Materials engineering topic list of research papers
-
Computer Simulation of Optimal Thickness of Polyurea Coating Using for Trenchless Renovation of Potable Water Pipes
Abstract The computer simulation of strength properties of two-layer pipe construction “old pipeline + protective coating” has been conducted for quick curing polyurea formulation – Scotchkote 169HB and Scotchkote 2400. The research objective was to ...
2016 / Vladimir Orlov -
Nonlinear Transient Response of Basalt/Nickel FGM Composite Plates under Blast Load
Abstract In this study, the nonlinear dynamic response of basalt/nickel FGM composite plates has been investigated under blast load. Homogenous Laminated Model (HLM) and Power-Law Model (PLM) are used to model the basalt/nickel FGM composite plates. ...
2016 / Süleyman Baştürk, Haydar Uyanık, Zafer Kazancı -
Assessment of Selected Interior Flooring Materials On Indoor Air Quality
Abstract Indoor air quality depends on many factors, such as temperature, humidity, odours or presence of pollutants. A lot of materials used in the buildings, either as structural materials or as furnishings, are mostly the indoor air pollution...
2016 / Ingrid Juhásová Šenitková, Michal Kraus -
Novel Molten Salts Media For Production of Functional Materials2016 / Olga Tkacheva, Alexander Redkin, Alexander Kataev, Alexey Rudenko, Alexander Dedyukhin, et al.
-
Experimental Study of a Compact Unglazed Solar Thermal Facade (STF) for Energy-efficient Buildings
Abstract This paper presents a real-time experimental measurement of a novel compact unglazed solar thermal facade (STF) system at outdoor environment in Shanghai, China for about a whole summer week. It demonstrates the daily average solar thermal...
2016 / Jingchun Shen, Xingxing Zhang, Tong Yang, Llewellyn Tang, Hiroyuki Shinohara, et al. -
Characterization of the Insoluble Sludge from the Dissolution of Irradiated Fast Breeder Reactor Fuel
Abstract Insoluble sludge is generated in the reprocessing of spent fuel. The sludge obtained from the dissolution of irradiated fuel from the “Joyo” experimental fast reactor was analyzed to evaluate its chemical form. The sludge was collected by...
2016 / Haruka Aihara, Yoichi Arai, Atsuhiro Shibata, Kazunori Nomura, Masayuki Takeuchi -
Distributed, Autonomous Control in Production of Jet Turbine Parts
Abstract An industrial prototype of a distributed, autonomous shop floor control system (HolMS) has been developed based on the PROSA reference architecture for holonic manufacturing systems. The HolMS system challenges the concept of visual control ...
2016 / Per Aage Nyen, Espen Polanscak, Olivier Roulet-Dubonnet, Morten Lind -
Microstructural Evolution and Mechanical Properties of Laser Processed Ti6Al4V Sheets
Abstract This paper reports on the evolved microstructure and the mechanical properties of laser beam formed Ti6Al4V sheets processed at different parameters. Effective control of the process parameters is essential in achieving the desired...
2016 / Stephen A. Akinlabi, Esther T. Akinlabi, Subha K. Kumpaty, Courtney Kodweis -
Distortion Prediction of a Dual-disc Part by Turning-induced Residual Stresses Mapping
Abstract Residual stresses induced by machining can significantly affect distortions of thin-walled components in aerospace industries. Since finite element cutting models for entire parts are time-consuming and redundant, in this paper, a method is ...
2016 / Liuqing Yang, Yuxin Sun, Chungang Zhuang, Zhenhua Xiong -
Moment-curvature Model for Steel Plate-concrete Composite Beams
Abstract The rapid development of composite structures has led to a new design concept of the steel plate-concrete composite beam in which a thin steel plate is attached to the reinforced concrete beam. The shear connection is established by the use ...
2016 / Dawid Kisała -
A Service-oriented Secure Infrastructure for Feature-based Data Exchange in Cloud-based Design and Manufacture
Abstract Under the impact of service-oriented architecture (SOA) and cloud computing, Cloud-Based Design and Manufacture (CBDM) has been a flexible and effective way for Collaborative Product Development (CPD). As a crucial issue in sharing CAD...
2016 / Yiqi Wu, Fazhi He, Yilin Chen -
A Maximum Power Point Tracking Technique Based on Ripple Correlation Control for Single Phase Photovoltaic System with Fuzzy Logic Controller
Abstract This paper proposes a novel maximum power point tracking (MPPT) technique by integrating ripple correlation control (RCC) with fuzzy logic controller (FLC) for single-phase, single-stage grid-connected photovoltaic (PV) systems. RCC is...
2016 / Ch. L.S. Srinivas, E.S. Sreeraj -
A roof model and its application in solid backfilling mining
Abstract Through changing the axial load on backfilling material compaction test to reflect different overlying strata pressure on backfilling material, the stress-strain relations in the compaction process of backfilling material under the...
2016 / Feng Ju, Peng Huang, Shuai Guo, Meng Xiao, Lixin Lan -
Development of Thermomechanical Model for the Analysis of Effects of Friction and Cutting Speed on Temperature Distribution around AISI 316L During Orthogonal Machining
Abstract In metal cutting,severe deformation takes place in the vicinity of the cutting edge of the high strain-rate and an increase in temperature is observed. Deformation behaviour of the work material in the primary and secondary zones is highly...
2016 / Oluseyi O. Ajayi, Abatan Abiola, Mercy Ogbonnaya, Agarana Michael -
Allowable Span Length of Submerged Pipes under the Effect of Hydrodynamic Forces
Abstract This study aims to calculate the maximum spanning lengths of different size High Density Polyethylene pipes (HDPE) at the intermediate zone of coastal environments. In order to do so, Reynolds number less than 3.5×105 and Keulegan Carpenter ...
2016 / Pakhshan Ahmadian, Umut Türker -
A new structure-property connection in the skeletal elements of the marine sponge Tethya aurantia that guards against buckling instability2017 / Michael A. Monn, Haneesh Kesari
-
Tensile Strength of PHBV/Natural Rubber Latex Mixtures2015 / Sarunya Promkotra, Tawiwan Kangsadan
-
Ultra-soft magnetic properties and correlated phase analysis by 57Fe Mössbauer spectroscopy of Fe74Cu0.8Nb2.7Si15.5B7 alloy2016 / S. Manjura Hoque, S. I. Liba, A. Anirban, Shamima Choudhury, Shireen Akhter
-
Aluminum Matrix Composites for Industrial Use: Advances and Trends
Abstract Composites material, plastics and ceramics have been the dominant emerging materials in many industries over the last decade. The motive behind the use of metal matrix composite components in the automotive, agriculture and mining sectors...
2016 / S.T. Mavhungu, E.T. Akinlabi, M.A. Onitiri, F.M. Varachia -
The Effect of the Illumination Intensity on the Performance of Si Multijunction based Integrated Photoelectrochemical water Splitting Devices
Abstract We present a study of the effect of illumination intensity on the performance of a photovoltaic-biased electrochemical (PV-EC) device for solar hydrogen production based on a triple junction thin film silicon solar cell. The influence of...
2016 / V. Smirnov, K. Welter, J.-P. Becker, F. Urbain, W. Jaegermann, et al.