Materials engineering topic list of research papers
-
Structural Health Monitoring in Composites Based on Probabilistic Reconstruction Techniques
Abstract Structural Health Monitoring (SHM) based on guided waves (GWs) is responsive to damage occurrences allowing the assessment of composites integrity. However, online monitoring is quite complex due to a wide range of parameters affecting wave ...
2016 / V. Memmolo, F. Ricci, N.D. Boffa, L. Maio, E. Monaco -
Random Small Probability Sample Matrix Used in Compressed Sensing Imaging
Abstract This investigation aimed to one common key issue of the two imaging types, the sampling of the template configuration. A first selector framework that employs MATLAB to perform attractive features of the small probability matrices in random ...
2016 / M. Ye, G.W. Yan, H.N. Ye -
Sizing Curve for the Design of Thermal Stabilizer of a Diesel Engine Powered Trigeneration System
Abstract Integrating absorption chillers with diesel engine generators makes possible the use of its rejected energy for meeting cooling energy demand. The performance of such an absorption chiller is sensitive to the temperature at its desorber...
2016 / Mahesh. N. Shelar, Prasad Gaikwad, G.N. Kulkarni -
Heterogeneous grain-scale response in ferroic polycrystals under electric field2016 / John E. Daniels, Marta Majkut, Qingua Cao, Søren Schmidt, Jon Wright, et al.
-
The settling behavior of quartz using chitosan as flocculant
Abstract The settling behavior of quartz using chitosan as flocculant has been studied and the mechanism has been discussed. The sedimentation results show that pH has an influence on the settling behavior of quartz particles and the sedimentation...
2016 / Bo Feng, Jinxiu Peng, Xianwen Zhu, Wanfu Huang -
Amplification of Plasma at Different Initial Temperatures inside a Microhole by a Short Laser Pulse and the Effect on the Hole Sidewall
Abstract Microholes with diameters varying with the hole depth have promising applications in important applications, but their manufacturing is difficult when the diameter of the hole is very small and/or varies complicatedly with the depth. In the ...
2016 / Navid Dabir-Moghaddam, Sha Tao, Benxin Wu, Yung C. Shin -
Hydraulic Characterization of Solenoid-actuated Injectors for Diesel Engine Common Rail Systems
Abstract Injection systems represent key elements in modern diesel engines because of the fundamental role played in fuel spray formation and evolution during the combustion phase. For this reason, their design needs attention and continuous...
2016 / A. Ferrari, A. Mittica, F. Paolicelli, P. Pizzo -
TOKES studies of the thermal quench heat load reduction in mitigated ITER disruptions
Abstract Disruption mitigation by massive gas injection (MGI) of Ne gas has been simulated using the 3D TOKES code that includes the injectors of the Disruption Mitigation System (DMS) as it will be implemented in ITER. The simulations have been...
2016 / S. Pestchanyi, M. Lehnen, R.A. Pitts, G. Saibene -
On a Multi-Physics Modelling Framework for Thermo-elastic-plastic Materials Processing
Abstract The present study is devoted to the boundary value problem of thermoelastoplasticity. The new analytical solution of the problem of irregularly heating of the thermo-elastic-plastic hollow cylinder was constructed. The Ishlinsky-Ivlev's and ...
2016 / Evgeniy Dats, Evgenii Murashkin, Nikita Stadnik -
Influence of Burnishing Axial Interference on Hole Surface Quality in Deep Hole Drilling of Inconel 718
Abstract The critical components in the oilfield and aerospace industries are made of Inconel 718 alloy. Thus far, the precision of high aspect hole making operation in these has been the bottleneck. This article explores the usability of single lip ...
2016 / S. Malarvizhi, Akshay Chaudhari, Keng Soon Woon, A. Senthil Kumar, Mustafizur Rahman -
Kinetic Structures of Cyclic Knots and Links as further Development of Tensegrity Principle
Abstract The paper explores knots and links of resilient filaments and their connection with tensegrity structures. “Classical” tensegrity of compressed struts and stretched tendons derives from basic principle of woven structures and X modules,...
2016 / Dmitri Kozlov -
Modeling and Simulation Research on Power-split Hybrid Electric Vehicle
Abstract In this paper, a simulation model of power-split hybrid electric vehicle is established and a type of energy management strategy based on optimum-fuel-economy curve is proposed as well. The model contains blocks which can simulate the real...
2016 / Jianfei Cao, Jiankun Peng, Hongwen He -
Flexible Shaping Architectural Forms Using Reciprocal Structures
Abstract Systems based on reciprocity of structural components allows to combine them into various configurations, with the use of the same principle of combining. The paper concerns applications of reciprocal structures in twisted multistory...
2016 / Maciej Piekarski, Szymon Filipowski -
Behavior of Wooden Based Insulations at High Temperatures
Abstract Insulation materials may give a different contribution to the fire resistance of timber frame assemblies. At present, Eurocode 5 Part 1-2 [1] provides a model for fire design of the load bearing function of timber frame assemblies with...
2016 / Mattia Tiso, Alar Just, Katrin Nele Mäger -
Comparison of non-linear, linearized 2nd order and reduced to FOPDT models of CSTR using different tuning methods
Abstract Process modelling and design of controller based on the process model is an important step in the process control. In the present study three different mathematical models i.e. non-linear process model, linearized 2nd order model and first...
2016 / Munna Kumar, R.S. Singh -
Thermal Fatigue of Die-Casting Dies: An Overview2016 / Hassan A. Abdulhadi, S.N. Aqida, M. Ishak, G.R. Mohammed
-
Design for Verification
Abstract Increased competition in the aerospace market has placed additional demands on aerospace manufacturers to reduce costs, increase product flexibility and improve manufacturing efficiency. There is a knowledge gap within the sphere of digital ...
2016 / Andrew Francis, Paul Maropoulos, Glen Mullineux, Patrick Keogh -
Preparation and optimization of a molybdenum electrode for CIGS solar cells2016 / Feng Jingxue, Wu Zhao, Wang Wei, Yuan Ye, Zhuang Lin, et al.
-
Draft genome sequence of a human-associated isolate of Haloferax alexandrinus strain Arc-hr, an extremely halophilic archaea
Abstract We report the draft genome sequence of Haloferax alexandrinus strain Arc-hr (CSUR P798), isolated from the human gut of a 10-year-old Amazonian individual. Its 3 893 626 bp genome exhibits a 66.00% GC content. The genome of the strain...
2016 / S. Khelaifia, A. Caputo, F. Djossou, D. Raoult -
A comprehensive study on impurity behavior in LHD long pulse discharges
Abstract Impurity behavior is studied in a variety of LHD (Large Helical Device) long pulse discharges, i.e. standard hydrogen plasmas, super dense core plasmas, helium plasmas with ICH (Ion Cyclotron Frequency Heating), multi-species plasmas mixed...
2016 / Y. Nakamura, N. Tamura, M. Kobayashi, S. Yoshimura, C. Suzuki, et al.