Materials engineering topic list of research papers
-
Normal Probability and Heuristics based Path Planning and Navigation System for Mapped Roads
Abstract In a hybrid road network with multiple paths to same location having prior geographical knowledge, successful navigation for mobile robots is one of the main challenges. Path planning is one of the most important issues in the navigation...
2016 / A.L. Amith, Amrinder Singh, H.N. Harsha, N.R. Prasad, Lakshmi Shrinivasan -
Revealing the morphological architecture of a shape memory polyurethane by simulation2016 / Jinlian Hu, Cuili Zhang, Fenglong Ji, Xun Li, Jianping Han, et al.
-
Oxidation mechanism of T91 steel in liquid lead-bismuth eutectic: with consideration of internal oxidation2016 / Zhongfei Ye, Pei Wang, Hong Dong, Dianzhong Li, Yutuo Zhang, et al.
-
Non Linearity of the Ball/Rubber Impact in Table Tennis: Experiments and Modeling
Abstract Along with comfort, the speed is a key metric used to qualify the performance of a table tennis racket. The restitution coefficient which corresponds to the ratio between the velocities of the ball right before and after normally impacting...
2016 / Renaud G. Rinaldi, Lionel Manin, Clément Bonnard, Adeline Drillon, Hugo Lourenco, et al. -
A magnetic persistent current switch at milliKelvin temperatures
Abstract We report the development of a magnetically driven Persistent Current Switch operated in a dilution refrigerator. We show that it can be safely used to charge a 60mH coil with 0.5A at 11mK, which heats up the dilution refrigerator to...
2016 / Bob van Waarde, Olaf Benningshof, Tjerk Oosterkamp -
Evaluation of Elder and Historical Bridges
Abstract Bridge structures are designed on lifetime, which is given in standards and relevant time of design. The design lifetime of bridge structures was 80 years according to expired Slovak standard STN. New design lifetime of the newly designed...
2016 / Peter Koteš, Josef Vičan, Ružica Nikolič -
On the material properties of shell plate formed by line heating2016 / Hyung Kyun Lim, Joo-Sung Lee
-
The Evolution of Cities: “Brains” or “Parasites” of Sustainable Production and Consumption Processes in China
Abstract In the last two decades, remarkable progress in the promotion and implementation in China has occurred and generated a huge change of land use, energy and other resources demand, as well as environmental problems. It is therefore of...
2016 / Gengyuan Liu, Steve-Wonder Amakpah, Zhifeng Yang, Bin Chen, Yan Hao, et al. -
Analysis of Landslide Dam Failure Caused by Overtopping
Abstract Landslide dam failure is one of the most serious natural hazards worldwide. These days, the adverse impact caused by landslide dam has increased significantly due to the effect of climate change and overpopulation. This study presents the...
2016 / Xuan Khanh Do, Minseok Kim, H.P. Thao Nguyen, Kwansue Jung -
Development of Scan Strategies for Controlled 3D Laser Forming of Sheet Metal Components
Abstract Laser forming offers the industrial promise of controlled iterative shaping of metallic and non-metallic components. In order to fulfil this promise in a manufacturing environment the process must have a high degree of control, be...
2016 / H. Gao, G. Sheikholeslami, G. Dearden, S.P. Edwardson -
Residual Stresses and Surface Integrity of Ti-alloys During Finish Turning – Guidelines for Compressive Residual Stresses
Abstract Residual stresses (RS) induced by machining control a component's resistance to progressive failure. It is crucial to identify favorable cutting conditions that promote fatigue-inhibiting compressive RS while preserving other aspects of...
2016 / E. Abboud, H. Attia, B. Shi, A. Damir, V. Thomson, et al. -
Dislocation network with pair-coupling structure in {111} γ/γ′ interface of Ni-based single crystal superalloy2016 / Yi Ru, Shusuo Li, Jian Zhou, Yanling Pei, Hui Wang, et al.
-
Stability Analysis of Multiple LEDs Dimming Circuits: An Interaction between an LC Input Filter and Two Buck Converters
Abstract This paper proposes an average modeling of LED dimming circuits controlled by an indirect sliding mode technique. The circuit and control parameters that affect a multiple LED dimming system's stability are studied. The dimming system...
2016 / Apinya Siangsanoh, Viboon Chunkag, Matheepot Phattanasak, Roghayeh Gavagsaz-Ghoachani -
Distribution System Nodal Prices Determination for Realistic ZIP and Seasonal Loads: An Optimal Power Flow Approach
Abstract The impact of deregulation in power system has changed the electricity pricing scheme where the prices are governed by the rules of market operation. The prices must take into account the effect of load and must be based on the change in...
2016 / Karimulla Polisetti, Ashwani Kumar -
Gelation process visualized by aggregation-induced emission fluorogens2016 / Zhengke Wang, Jingyi Nie, Wei Qin, Qiaoling Hu, Ben Zhong Tang
-
A new method to extend the stress response of triboluminescent crystals by using hydrogels
Abstract Polyacrylamide hydrogel entrapment of EuD4TEA or Cu(NCS)(py)2(PPh3) radically extends the emission time of the triboluminescent (TL) crystalline particles by a factor of 103, optimized when matching the hydrophilic/hydrophobic...
2016 / Anıl İncel, Subrayal M. Reddy, Mustafa M. Demir -
Surface Formation Study Using a 3-D Explicit Finite Element Model of Machining of Gray Cast Iron
Abstract Gray cast iron is the material of choice for machine tool structural components. However, since cast iron is a multiphase, anisotropic material it is difficult to machine to a high quality surface finish. To gain insight into the surface...
2016 / Kyle Odum, Masakazu Soshi -
Nature of gallium focused ion beam induced phase transformation in 316L austenitic stainless steel
Abstract The microstructural evolution and chemistry of the ferrite phase (α), which transforms from the parent austenite phase (γ) of 316L stainless steel during gallium (Ga) ion beam implantation in Focused Ion Beam (FIB) instrument was...
2016 / R. Prasath Babu, S. Irukuvarghula, A. Harte, M. Preuss -
Prediction of Residual Stress and Part Distortion in Selective Laser Melting
Abstract Selective laser melting (SLM) is widely used to make functional metal parts. The high-temperature process will produce large tensile residual stress (RS) which leads to part distortion and poor product performance. Traditional modeling...
2016 / C. Li, J.F. Liu, Y.B. Guo -
The Valve is a Shutoff for the Passive Protection Systems of Pipelines
Abstract In this paperwe investigated the protective valve designed for automatic protection of equipment and pipelines from inadmissible or in-process changes in the parameters or direction of the fluid flow and to shut off the flow without...
2016 / I.R. Chinyaev, A.V. Fominykh, E.A. Ilinykh