Materials engineering topic list of research papers
-
Housing and Climate Change-related Disasters: A Study on Architectural Typology and Practice
Abstract Climate change has become one of the greatest challenges in the XXI century. Complete picture of this phenomenon can be formed only by understanding the meaning and scope of both combating methods - mitigation and adaptation. A lot of...
2016 / Julija Aleksić, Saja Kosanović, Dušan Tomanović, Mirko Grbić, Vera Murgul -
Preface2016 / Dagnija Blumberga
-
An Ultrasonic Caliper Device for Measuring Acoustic Nonlinearity
Abstract In medical and industrial ultrasound, it is often necessary to measure the acoustic properties of a material. A specific medical application requires measurements of sound speed, attenuation, and nonlinearity to characterize livers being...
2016 / Christopher Hunter, Oleg A. Sapozhnikov, Adam D. Maxwell, Vera A. Khokhlova, Yak-Nam Wang, et al. -
Dynamic strain aging in Haynes 282 superalloy2014 / Magnus Hörnqvist, Ceena Joseph, Christer Persson, Jonathan Weidow, Haiping Lai
-
Effects of vibration frequency on vibration-assisted nano-scratch process of mono-crystalline copper via molecular dynamics simulation2016 / Bo Zhu, Hongwei Zhao, Dan Zhao, Peng Zhang, Yihan Yang, et al.
-
Effect of physical properties of Cu-Ni-graphite composites on tribological characteristics by grey correlation analysis
Abstract Cu-Ni-graphite composites are intended for using as switch slide baseplates materials in high-speed railways industrials. The tribological characteristics of Cu-Ni-graphite composites with different graphite content were affected by...
2016 / Yiran Wang, Yimin Gao, Liang Sun, YeFei Li, Baochao Zheng, et al. -
Inulin: A New Adjuvant With Unknown Mode of Action2016 / Mariusz Skwarczynski
-
A new approach on necking constitutive relationships of ductile materials at elevated temperatures
Abstract A new method is presented to determine the full-range, uniaxial constitutive relationship of materials by tensile tests on funnel specimens with small curvature radius and finite element analysis (FEA). An iteration method using FEA APDL...
2016 / Di Yao, Lixun Cai, Chen Bao -
Experimenting with concepts from modular product design and multi-objective optimization to benefit people living in poverty
Abstract Every discipline has its own specific knowledge that has been accumulated and refined over time. In the aerospace industry, for example, the domain knowledge of multidisciplinary optimization has grown and matured. The same has happened...
2016 / Nicholas S. Wasley, Patrick K. Lewis, Christopher A. Mattson, Hans J. Ottosson -
Energy Flow Analysis of China 2050 Pathways Energy Calculator with Special Emphasis on Transportation
Abstract Energy optimisation and CO2 emission reduction cannot be achieved without a holistic analysis of transportation. This research performs a critical analysis of the China 2050 Pathways Calculator with emphasis on its ability to assess...
2016 / Steve-Wonder Amakpah, Gengyuan Liu, Yan Hao, Linyu Xu -
Ti-rich precipitate evolution in vanadium-based alloys during annealing above 400 °C
Abstract We have assessed the plate-like TiO precipitate evolution in V-4Ti and V-4Ti-4Cr alloys during isochronal annealing above 400 °C, by combining Vickers hardness, positron lifetime and coincidence Doppler broadening measurements. Our results...
2017 / A. Impagnatiello, T. Toyama, E. Jimenez-Melero -
Coupled Heat and Mass Transfer Analysis of an Adiabatic Dehumidifier – Unique Approach
Abstract Liquid desiccant dehumidifier is one of the most desirable systems for dehumidification of air when compared to conventional refrigeration system and solid desiccant based dehumidifier. In the present study, a finite difference model is...
2016 / B. Kiran Naik, Ankit Soni, Amit kumar, P. Muthukumar, C. Somayaji -
Simulating Microstructure Evolution of Ultrasonic Welding of Battery Tabs
Abstract Ultrasonic welding offers ability to weld thin layers of malleable metals at low temperature and low power consumption. During ultrasonic welding, intensive material interactions occur due to the severe plastic deformation (SPD) and...
2016 / Ninggang Shen, Avik Samanta, Hongtao Ding, Wayne W. Cai -
Organization2016 /
-
Fleet Disposition Modeling to Maximize Utilization of Battery Electric Vehicles in Companies with On-Site Energy Generation
Abstract Various intelligent fleet disposition algorithms can be used to allocate mobility requests to a fleet of electric vehicles. However, none of these incorporate the issue of on-site energy generation at the company running the mixed fleets....
2016 / Johannes Betz, Dominick Werner, Markus Lienkamp -
Geometric Analysis for Concurrent Process Optimization of AM
Abstract Build orientation and deposition direction are two important AM process parameters which are determined at the pre-processing stage of AM. Carefully determined build direction and deposition direction can significantly improve the process...
2016 / Nazmul Ahsan, Ahasan Habib, Bashir Khoda -
Influence of Stitching on Skin Stringer Debonding in Stiffened Composite Panels
Abstract A potential increase of the out-of plane structural efficiency of laminated composites may be obtained by using 3D reinforcements technologies. In this paper, a numerical study is presented focusing on the effects of a single reinforcement...
2016 / A. Riccio, P. Linde, A. Raimondo, A. Buompane, A. Sellitto -
902. Neural Retina Limits Delivery Non Viral Vectors to Retinal Pigment Epithelium2016 /
-
Sustainable Panels with Recycled Materials for Building Applications: Environmental and Acoustic Characterization
Abstract Sound absorption materials structure is generally based on porous synthetic media (rock wool, glass wool, polyurethane, polyester, ect.): they have expensive production processes, important energy consumptions, and high environmental...
2016 / Cinzia Buratti, Elisa Belloni, Elisa Lascaro, Giovanna Anna Lopez, Paola Ricciardi -
Need and Opportunities for a ‘Plan B’ in Rail Track Inspection Schedules
Abstract Track inspection is purposely performed to recover tracks from defects and damage and eliminate potential safety hazards. It is scheduled through an exhaustive process that usually integrates many disciplines such as optimization,...
2016 / Mohd Haniff Bin Osman, Sakdirat Kaewunruen, Anson Jack, Joseph Sussman