Materials engineering topic list of research papers
-
The Effect Of Mechanical Interactions Between The Casting And The Mold On The Conditions Of Heat Dissipation: A Numerical Model2015 / R. Dyja, E. Gawrońska, N. Sczygiol
-
Textured Sb2Te3 films and GeTe/Sb2Te3 superlattices grown on amorphous substrates by molecular beam epitaxy2017 / Jos E. Boschker, E. Tisbi, E. Placidi, Jamo Momand, Andrea Redaelli, et al.
-
A Computational Framework for Cloud-based Machine Prognosis
Abstract Prognosis of machine degradation and failure propagation is essential to preventative maintenance scheduling and sustainable manufacturing. Emerging technologies such as Internet of Things (IoT) and cloud computing offer new opportunities...
2017 / Peng Wang, Robert X. Gao, Dazhong Wu, Janis Terpenny -
Design of a new experimental loop and of a coolant purifying system for corrosion experiments of EUROFER samples in flowing PbLi environment
Abstract The use of ferritic/martensitic RAFM steels in PbLi blanket applications requires a better understanding of material compatibility related to physical/chemical corrosion phenomena in the 450–550°C temperature range. The impact of corrosion...
2017 / D. Martelli, G. Barone, M. Tarantino, M. Utili -
Key factors affecting mechanical behavior of metallic glass nanowires2017 / Qi Zhang, Qi-Kai Li, Mo Li
-
Reduction of temperature in silicon photovoltaic module using thermal radiation coating2016 / Satoshi Nakamura, Kensuke Nishioka
-
The Grand Challenges in Smart Materials Research2014 / Seung-Bok Choi
-
The influence of the edge effect on the skyrmion generation in a magnetic nanotrack2017 / N. Ran, G. P. Zhao, H. Tang, L. C. Shen, P. Lai, et al.
-
Ethanol gas sensor based upon ZnO nanoparticles prepared by different techniques
Abstract Nowadays, applications of nanosized materials have been an important issue in basic and applied sciences. In this investigation, Zinc Oxide (ZnO) nanoparticles were prepared by two different techniques (simple heat treatment, thermal...
2017 / Sonik Bhatia, Neha Verma, R.K. Bedi -
A study of incremental sheet forming by using water jet2017 / B. Lu, M. W. Mohamed Bazeer, J. F. Cao, S. Ai, J. Chen, et al.
-
Multilayer radar absorbing material processing by using polymeric nonwoven and conducting polymer2009 / Luiza de Castro Folgueras, Mirabel Cerqueira Rezende
-
Thermodynamically controlled crystallization of glucose pentaacetates from amorphous phase2016 / P. Wlodarczyk, L. Hawelek, A. Hudecki, A. Wlodarczyk, A. Kolano-Burian
-
Glucose Sensing by an Enzyme-modified ZnO-based FET
Abstract Characteristics of an enzyme-modified field-effect transistor (EnFET) made of a ZnO-based ion-sensitive FET with immobilized glucose oxidase on the gate surface are studied for the application to healthcare chips. The EnFET was found to be...
2017 / Kazuto Koike, Yuina Mori, Shigehiko Sasa, Yuichi Hirofuji, Mitsuaki Yano -
Electronic Principles of Hydrogen Incorporation and Dynamics in Metal Hydrides2012 / Nenad Ivanović, Nikola Novaković, Ivana Radisavljević, Ljiljana Matović, Jasmina Grbović Novaković
-
Mechanical Properties of High-Mn Austenitic Steel Tested under Static and Dynamic Conditions2016 / L. A. Dobrzański, W. Borek, J. Mazurkiewicz
-
An intelligent artificial throat with sound-sensing ability based on laser induced graphene2017 / Lu-Qi Tao, He Tian, Ying Liu, Zhen-Yi Ju, Yu Pang, et al.
-
The Influence of the Asymmetric Arb Process on the Properties of Al-Mg-Al Multi-Layer Sheets / Wpływ Asymetrii W Procesie Arb Na Właściwości Wielowarstwowych Blach Al-Mg-Al2016 / A. Wierzba, S. Mróz, P. Szota, A. Stefanik, R. Mola
-
Surface and Bulk Carbide Transformations in High-Speed Steel2015 / M. Godec, T. Večko Pirtovšek, B. Šetina Batič, P. McGuiness, J. Burja, et al.
-
Modeling and simulation of bulk gallium nitride power semiconductor devices2016 / G. Sabui, P. J. Parbrook, M. Arredondo-Arechavala, Z. J. Shen
-
Buckling of Microtubules on a 2D Elastic Medium2015 / Arif Md. Rashedul Kabir, Daisuke Inoue, Tanjina Afrin, Hiroyuki Mayama, Kazuki Sada, et al.