Materials engineering topic list of research papers
-
The strain induced band gap modulation from narrow gap semiconductor to half-metal on Ti2CrGe: A first principles study2015 / Jia Li, Zhidong Zhang, Zunming Lu, Hongxian Xie, Wei Fang, et al.
-
3D Printed Electrophoretic Lab-on-chip for DNA Separation
Abstract In this paper we present for the first time inkjet 3D printed lab-on-a-chip for DNA analyse by on-chip gel electrophoresis. Separation of 50÷800bp DNA ladder was successfully performed. According to our best knowledge it is the first...
2017 / K. Adamski, W. Kubicki, R. Walczak -
Automatic Decomposition of Complex thin Walled CAD Models for Hexahedral Dominant Meshing
Abstract This paper describes an automatic method for identifying thin-sheet regions (regions with large lateral dimensions relative to the thickness) for complex thin walled components, with a view to using this information to guide the hex meshing ...
2016 / Liang Sun, Christopher M. Tierney, Cecil G. Armstrong, Trevor T. Robinson -
(Sm,Zr)(Fe,Co)11.0-11.5Ti1.0-0.5 compounds as new permanent magnet materials2016 / Tomoko Kuno, Shunji Suzuki, Kimiko Urushibata, Kurima Kobayashi, Noritsugu Sakuma, et al.
-
Self-assembly of Carbon Vacancies in Sub-stoichiometric ZrC1−x2015 / Yanhui Zhang, Bin Liu, Jingyang Wang
-
Three-dimensional CAD Model Retrieval Algorithm Based on Ontology
Abstract For resolving problems such as how the user implement three-dimensional CAD model retrievals and how to reuse the retrieval results during the smart process planning, this paper present an ontology-based algorithm for three-dimensional CAD...
2016 / Mingcong Huang, Shaocun Sui, Wenping Mou, Shusheng Zhang, Wenjun Cao -
Crystallization and thermophysical properties of Cu46Zr47Al6Co1 bulk metallic glass2013 / Kang Wu, Ran Li, Tao Zhang
-
(0 0 2)-oriented growth and morphologies of ZnO thin films prepared by sol-gel method2016 / Dongyun Guo, Yang Ju, Chengju Fu, Zhixiong Huang, Lianmeng Zhang
-
Characterization of Temperature Gradients on MEMS Acceleration Sensors
Abstract MEMS acceleration sensors have been systematically analyzed across a wide temperature range between -40°C and +85°C. Failure mechanisms such as offset drift induced by thermal mismatch of different materials are well understood. However, in ...
2017 / Cristian Nagel, Frederik Ante, Martin Putnik, Johannes Classen, Jan Mehner -
Cadmium free high efficiency Cu2ZnSn(S,Se)4 solar cell with Zn1−xSnxOy buffer layer
Abstract We have investigated the simulation approach of a one-dimensional online simulator named A Device Emulation Program and Tool ( ADEPT ...
2017 / Md. Asaduzzaman, Ali Newaz Bahar, Md. Mohiuddin Masum, Md. Mahmodul Hasan -
Large Eddy Simulation of a Steady Flow Test Bench Using OpenFOAM®
Abstract Stationary flow bench testing is a standard experimental methodology used by the automotive industry to characterize a cylinder head. In order to reduce the development time, the use of a CFD-based virtual test bench is nowadays a standard...
2016 / Cristian Catellani, Giulio Cazzoli, Stefania Falfari, Claudio Forte, Gian Marco Bianchi -
Novel Antenna Structure for Early Breast Cancer Detection
Abstract Low cost miniaturized efficient ultra-wideband (UWB) antenna dedicated to a non-invasive technique for early breast cancer detection is studied mathematically, designed, simulated, fabricated and tested. The new design is composed of a...
2017 / A. Afyf, L. Bellarbi, N. Yaakoubi, E. Gaviot, L. Camberlein, et al. -
Anisotropic thermal conductivity of thin polycrystalline oxide samples2013 / A. Tiwari, K. Boussois, B. Nait-Ali, D. S. Smith, P. Blanchart
-
Implementing Key Performance Indicators for Energy Efficiency in Manufacturing
Abstract Energy is an important input factor in today's manufacturing and measuring the efficiency of energy employment is essential for companies to meet ecological and economical goals. Despite the recent development in both academia and industry, ...
2017 / Christopher Schmidt, Wen Li, Sebastian Thiede, Bernard Kornfeld, Sami Kara, et al. -
Ecoceramics2017 / Robert C. Pullar, Rui M. Novais
-
Residual stresses and mechanical properties of Si3N4/SiC multilayered composites with different SiC layers
Abstract The effect of residual stresses on the strength, toughness and work of fracture of Si3N4/SiC multilayered composites with different SiC layers has been investigated. It may be an effective way to design and optimize the mechanical...
2017 / Shichao Liu, Yuanming Li, Ping Chen, Wenjie Li, Shixin Gao, et al. -
Dynamic stabilities of icosahedral-like clusters and their ability to form quasicrystals2016 / Xiaogang Liang, Ilyar Hamid, Haiming Duan
-
Three-dimensional (3D) α-Fe2O3/polypyrrole (PPy) nanocomposite for effective electromagnetic absorption2016 / Wanchun Jiang, Mengxiao Sun, Kun Zhang, Fan Wu, Aming Xie, et al.
-
Large bandgap blueshifts in the InGaP/InAlGaP laser structure using novel strain-induced quantum well intermixing2016 / A. A. Al-Jabr, M. A. Majid, M. S. Alias, D. H. Anjum, T. K. Ng, et al.
-
Nature as a network of morphological infocomputational processes for cognitive agents2017 / Gordana Dodig-Crnkovic