Materials engineering topic list of research papers
-
Obtaining Hetero- substituted Semiconductor Materials (ZnSe)x (CdS)1-x and their Crystallochemical and Structural Properties
Abstract The substitutional solid solutions (ZnSe)x (CdS)1-x of various compositions have been obtained using the isometrical diffusion method of binary compounds (ZnSe and CdS), modernized by taking into consideration their physicochemical...
2016 / I.A. Kirovskaya, E.V. Mironova, O.V. Ushakov, A.A. Deeva, A.V. Yurieva -
Application of Module Drivers Creating Modular Manufacturing Equipment Enabling Changeability
Abstract The changeability of manufacturing systems can be of great importance for manufacturing companies to react rapidly and cost-effectively to market and product changes. Creating the basis for increasing the reuse and reusability of the...
2016 / Mads Bejlegaard, Thomas Ditlev Brunoe, Kjeld Nielsen -
IKDSIFT: An Improved Keypoint Detection Algorithm Based-on SIFT Approach for Non-uniform Illumination
Abstract In this paper, we propose an improved keypoint detection algorithm of object-based recognition for non-uniform illumination, called IKDSIFT, which is implemented using the SIFT approach, morphological operations, Top-Hat filtering and...
2016 / Krittachai Boonsivanon, Anupap Meesomboon -
Monte Carlo Simulation to Predict Fracture Initiation in Mild Steel
Abstract The brittle fracture occurs suddenly and can cause the fatal accident, so it needs to be prevented. The brittle fracture has been studied by a lot of researchers, but the quantitative relationship between fracture toughness and...
2016 / Yoshiki Nemoto, Kazuki Shibanuma, Katsuyuki Suzuki, Shuji Aihara -
Analysis of the Material Behavior of Cemented Carbides (WC-Co) in Grinding by Single Grain Cutting Tests
Abstract When grinding multi-phase, brittle materials like cemented carbides consisting of a soft binder matrix (Co) and hard grains (WC), a transition from brittle to ductile regime grinding has been proven scientifically. The phase fractions and...
2016 / F. Klocke, C. Wirtz, S. Mueller, P. Mattfeld -
Voyage from fiction to reality: organs-on-chips in the Service of Science and Medicine2016 / Marina Macías Silva
-
Gigacycle fatigue: non-local and scaling aspects of damage localization, crack initiation and propagation
Abstract Progress in instrumentation in fatigue studies in the range 107 - 109 cycles revealed new paradigm: crack growth is not a main portion of life and initiation mechanisms are of primary importance with internal fatigue crack origin....
2016 / Oleg Naimark, Thierry Palin-Luc -
Hydrolysis of PET by Combining Direct Microwave Heating with High Pressure
Abstract The direct hydrolysis of waste poly(ethylene terephthalate) (PET) was carried out in a high pressure reactor under microwave heating condition. Microwave irradiation enhanced the diffusion of water into the PET matrix by the effect of the...
2016 / Kazutoshi Ikenaga, Takahiro Inoue, Katsuki Kusakabe -
Halar® High Clarity ECTFE Film – An Highly Transparent Film for New Buildings Structures
Abstract To meet architects and engineers seeking of high quality lightweight materials for Building and Construction applications (such as canopies, facades, domes, and umbrellas,..), within Solvay Specialty Polymers, a Global Business Unit fully...
2016 / Paolo Toniolo, Serena Carella -
Probabilistic Calculation of Tolerances of the Dimension Chain Based on the Floyd-warshall Algorithm
Abstract The tolerance analysis of the technological processes in mechanical engineering is a time-consuming task requiring automation. Development of an algorithm to identify individual dimension chains makes this task even more difficult. Based...
2016 / A.V. Muholzoev, V.B. Masyagin -
Turbo-refrigerators Using for Cooling the Cryotherapeutic Units
Abstract The Paper is devoted to rationale for using refrigerators, working on air refrigeration machine cycle, for cryostating low-temperature space of cryotherapeutic complexes. The low energy efficiency of cryotherapeutic complexes restricts its...
2016 / A.Y. Baranov, T.A. Malysheva -
Analysis of the Distribution of Fracture Toughness Values measured with 1T C(T) Specimens at Loading Rates higher than dK/dt=105 MPa√m s-1
Abstract In a research project investigating the correlation of dynamic crack initiation and crack arrest, funded by the German government, tests at -20 °C on specimens of 22 NiMoCr 3 7 steel (A 508 Cl.2) were performed with different specimen...
2016 / Uwe Mayer -
Modeling of Floods and Flood Control Water Reservoirs for Evaluation of Inundation Da Nang Province of Vietnam
Abstract Monsoon rains cause floods in Viet Nam almost every year, particularly in the city of Da Nang, where the stormy rainfall has brought to almost 600mm within one day then inundation was catastrophic. Therefore there is an urgent need to...
2016 / Le Hong Nhung, A.V. Perminov, I.E. Kozyr -
Examination of Microstructure of Solidification Product Containing Hazardous Sludge
Abstract The tests involved with the microstructure evaluation must be also added to the processes which significantly support the evaluation of long-term durability of solidification product (SP). Monitoring the microstructure by analyses such as...
2016 / Jakub Hodul, Rostislav Drochytka -
Gap-bridging During Quasi-simultaneous Laser Transmission Welding
Abstract Tightness is often the main requirement for quasi-simultaneous laser transmission welds. However, remaining gaps cannot be detected by the used set-path monitoring. By using a pyrometer in combination with a 3D-scanner, weld seam...
2016 / Anton Schmailzl, Stefan Hierl, Michael Schmidt -
Residual Stress Evaluation of a High Performance Machined Pre-formed Ti6Al4V Part
Abstract Near net-shape technologies are increasingly used to enhance resource efficiency in high performance machining for various applications, including aerospace. In this paper the effect of a pre-formed based manufacturing route on the residual ...
2016 / D.M. Dimitrov, R.F. Laubscher, A. Sterzing, P.J.T. Conradie, G.A. Oosthuizen, et al. -
Graphene-zinc oxide (G-ZnO) nanocomposite for electrochemical supercapacitor applications
Abstract Graphene-ZnO nanocomposites (G-ZnO) were prepared by a facile solvothermal approach. Well, crystalline ZnO nanoparticles with size in the range of 30–70 nm are uniformly deposited on the graphene sheets, as evidenced by different...
2016 / Murugan Saranya, Rajendran Ramachandran, Fei Wang -
Cohesive and XFEM evaluation of adhesive failure for dissimilar single-lap joints
Abstract Cohesive Zone Modelling (CZM) and eXtended Finite Element Modelling (XFEM) available in Abaqus® are used together to simulate the behaviour and strength of dissimilar single-lap adhesively bonded joints. A distinct CZM model is also used....
2016 / Florin Adrian Stuparu, Dragos Alexandru Apostol, Dan Mihai Constantinescu, Catalin Radu Picu, Marin Sandu, et al. -
Evaluation of Precast Pre-post-tensioned Concrete Bridge Beams with the Use of GPR Method
Abstract Precast pre-post-tensioned concrete beams are commonly used in transport engineering. Significant number of bridge structures is being built with the use of precast girders due to their advantages such as quick construction process,...
2016 / Łukasz Sławski, Łukasz Kosno, Grzegorz Świt -
Sustainable SWM in Developing Countries Focusing on Faster Growing Economies, India and China
Abstract The waste management is a major issue in most of the developing countries in the globe. India and China are two faster growing economies who also have similar problems to handle huge amount of municipal solid waste (MSW). Moreover, with the ...
2016 / Sadhan Kumar Ghosh