Materials engineering topic list of research papers
-
Fatigue Crack Growth Under Variable Amplitude Loading Through XFEM
Abstract Predicting fatigue crack growth (FCG) rate and path under variable amplitude loading (VAL) is a crucial issue in damage tolerant design commonly used in aerospace industry. The aim of the current study is to predict FCG life under VAL...
2016 / Haydar Dirik, Tuncay Yalçinkaya -
Physical Realization of a Supervised Learning System Built with Organic Memristive Synapses2016 / Yu-Pu Lin, Christopher H. Bennett, Théo Cabaret, Damir Vodenicarevic, Djaafar Chabi, et al.
-
Mode I fracture toughness of fibre-reinforced concrete by means of a modified version of the two-parameter model
Abstract The present paper proposes a method to calculate Mode I plane-strain fracture toughness of concrete, by taking into account the possible crack deflection (kinked crack), even in the case of a far-field Mode I loading. As a matter of fact,...
2016 / Sabrina Vantadori, Andrea Carpinteri, Giovanni Fortese, Camilla Ronchei, Daniela Scorza -
Exploring Potential Users of Patents for Technology Transfer: Utilizing Patent Citation Data
Abstract The purpose of this study is to examine whether potential users of technology can be identified by patent citation analysis. Previous research relied on patent's keywords, and as a consequence it was difficult to implement in practice where ...
2016 / Ilyong Ji, Hyungjoo Lim, Tae-Young Park -
X-ray diffraction study on inelastic deformation behavior of Ni-base single crystal superalloy
Abstract Damage assessment method of gas turbine hot-gas-path components such as blade and nozzle was required to evaluate remaining life of these components; especially, the method for estimating whether inelastic deformation occurred or not is...
2016 / Yasuhiro Mukai -
Studying the Resonance Processes in the Surface Layers of Friction Pairs with Lubrication by Means of Molecular Dynamics
Abstract The article investigates the resonances of diffusion processes using molecular dynamics method (MD) for heat-resistant steel carbonitriding. For this purpose, three types of resonances processes are used, different in terms of influence of...
2016 / P.I. Malenko, K.J. Relmasira, A.Yu. Leonov -
Analytical Prediction Model for Indoor Particle Deposition onto Ocular Surface
Abstract This paper was based on the definition of particle deposition velocity. By analysis the deposition mechanisms of particle in concentration boundary layer, the paper deduced an analytical expression of differential equation about...
2016 / Zhang Yang, Li Nianping, Wang Chen, Zeng Jing -
Peculiarities of shear deformation of gouge-filled faults
Abstract Presented are the results of laboratory investigations of the evolution of parameters of a discontinuity during shear. It is shown that conditions of the discontinuity change continuously, and regularities of these changes are controlled by ...
2016 / Alexey A. Ostapchuk, Dmitry V. Pavlov -
Wavelength and Pulsewidth Dependences of Laser Processing of CFRP
Abstract As the use of CFRP material becomes widespread in various industries, achieving high-speed cutting with less pulse energy and minimal thermal damage is one of the important issues for laser-based processing. Among the various parameters in...
2016 / M. Fujita, H. Ohkawa, T. Somekawa, M. Otsuka, Y. Maeda, et al. -
Dissolution behavior of lithium compounds in ethanol
Abstract In order to exchange the components which received irradiation damage during the operation at the International Fusion Materials Irradiation Facility, the adhered lithium, which is partially converted to lithium compounds such as lithium...
2016 / Tomohiro Furukawa, Yasushi Hirakawa, Hiroo Kondo, Takuji Kanemura -
Flat Dilatometer (DMT). Some Recent Advances
Abstract This paper illustrates recent developments in the DMT interpretation on two topics (1) DMT In Partially Draining Saturated Silts (“Niche Silts”) (2) Estimating by DMT the liquefaction resistance CRR in clean sand. As to the “Niche Silts”...
2016 / Diego Marchetti, Silvano Marchetti -
Mechanical properties of Aluminum-Copper(p) composite metallic materials
Abstract Composite metallic materials (CMMs) are prepared by dispersing copper particulates in aluminum matrix using stir-cast technique. Their behavior is compared with the alloy having similar composition. The effect of particulate composition is...
2016 / Siddabathula Madhusudan, Mohammed Moulana Mohiuddin Sarcar, Narsipalli Bhargava Rama Mohan Rao -
Analysis of Morphology Characters on Fuse Residuum of Knife Switch in Fire Ground
Abstract In this paper, the integrated experimental system of material evidence for fire trace was used to make fuse residuum by simulating overload and short circuit of electric circuit, bad connection and fire. The scanning electron microscope can ...
2016 / Jing-jing Wang -
Biocompatible poly(vinyl alcohol) nanoparticle-based binary blends for oil spill control
Abstract In the current study, biocompatible and biodegradable blends based on poly(vinyl alcohol) nanoparticles – PVAn mixed with either chitosan (Ch) or starch (St) – were prepared and investigated as nanoabsorbents for oil elimination from...
2016 / Rasha Refaat Fouad, Hind Abdullah Aljohani, Kamel Rizq Shoueir -
OPTIHUBS - Multimodal Hub Process Optimization by Means of Micro Simulation
Abstract The development of multimodal hubs is a sensitive task due to numerous parallel occurring processes and external dependencies. There are already isolated solutions available that mostly suffer from a holistic approach. Based on the results...
2016 / Daniel Elias, Birgit Nadler, Friedrich Nadler, Georg Hauger -
Full-Scale-Model Tests of Reinforced Structural Elements
Abstract Modern construction projects represent complex engineering structures that vary in purpose, materials, height, the regulatory period of service, purpose and features of operation. Oftentimes, there is a need for reconstruction of old...
2016 / I.A. Stetsenko, D.N. Shurygin, I.S. Grushko -
Deformation Properties of Tailor Welded Blank Made of Dual Phase Steels2016 / Alexander Schrek, Pavol Švec, Veronika Gajdošová
-
Advanced intermediate temperature sodium–nickel chloride batteries with ultra-high energy density2016 / Guosheng Li, Xiaochuan Lu, Jin Y. Kim, Kerry D. Meinhardt, Hee Jung Chang, et al.
-
Stoichiometric Equilibrium Model Based Assessment of Hydrogen Generation through Biomass Gasification
Abstract Hydrogen produced from renewable energy sources is clean and sustainable. Biomass gasification has a significant role in the context of hydrogen generation from biomass. Assessment of the performance of biomass gasification process...
2016 / Joel George, P. Arun, C. Muraleedharan -
Geometric modeling of midi-fullerenes growth from C24 to C48
Abstract Axonometric projections together with corresponding graphs for fullerenes are constructed in the range from 24 to 48. The growth of fullerenes is studied on the basis of the mechanism, according to which a carbon dimer embeds in a hexagon...
2016 / Alexander I. Melker, Maria A. Krupina