence of Thermal and Magnetic Field on Vibration of Double Walled Carbon Nanotubes Using Nonlocal Timoshenko Beam Theory
Abstract In this paper, the influence of thermal and magnetic field on transverse vibration of double walled carbon nanotubes are investigated using nonlocal Timoshenko beam theory. The governing equation of motion with small scale effects are...
2015 / P. Ponnusamy, A. Amuthalakshmi -
Proximity-induced magnetism in transition-metal substituted graphene2015 / Charles B. Crook, Costel Constantin, Towfiq Ahmed, Jian-Xin Zhu, Alexander V. Balatsky, et al.
-
Study on Correlation of Aerodynamic Heating Data of a Combination Model
Abstract To study the correlation of aerodynamic heating of hypersonic vehicle, surface heat flux of different scale models in various flow conditions are obtained by means of wind tunnel, numerical simulation and engineering calculation. The...
2015 / Sha Xin-guo, Chen Xing, Ji Feng, Su Peng-hui -
A scaling law for form drag coefficients in incompressible turbulent flows
Abstract We present a similarity law for form drag coefficients, which is obtained by a judicious utilization of an energy dissipation equation due to eddy viscosity for incompressible turbulent flow, the steady-state κ–ω turbulence model, and the...
2014 / Yeon-Seung Lee, Soonhung Han, K.C. Park -
High temperature x ray diffraction determination of the body-centered-cubic–face-centered-cubic transformation temperature in (Fe70Ni30)88Zr7B4Cu1 nanocomposites2012 / J. J. Ipus, P. Herre, P. Ohodnicki, M. E. McHenry
-
Carbon nanotubes coated to reduce health risks2014 / Laurie Donaldson
-
Three-dimensional Analyses of Functionally Graded Multi-layered Systems
Abstract Functionally Graded Materials (FGMs) are composites with continuously varying volume fractions of their constituent homogeneous phases. When the characteristic length scale of such variations is much larger than the size of the phases, the...
2014 / Roberta Sburlati -
Building blocks for correlated superconductors and magnets2015 / J. L. Sarrao, F. Ronning, E. D. Bauer, C. D. Batista, J.-X. Zhu, et al.
-
Modeling of Intermetallic Compounds Growth Between Dissimilar Metals2015 / Li Wang, Yin Wang, Philip Prangnell, Joseph Robson
-
Two-scale Modeling of DP Steel Incorporating Distributed Properties Inside Micro-constituents
Abstract Advanced High Strength Steels (AHSS) are increasingly used in the industry due to their excellent strength and formability properties enabling weight savings. In this wide class of steel we restrict ourselves to the modeling of Dual Phase...
2014 / Jörg Schröder, Ashutosh Gandhi, Daniel Balzani -
Shape Memory Alloys Behaviour: A Review
Abstract Shape memory alloys are used in a variety of fields, such as medical or aeronautical. Other fields of knowledge have been researching these materials, attracted by their capacity to dissipate energy through high-strain hysteretic cycles...
2015 / Paulo Silva Lobo, João Almeida, Lúıs Guerreiro -
Rolling of AZ31 Magnesium Alloy Strip Using Induction Heating Rolls
Abstract Magnesium alloy strips are difficult to produce through cold forming process due to their poor deformation ability. In this article, fabrication of AZ31 alloy strip by Hot-roller warm rolling process was studied. Experiment using induction...
2014 / Ban Cai, Changsheng Li, Jian Zhang, Yanlei Song, Jianjun Zheng -
New developments in caloric materials for cooling applications2015 / S. Crossley, N. D. Mathur, X. Moya