Materials engineering topic list of research papers
-
Influence of Nb-doping on Hydrogen Sensing Performance of WO3 Nanowires
Abstract Tungsten oxide nanowires were synthetized by thermal oxidation in vacuum, using a custom tubular furnace, adding niobium in the growth process to evaluate the influence of niobium in the conductometric response towards hydrogen gas. ...
2017 / D. Zappa, A. Bertuna, E. Comini, N. Poli, G. Sberveglieri -
Metal-free supercapacitor with aqueous electrolyte and low-cost carbon materials2017 / Nicklas Blomquist, Thomas Wells, Britta Andres, Joakim Bäckström, Sven Forsberg, et al.
-
Large enhanced perpendicular magnetic anisotropy in CoFeB/MgO system with the typical Ta buffer replaced by an Hf layer2012 / T. Liu, J. W. Cai, Li Sun
-
A possible anorthositic continent of early Mars and the role of planetary size for the inception of Earth-like life
Abstract The Moon has an anorthositic primordial continental crust. Recently anorthosite has also been discovered on the Martian surface. Although the occurrence of anorthosite is observed to be very limited in Earth's extant geological record, both ...
2017 / James M. Dohm, Shigenori Maruyama, Motoyuki Kido, Victor R. Baker -
Spur Gears Static and Dynamic Meshing Simulation and Tooth Stress Calculation2015 / Ali Jammal, Hui Wang, Yiming Rong
-
Estimation the Remaining SERVICE-Lifetime of Wooden Structure of GEOTHERMAL Cooling Tower
Abstract Similar with other construction materials, wood strength is decreasing when applied by long term loading. Wooden cooling tower structure at Star Energy Geothermal (Wayang Windu) Ltd was built in 1998 and it should be evaluated to avoid...
2017 / Effendi Tri Bahtiar, Naresworo Nugroho, Mohamad Miftah Rahman, Arinana, Rita Kartikasari, et al. -
Hydrogen Fuel Cell Pick and Place Assembly Systems: Heuristic Evaluation of Reconfigurability and Suitability
Abstract Proton Exchange Membrane Fuel Cells (PEMFCs) offer numerous advantages over combustion technology but they remain economically uncompetitive except for in niche applications. A portion of this cost is attributed to a lack of assembly...
2017 / Mussawar Ahmad, Bilal Ahmad, Bugra Alkan, Daniel Vera, Robert Harrison, et al. -
Localized electromechanical interactions in ferroelectric P(VDF-TrFE) nanowires investigated by scanning probe microscopy2016 / Yonatan Calahorra, Richard A. Whiter, Qingshen Jing, Vijay Narayan, Sohini Kar-Narayan
-
Effective directional self-gathering of drops on spine of cactus with splayed capillary arrays2015 / Chengcheng Liu, Yan Xue, Yuan Chen, Yongmei Zheng
-
Specimen Inertia in high strain rate tensile testing2015 / Meyrick Hockly, Clive R. Siviour
-
Experimental Study on Grouting Foundation Treatment of Immersed Tunnel
Abstract Grouting method is one of foundation treatment methods of immersed tube tunnel, it has good effects on improvement of foundation strength and control of settlement deformation, but there is no mature method yet available for the...
2016 / Ke Li -
Corrosion Behaviour of Austempered Ductile Iron Produced by Forced Air Quenching Method in a Simulated Mine Water
Abstract The production of austempered ductile iron (ADI) with uniform microstructure and properties is constrained by the austempering process vis-à-vis the quenching medium. This is as a result of the stringent operating parameters with costly...
2016 / Oladeji O. Ige, Oluyemi J. Olawale, Kunle M. Oluwasegun, Sunday Aribo, Babatunde A. Obadele, et al. -
Diffusion in Saturated Clayey Barrier Medium
Abstract The design of clay/clayey barriers for the containment of buried wastes conventionally has been based on the assumption that the hydraulic conductivity controls the rate of leachate percolation. However, recent studies show that diffusion...
2016 / E.E. Agbenyeku, E. Muzenda, M.I. Msibi -
Measuring the Electronic Properties of DNA-Specific Schottky Diodes Towards Detecting and Identifying Basidiomycetes DNA2016 / Vengadesh Periasamy, Nastaran Rizan, Hassan Maktuff Jaber Al-Ta’ii, Yee Shin Tan, Hairul Annuar Tajuddin, et al.
-
Development and substantiation of the universal working organs parameters of sloped processing with minimal technologies
Abstract The article considers the problem of reducing energy consumption in the mountainous arable farming and approved that one of the effective ways to solve this problem is minimal technology of tillage machines with disk working organs, using...
2016 / A.P. Tarverdyan, P.A. Tonapetyan -
Recent development of two-dimensional transition metal dichalcogenides and their applications
Recent advances in atomically thin two-dimensional transition metal dichalcogenides (2D TMDs) have led to a variety of promising technologies for nanoelectronics, photonics, sensing, energy storage, and opto-electronics, to name a few. This article reviews the...
2017 / Wonbong Choi, Nitin Choudhary, Gang Hee Han, Juhong Park, Deji Akinwande, et al. -
Effect of thermal treatment on Zn nanodisks2015 / Pedro E. Acuña-Avila, Roberto López, Enrique Vigueras-Santiago, Susana Hernández-López, Marco Camacho-López, et al.
-
Thermal Conductivity of Heat Insulation Material Made From Coniferous Needles with Potato Starch Binder
Abstract In previous experiments made by authors of this research about the possibilities to produce thermal insulation material from coniferous greenery (needles and thin branches), it was found that there is not enough natural resin in coniferous...
2016 / Indra Muizniece, Dagnija Blumberga -
System of High-performance Cutting with Enhanced Combined Effect of Cooling and Lubrication Medium Based on Ranque-hilsch Effect
Abstract Presents the results of the study of the main factors for improvement of the efficiency of high-performance cutting of structural steels. It has been revealed that such improvement should be implemented on the basis of simultaneous...
2017 / Alexander Naumov, Alexey Vereschaka, Andre Batako, Anatoly Vereschaka -
The Flood Impact Assessment from Ilisua Catchment Area on the Environment
Abstract In the first part of the paper are making a geomorphologic description of the catchment area and the flash floods taken into account. All these events show the vulnerability of the catchment area studied to hydro morphological and...
2016 / Mihaela Pisleaga, Codruta Badaluta-Minda