Materials engineering topic list of research papers
-
Research Update: The mechanocaloric potential of spin crossover compounds2016 / Karl G. Sandeman
-
Initial results of tests of depth markers as a surface diagnostic for fusion devices
Abstract The Accelerator-Based In Situ Materials Surveillance (AIMS) diagnostic was developed to perform in situ ion beam analysis (IBA) on Alcator C-Mod in August 2012 to study divertor surfaces between shots. These results were limited to studying ...
2016 / L.A. Kesler, B.N. Sorbom, Z.S. Hartwig, H.S. Barnard, G.M. Wright, et al. -
Indentation Hardness Measurements at Macro-, Micro-, and Nanoscale: A Critical Overview2016 / Esteban Broitman
-
Optical absorption of one-particle electron states in quasi-zero-dimensional nanogeterostructures: Theory
Abstract The paper is devoted to the theory for the interaction of an electromagnetic field with one-particle quantum-confined states of charge carriers in semiconductor quantum dots. It is demonstrated that the oscillator strengths and dipole...
2016 / Sergey I. Pokutnyi, Yuriy N. Kulchin, Vladimir P. Dzyuba -
The Optimal Charging Method Research for Lithium-ion Batteries Used in Electric Vehicles
Abstract This paper aimed to propose a novel charging method for the lithium-ion batteries with negative pulse charging theory. Firstly the second order Thevenin model was built to determine the internal parameters of the battery. On the foundation...
2016 / Wang Zhifu, Wang Yupu, Li Zhi, Song Qiang, Rong Yinan -
Tribological Properties of High Hardness ta-CNx Coatings Deposited by Filtered Arc Deposition with Block-on-Ring Tribotester
Abstract Low friction and high wear resistance are strongly needed desired in boundary lubrication condition for industrial usage. Carbon nitride (CNx) coating is one of the promising materials, but the hardness of conventional CNx coating was only...
2016 / Takafumi Hattori, Noritsugu Umehara, Hiroyuki Kousaka, Xinrui Deng, Kazuyoshi Manabe, et al. -
Research on Section Form of Submerged Floating Tunnels Considering Structural Internal Force Optimization under Fluid Action
Abstract Submerged floating tunnel, as a new type traffic structure crossing different waters, has short research history. However, because of its novelty and superiority, it has been a hot research topic. This paper takes the tunnel structure form...
2016 / Ke Li, Xinghong Jiang -
The System for Monitoring of the Fast Vertical Oscillations of VEPP-3 SR Beam
Abstract Due to the presence of a ripple on the output of various power sources, and mechanical vibrations the VEPP-3 wiggler beam is subject to certain perturbations (oscillations). Such disturbances can distort the results of precise experiments....
2016 / M.G. Fedotov -
Kinetic ways of tailoring phases in high entropy alloys2016 / Feng He, Zhijun Wang, Yiyan Li, Qingfeng Wu, Junjie Li, et al.
-
Integrated Design in Case of Digital Fabricated Buildings
Abstract The importance of the detailed BIM for buildings like the free-form building in our case cannot be emphasized enough in case of automated and especially additive manufacturing. Integral design of all building accessories like internal...
2016 / Andrej Tibaut, Nenad Čuš Babič, Matjaž Nekrep Perc -
Restoration and Renovation of Waste Water Pumping Stations in Case of Emergency
Abstract The article reveals issues of reconstruction and upgrading of pumping stations in case of emergency. The main problems to be faced with are lack of capacity, equipment wear and low treatment quality. The article focuses on methods and...
2016 / Nikolay Makisha -
A Critical Review of Endurance Limits of Bituminous Mixes for Developing Countries
Abstract Fatigue failure of any kind of material is of great concern while designing any component of Civil Engineering Structure. A fluctuating stress i.e. with positive and negative phase is the root cause of fatigue failure. Even controlling the...
2016 / Gagandeep Singh, Devesh Tiwari, P.K. Jain, A.K. Swami -
Innovative Method and Apparatus for Deep Cleaning of Soluble Salts from Mortars and Lithic Materials
Abstract A new method improves the quality and durability of decontamination by soluble salts, compared with conventional application of wraps. The salts inside the porous material are brought in solution by soaking with distilled water, then...
2016 / Giulia Torrielli, Laura Gaggero, Valentina Caratto, Maurizio Ferretti -
A Hybrid and Multiscale Approach to Model and Simulate Mobility in the Context of Public Events
Abstract Organizers of large events have to ensure efficient mobility to guarantee a smooth and secure event course. Traffic and crowd simulations help to predict weak spots on the event's infrastructure. Thus, we propose a hybrid and multiscale...
2016 / Daniel H. Biedermann, Carolin Torchiani, Peter M. Kielar, David Willems, Oliver Handel, et al. -
Effect of Ru Addition on the Mechanical Properties and Microstructure of 316L Austenitic Stainless Steel Weld Metal
Abstract The addition of Ru to the weld metal of 316L austenitic stainless steel (ASS) by Gas tungsten arc welding (GTAW) button welds has shown superior mechanical properties. In the present investigation, the effect of Ru additions on the physical ...
2016 / B.N. Zuma, J.W. van der Merwe -
Challenge in Design and Construction of Submerged Floating Tunnel and State-of-art
Abstract Submerged Floating Tunnel (SFT) is a new type of transport structure. It is different from the general bridges and tunnels engineering, it has a significant advantage over conventional structures in crossing long, large and deep water...
2016 / Yiqiang Xiang, Ying Yang -
Martensite and bainite in nanocrystalline steels: understanding, design and applications2015 / Francisca G. Caballero
-
Performance Analysis of an Optimization Management Algorithm on a Multi-generation Small Size Power Plant
Abstract In the last years, the carbon footprint reduction has gained great relevance in the energy industry. Thus, it is necessary to choose approaches that weight the results not only evaluating economic benefits but also emphasizing the...
2016 / Piero Danti, Lorenzo Pezzola, Sandro Magnani -
Characteristics of Plastic Scintillators Fabricated by a Polymerization Reaction
Abstract Three plastic scintillators of 4.5 cm diameter and 2.5-cm length were fabricated for comparison with commercial plastic scintillators using polymerization of the styrene monomer 2.5-diphenyloxazole (PPO) and 1,4-bis benzene (POPOP). Their...
2016 / Cheol Ho Lee, Jaebum Son, Tae-Hoon Kim, Yong Kyun Kim -
Displacement Response of Submerged Floating Tunnel Tube Due to Single Moving Load
Abstract In this paper, the submerged floating tunnel(SFT) tube is simplified as an elastically supported beam with two springs and dampings at each end. The kinematic equation for SFT tube under a single moving load is established to investigate...
2016 / Zhang Yuan, Dong Man-sheng, Ding Hao, Yang Long-chang