Materials engineering topic list of research papers
-
Nature Inspired Algorithms in Remote Sensing Image Classification
Abstract Remote Sensing involves a wide variety of techniques for Image Classification of land cover features of different terrains. Different traditional image classifiers are present for appropriate use of land. However, these features are not...
2015 / Shruti Goel, Manas Gaur, Eshaan Jain -
Effect of Heat Treatment on the Mechanical Properties of Two-Phase Titanium Alloy Ti6al7nb/ Wpływ Obróbki Cieplnej Na Własności Mechaniczne Dwufazowego Stopu Tytanu Ti6al7nb2015 / R. Dąbrowski
-
Sintering temperature effect on density, structural and morphological properties of Mg- and Sr-doped ceria
Abstract Strontium and magnesium doped ceria solid solutions (Ce0.99Sr0.01O1.995 and Ce0.99M0.01O1.995) were synthesized by a cost effective solid state reaction. The doped and un-doped CeO2 samples were sintered at 1200°C, 1300°C and 1400°C to...
2015 / Syed Ismail Ahmad, P. Koteshwar Rao, Iizhar Ahmed Syed -
Fracture Assessment of Axial Crack in Steel Pipe under Internal Pressure
Abstract Fracture assessment of axial crack in steel pipe subjected to internal pressure is reviewed. Assessment results were obtained using different methods FC, GS and FAD in order to compare between their results and facilitate their use in any...
2015 / M. El-Sayed, A. El Domiaty, A-H.I. Mourad -
Optimization of the Antireflection Coating of Thin Epitaxial Crystalline Silicon Solar Cells
Abstract In this work we use an effective weighting function to include the internal quantum efficiency (IQE) and the effective thickness, Te, of the active cell layer in the optical modeling of the antireflection coating (ARC) of very thin...
2015 / Josefine K. Selj, David Young, Sachit Grover -
Sensor Array Design and Development of Smart Sensing System for Kick Force Visualization in Soccer
Abstract Kicking performance in soccer is a major skill that can strongly influence the success of a team. A low-cost sensing platform was designed and developed to visualize the forces between a ball and smart sensing system. The instrumentation,...
2015 / Yehuda Weizman, Franz Konstantin Fuss -
Ceramics with photonic and optical applications
Abstract There is a fast growing interest in new applications for advanced ceramic systems in the field of functional materials and in particular for optical materials. Ceramics are entitled to fulfil the gap between glasses and single crystals in...
2015 / Victor M. Orera, Rosa I. Merino -
Mineralogy under extreme conditions
Abstract We have performed measurements of minerals based on the synchrotron source for single crystal and powder X-ray diffraction, inelastic scattering, spectroscopy and radiography by using diamond anvil cells. We investigated the properties of...
2011 / Jinfu Shu -
CFD Analysis of Turbo Expander for Cryogenic Refrigeration and Liquefaction Cycles
Abstract Computational Fluid Dynamics analysis has emerged as a necessary tool for designing of turbomachinery. It helps to understand the various sources of inefficiency through investigation of flow physics of the turbine. In this paper, 3D...
2015 / Rahul Verma, Ashish Alex Sam, Parthasarathi Ghosh -
Development of Helium Leak Testing System and Procedure for testing Welds of Steam Generator
Abstract The main function of Steam Generator (SG) in FBR is to extract the reactor heat through secondary sodium system and convert the feed water into superheated steam in the tubes of SG. The Steam Generator is a vertical, once through, shell and ...
2011 / R.M. Shriwardhankar, P.B. Patil, Mahesh Limaye -
Effect of grain size on the indentation hardness for polycrystalline materials by the modified strain gradient theory
Abstract Numerous indentation tests in the micrometer and nanometer scale have shown that the measured hardness decreases significantly with increasing indentation depth, and this is known as the indentation size effect (ISE). However, several other ...
2013 / Bong-bu Jung, Hun-kee Lee, Hyun-chul Park -
Influence of mould thermal properties on the replication of micro parts via injection moulding
Abstract The surface quality that results when replicating micro features is one of the most important process characteristics in micro injection moulding, and it constitutes a manufacturing constraint in applying the technique to a wider range of...
2012 / G. Lucchetta, E. Ferraris, G. Tristo, D. Reynaerts -
Anisotropy of the Mechanical Properties of Twin-roll Cast, Rolled and Heat-treated AZ31 as a Function of Temperature and Strain rate
Abstract The influence of temperature on the mechanical properties of twin-roll cast, rolled and heat-treated AZ31 was investigated under tensile loading from different directions (0°, 90). Therefore, quasi-static tensile tests with a strain rate of ...
2015 / F. Berge, L. Krüger, M. Ullmann, C. Krbetschek, R. Kawalla -
In silico prediction and screening of modular crystal structures via a high-throughput genomic approach2015 / Yi Li, Xu Li, Jiancong Liu, Fangzheng Duan, Jihong Yu
-
Simulation of melting of a nano-enhanced phase change material (NePCM) in a square cavity with two heat source–sink pairs
Abstract Melting of a NePCM in a square cavity with different arrangements of two heat source–sink pairs flush-mounted on the vertical sidewalls is investigated numerically. The governing equations were solved on a non-uniform mesh using a...
2015 / Aziz Ebrahimi, Abdolrahman Dadvand -
Micro- and Nanoscale Hydrogel Systems for Drug Delivery and Tissue Engineering2009 / Christine T. Schwall, Ipsita A. Banerjee
-
Surface and Sub Surface Evaluation in Coated-Wire Electrical Discharge Machining (WEDM) of INCONEL® Alloy 718
Abstract Wire Electrical Discharge Machining (WEDM) is one of the most versatile and useful technological processes for cutting complex shapes made of conductive materials such as those typical of aerospace applications. With the aim to optimize...
2015 / E. Atzeni, E. Bassoli, A. Gatto, L. Iuliano, P. Minetola, et al. -
Review Article-Renewable Energies
Abstract A majority of the communities around the world rely heavily on oil, natural gas and coal for their energy needs. These fuels draw on lots of resources that will eventually diminish, which in turn makes them too expensive or too...
2015 / Javid Mohtasham -
Experimental Investigation on Critical Reynolds Numbers Aerodynamic Properties of Low Aspect Ratios Wings
Abstract The aerodynamic properties of lift, drag, slopes of lift curves and corresponding flow structures with interaction of separated shear layer and wingtip roll up vortex on the leeside of low aspect ratios wings at critical Reynolds numbers...
2014 / Yi-Chung Liu, Fei-Bin Hsiao -
Progress in Nuclear Power Technologies and Implications for ASEAN
Abstract Since its inception, the nuclear industry has committed strongly to enhancing the safety features of Light Water Reactors (LWRs). Unfortunately, the series of nuclear accidents from Three Mile Island, to Chernobyl, and Fukushima led to...
2015 / Victor Nian