Materials engineering topic list of research papers
-
Determining the microstructure and properties of magnesium aluminum composite panels by hot rolling and annealing
Abstract The researchers made magnesium aluminum composite panels by asymmetric metal packaging and studied rolling temperature, holding time, and high temperature heat treatment, such as short time and low temperatures over long periods of time...
2016 / Zilong Zhao, Qiang Gao, Junfeng Hou, Ziwei Sun, Fei Chen -
Development of Urban Inundation Reduction Model by Data-driven Estimation and Hydraulic Analysis
Abstract This study presents that a development of the data-driven model for the real-time operation of drainage pump station and integrated unban flood inundation model with one-dimensional (1D) sewer system model and two-dimensional (2D) overland...
2016 / Kun-Yeun Han, Ah-Long Son, Kwang-Ik Son, Byunghyun Kim, Jun-Hyung Park -
A Peridynamic Model for Ductile Fracture of Moderately Thick Plates
Abstract This paper presents an effective modeling technique for propagation of mode I cracks in ductile materials using Peridynamics Implemented Finite Element Analysis (PDIFEA) in ABAQUS. Peridynamics is a nonlocal theory which removes the...
2016 / Uğur Yolum, Ahmet Taştan, Mehmet A. Güler -
Optimization of Cycle Time in an Assembly Line Balancing Problem
Abstract Assembly line is a sequential work flow production systems which are still typical in the mass production of standard products. In mixed model assembly line system, it can produce the production sequentially by mixing more than one product...
2016 / A.S. Vishnu Raj, Jeeno Mathew, Peter Jose, Gishnu Sivan -
Preface2016 / Andrey A. Radionov
-
Motion Deblurring for Space-Based Imaging on Sandroid CubeSats Using Improved Genetic Algorithm
Abstract NanoSats have become viable alternative to larger spacecraft that focuses on providing the end user with access to space and similar functionality to mainstream missions. However, motion blur ruins the images captured under the situation...
2016 / Xiaoqiang Wu, Fengge Wu, Junsuo Zhao -
Predicting the Impact of Climate Change on Tidal Zone Fishes Using SVM Approach
Abstract Climate change is the most important topic discussed among countries due to the damage it made to the environment. The impact of the climate change influences the people and marine fisheries directly and indirectly. The implication of...
2016 / R. Jeberson Retna Raj, T. Sasipraba, M. Vasudev, Sanjay Gupta, Md. Rizwan, et al. -
The Use of Confocal Laser Scanning Microscopy for the 3D Quantitative Characterization of Fracture Surfaces and Cleavage Facets.
Abstract Brittle and ductile fracture surfaces of annealed low-carbon steel specimens having different grain sizes were investigated by means of confocal laser scanning microscopy (CLSM) in conjunction with conventional scanning electron microscopy...
2016 / E. Merson, A.V. Kudrya, V.A. Trachenko, D. Merson, V. Danilov, et al. -
Effect of Group Composition of the Vacuum Distillate from Heavy Kazakhstan and West Siberian Oil on the Yield of Light Fractions During the Catalytic Cracking
Abstract This paper presents the research results aimed at the assessment of the impact of the group composition of Kazakhstan and West Siberian heavy vacuum distillate on the yield and composition of the catalytic cracking products. The laboratory...
2016 / G.Y. Nazarova, E.N. Ivashkina, E.D. Ivanchina, V.I. Stebeneva, G.Zh. Seytenova -
Environmental Performance Improvement in Gasoline Engines with External Mixture Formation
Abstract The results of experimental and theoretical research that indicate the improvement of the environmental performance of the petrol vehicle of class M1 are shown. The fuel and air channels of engine are equipped with permanent magnets....
2016 / V.L. Polyacko, V.S. Morozova, V.S. Goun -
Investigation of mechanical properties and proton irradiation behaviors of SA-738 Gr.B steel used as reactor containment
Abstract The proton irradiation behaviors of two kinds of SA-738Gr.B steels prepared by different heat treatment used as AP1000 reactor containment were investigated by transmission electron microscopy and positron annihilation lifetime spectrum...
2016 / Yongzheng Ma, Guang Ran, Nanjun Chen, Penghui Lei, Qiang Shen -
Method of Composite Materials Characteristics Forecasting
Abstract An analytical method for predicting characteristics of building composite materials is proposed. It is based on the properties of their components and on the following key assumptions: characteristics of a composite on the contact surfaces...
2016 / G.B. Verzhbovskiy -
Sub-1100 nm lasing from post-growth intermixed InAs/GaAs quantum-dot lasers2015 / H.H. Alhashim, M.Z.M. Khan, B.S. Ooi, T.K. Ng, M.A. Majid
-
Analysis and control of the compaction force in the composite prepreg tape winding process for rocket motor nozzles
Abstract In the process of composite prepreg tape winding, the compaction force could influence the quality of winding products. According to the analysis and experiments, during the winding process of a rocket motor nozzle aft exit cone with a...
2016 / Xiaodong He, Yaoyao Shi, Chao Kang, Tao Yu -
Results of the Experimental Evaluation of the Effect of Surface Roughness and the Load on the Mechano-chemical Processes at the Boundary Sliding Friction
Abstract The article presents experimental data on the influence of the roughness and the load on the mechano-chemical processes at the boundary sliding friction. It was found that the use of electrometric method for assessment of the...
2016 / B.I. Kowalski, E.G. Kravcova, N.N. Lysyannikova -
Double Printing nPERT Cells with Narrow Contact Layers
Abstract Screen printing of two different paste layers on top of each other is used for reducing the detrimental effect of the p+ contact to nPERT cells. For the contacting layer, a line width between 15μm and 30μm is used. In a second print step,...
2016 / Jan Lossen, Dominik Rudolph, Lejo J. Koduvelikulathu, Ricardo Carvalho, Mark P. Rossetto, et al. -
Recognition of achievement – priorities and process2016 / Lynnette D. Madsen, Rita R. Colwell
-
Mixed Mode (I+II) Fatigue Crack Growth of Long Term Operating Bridge Steel
Abstract The structural components from structures such as bridge members are subjected to a long operating period of time. The problem of fatigue cracks is more interesting in existing bridge structures with existing cracks. In case of the...
2016 / G. Lesiuk, P. Kucharski, J.A.F.O. Correia, A.M.P. De Jesus, C. Rebelo, et al. -
Method to Optimise the Position of Rumble Strips on the Hard Shoulder to Avoid Run-off-road Accidents and Unnecessary Noise Pollution
Abstract Around one third of road deaths in Europe are the result of run-off-road accidents. The major causes are considered to be fatigue, distraction and inattention. Rumble strips are one of the appropriate available measures that help prevent...
2016 / E. Tomasch, H. Hoschopf, W. Sinz, B. Strnad -
The electronic and structural properties in Ca2TiMnO6 double perovskite: The first principle study
Abstract We studied the crystal structure of double perovskite Ca2TiMnO6 using ab initio density functional theory (DFT) calculations. We used the atomic positions given by the X-ray diffraction (XRD) data, in order to create a primitive lattice...
2016 / G. Tse, D. Yu