Materials engineering topic list of research papers
-
Getting Fired Material with Vitreous Binder Using Frame Technology
Abstract There is no chance to expand kiln materials properties and scope as such materials do not have any coarse aggregate in their composition. In this regard, we decided to develop a fired material with coarse aggregate. It is only possible to...
2016 / Vladimir Erofeev, Sergey Korotaev, Alexey Bulgakov, Ilia Tretiakov, Alexandr Rodin -
Responsible Research and Innovation in Construction
Abstract The issue of ethics and responsibility is gaining attention among the creators of scientific policy, funding agencies and society at large. Responsible research is defined as research that aligns both the process and the outcomes with the...
2016 / Žiga Turk -
Residual Strength Evaluation after Impact Tests in Extreme Conditions on CFRP Laminates
Abstract Compression after impact tests were performed using a new apparatus, designed and realized by University of Naples “Federico II”, within the Solid Mechanics Program financed by ONR, that allow a more simple functioning and more reliable...
2016 / V. Lopresto, A. Langella, I. Papa -
Optical study of gamma irradiated sodium metaphosphate glasses containing divalent metal oxide MO (ZnO or CdO)
Abstract Sodium metaphosphate glasses containing divalent metal oxide, ZnO or CdO with composition 50 P2O5 – (50−x) Na2O – x MO (ZnO, or CdO) where x=0, 10, 20 (mol%) were prepared by conventional melt method. UV/visible spectroscopy and FTIR...
2016 / E. Nabhan, W.M. Abd-Allah, F.M. Ezz-El-Din -
436. Dual pH Response Nanoparticles for Gene Delivery2016 /
-
Investigation of the Aluminum Nitride Formation During the Aluminum Nanopowder Combustion in Air
Abstract The phase formation sequences, intermediate and final products of aluminum nanopowder combustion are studied. The experiments were performed in the Budker Institute of Nuclear Physics, Siberian Branch of the Russian Academy of Sciences,...
2016 / Andrei V. Mostovshchikov, Alexander P. Ilyin, Alexander N. Shmakov, Konstantin V. Zolotarev -
On the Behavior of the Overcut and Stuck Effects During Pipejacking
Abstract No-Dig constructions in the city might encounter of various difficulties. And the difficulties or obstacles, which might cause schedule delays and damage to the pipes. Among the others, the conditions of overcut and stuck could be the most...
2016 / Keh-Jian Shou, Chih-Ying Hsieh -
Investigating the Impact of Tool Velocity on the Process Conditions in Incremental Forming of Titanium Sheets
Abstract This paper deals with a study focused on the single point incremental forming (SPIF) of titanium Grade 2 sheets. The direct impact of the sliding velocity of the forming tool on mechanical and thermal process loads was experimentally...
2016 / E.H. Uheida, G.A. Oosthuizen, D. Dimitrov -
An Improved Biclustering Algorithm and Its Application to Gene Expression Spectrum Analysis
Cheng and Church algorithm is an important approach in biclustering algorithms. In this paper, the process of the extended space in the second stage of Cheng and Church algorithm is improved and the selections of two important parameters are discussed. The results ...
2016 / Hua Qu, Liu-Pu Wang, Yan-Chun Liang, Chun-Guo Wu -
Defining Next-Generation Additive Manufacturing Applications for the Ministry of Defence (MoD)
Abstract “Additive Manufacturing” (AM) is an emerging, highly promising and disruptive technology which is catching the attention of the Defence sector due to the versatility it is offering. Through the combination of design freedom, technology...
2016 / Alessandro Busachi, John Erkoyuncu, Paul Colegrove, Richard Drake, Chris Watts, et al. -
Ultrasonically Assisted Cutting of Bio-tissues in Microtomy
Abstract Modern-day histology of bio-tissues for supporting stratified medicine diagnoses requires high-precision cutting to ensure high quality extremely thin specimens used in analysis. Additionally, the cutting quality is significantly affected...
2016 / Dong Wang, Anish Roy, Vadim V. Silberschmidt -
In vitro degradation and surface bioactivity of iron-matrix composites containing silicate-based bioceramic
Abstract Iron-matrix composites with calcium silicate (CS) bioceramic as the reinforcing phase were fabricated through powder metallurgy processes. The microstructures, mechanical properties, apatite deposition and biodegradation behavior of the...
2016 / Sanguo Wang, Yachen Xu, Jie Zhou, Haiyan Li, Jiang Chang, et al. -
Rotating Heat Transfer Measurements on Realistic Multi-pass Geometry
Abstract In this contribution, a novel rig was used to assess the heat transfer coefficients on a full internal multi pass cooling scheme. Transient liquid crystal technique was used for the measurement of the heat transfer...
2016 / Fabio Pagnacco, Luca Furlani, Alessandro Armellini, Luca Casarsa, Anthony Davis -
On the interest of microgravity experimentation for studying convective effects during the directional solidification of metal alloys
Abstract Under terrestrial conditions, solidification processes are often affected by gravity effects, which can significantly influence the final characteristics of the grown solid. The low-gravity environment of space offers a unique and efficient ...
2016 / Henri Nguyen-Thi, Guillaume Reinhart, Bernard Billia -
Dynamic compressive response of wrapped carbon fibre composite corrugated cores
Abstract The experimental study on the compressive response of the carbon fibre composite sandwich structures with corrugated cores is reported. The corrugated core was manufactured from unidirectional carbon fibre pre-impregnated lamina wrapped...
2016 / Tao Liu, Paul Turner -
Some micromechanical models of elastoplastic behaviors of porous geomaterials
Abstract Some micromechanics-based constitutive models are presented in this study for porous geomaterials. These micro-macro mechanical models focus on the effect of porosity and the inclusions on the macroscopic elastoplastic behaviors of porous...
2016 / W.Q. Shen, J.F. Shao -
Structural, morphological and magnetic properties of Al3+ substituted Ni0.25Cu0.20Zn0.55AlxFe2−xO4 ferrites synthesized by solid state reaction route
Abstract Ni-Cu-Zn ferrite materials have been extensively used in electronic materials because of their outstanding properties at high frequencies. This work investigates the impact of Al substitution on the structure, morphology and magnetic...
2016 / K.R. Rahman, F.-U.-Z. Chowdhury, M.N.I. Khan -
CFD Analysis of Nanorefrigerant through Adiabatic Capillary Tube of Vapour Compression Refrigeration System
Abstract Over time attempts have been made to understand the flow characteristics of refrigerants through capillary tubes as well as to seek more thermally efficient working fluids for refrigeration systems. This study investigated the flow of...
2016 / Oluseyi O. Ajayi, Dorothy E. Ibia, Mercy Ogbonnaya, Ameh Attabo, Agarana Michael -
An Efficient Solution to the Mixed Shop Scheduling Problem Using a Modified Genetic Algorithm
Abstract The mixed job shop scheduling problem is one in which some jobs have fixed machine orders and other jobs may be processed in arbitrary orders. In past literature, optimal solutions have been proposed based on adaptations of classical...
2016 / V. Nguyen, H.P. Bao -
Summary of the 6th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells
Abstract The 6th Metallization Workshop took place in Constance, Germany on 2 and 3 May 2016. At the workshop the latest progress in the understanding and application of metallization and interconnection was presented. Screen printed metallization...
2016 / Guy Beaucarne, Gunnar Schubert, Loïc Tous, Jaap Hoornstra