Materials engineering topic list of research papers
-
New Two-Dimensional Polynomial Failure Criteria for Composite Materials2014 / Shi Yang Zhao, Pu Xue
-
Comparison of Two Powder Processing Techniques on the Properties of Cu-NbC Composites2014 / B. D. Long, R. Othman, Hussain Zuhailawati, M. Umemoto
-
The Influence of Nickel and Tin Additives on the Microstructural and Mechanical Properties of Al-Zn-Mg-Cu Alloys2014 / Haider T. Naeem, Kahtan S. Mohammed, Khairel R. Ahmad, Azmi Rahmat
-
Nanocatalysts for Hydrogen Generation from Ammonia Borane and Hydrazine Borane2014 / Zhang-Hui Lu, Qilu Yao, Zhujun Zhang, Yuwen Yang, Xiangshu Chen
-
Anisotropy in plastic deformation of extruded magnesium alloy sheet during tensile straining at high temperature2013 / David E Cipoletti, Allan F Bower, Paul E Krajewski
-
Workflow for integrating mesoscale heterogeneities in materials structure with process simulation of titanium alloys2014 / Ayman A Salem, Joshua B Shaffer, Daniel P Satko, S Semiatin, Surya R Kalidindi
-
Carbon based materials for electronic bio-sensing
Bio-sensing represents one of the most attractive applications of carbon material based electronic devices; nevertheless, the complete integration of bioactive transducing elements still represents a major challenge, particularly in terms of preserving biological...
2011 / Maria D. Angione, Rosa Pilolli, Serafina Cotrone, Maria Magliulo, Antonia Mallardi, et al. -
Semiconductors for organic transistors
Organic molecules/polymers with a π-conjugated (hetero)aromatic backbone are capable of transporting charge and interact efficiently with light. Therefore, these systems can act as semiconductors in opto-electronic devices similar to inorganic materials. However,...
2007 / Antonio Facchetti -
Prospects for rare earth doped GaN lasers on Si
The recent surge of interest and research activity in Si-based lasers underscores the potential benefits that full capability in photonics could bring to the Si world. We highlight some of the recent advances in lasing based on emission from rare earth (RE)...
2007 / Andrew J. Steckl, Jeong Ho Park, John M. Zavada -
Cuprate high-Tc superconductors
In solid-state physics two different paradigms are typically applied. The first is a local picture, in which one visualizes the quantum states of electrons in atomic orbitals or at impurity atoms in real space (r-space). The second is the momentum or reciprocal...
2008 / Kyle M. Shen, J.C. Seamus Davis -
Active Vibration Control of Beam Using Electro-magnetic Constrained Layer Damping
Abstract This paper investigates vibration control of beam through electro-magnetic constrained layer damping (EMCLD) which consists of electromagnet layer, permanent magnet layer and viscoelastic damping layer. When the coil of the electromagnet is ...
2008 / Niu Hongpan, Zhang Yahong, Zhang Xinong, Xie Shilin -
Microscopic Phase-field Simulation of Effects of Re-ageing Temperature on Precipitation of Ni-Al-Cr Alloys
Abstract This article, by means of the ternary microscopic phase-field model, investigates the effects of re-ageing temperature on the precipitation of Ni75Al10Cr15 alloy with the help of atomic pictures, order parameters, particle density, averaged ...
2009 / Zhang Jixiang, Chen Zheng, Lai Qingbo, Zhao Yan, Wang Yongxin -
A High-speed Nature Laminar Flow Airfoil and Its Experimental Study in Wind Tunnel with Nonintrusive Measurement Technique
Abstract This article deals with an experimental study on the aerodynamic characteristics of a low-drag high-speed nature laminar flow (NLF) airfoil for business airplanes in the TST27 wind tunnel at Delft University of Technology, the Netherlands....
2009 / Zhu Jun, Gao Zhenghong, Zhan Hao, Bai Junqiang -
A New Scheme and Microstructural Model for 3D Full 5-directional Braided Composites
Abstract Three-dimensional(3D) braided composites are a kind of advanced ones and are used in the aeronautical and astronautical fields more widely. The advantages, usages, shortages and disadvantages of 3D braided composites are analyzed, and the...
2010 / Zhang Fan, Liu Zhenguo, Wu Zhe, Tao Guoquan -
Damage Simulation for 3D Braided Composites by Homogenization Method
Abstract In order to study the failure patterns and strength of 3D braided composites from the microscopic view, the damage propagation under tensile loading steps in three kinds of unit cells is simulated. The homogenization formula of micro-stress ...
2011 / Dong Jiwei, Feng Miaolin -
Experimental Investigation of the Influence of Edge Morphology in High Power Fiber Laser Welding
Abstract The objective of the research is to investigate and compare the quality of welded samples of two low alloyed steels, S355 and St 3 with various edge preparations in butt joint configuration. Welding was performed with high power fiber...
2012 / Mikhail Sokolov, Antti Salminen -
Picosecond Laser Machining of Metallic and Polymer Substrates for Fluidic Driven Self-Alignment
Abstract Fluidic self-alignment of micro-components relies on creating a receptor site that is able to confine a liquid droplet. When a micro-component is brought in contact with the droplet, capillary forces move the component to its final...
2012 / G.R.B.E. Römer, D. Arnaldo Del Cerro, R. Pohl, B. Chang, V. Liimatainen, et al. -
Raman-IR vibrational and XRD characterization of ancient and modern mineralogy from volcanic eruption in Tenerife Island: Implication for Mars
Abstract A detailed vibrational Raman-IR spectroscopic and diffractional analyses have been performed on basalts from two locations from Tenerife Island: (1) the Arenas Negras volcano which belongs to the historical eruption not showing visible...
2015 / E.A. Lalla, G. Lopez-Reyes, A. Sansano, A. Sanz-Arranz, J. Martínez-Frías, et al. -
Statistical Tolerance Analysis of a Mechanism with Gaps based on System Reliability Methods
Abstract One of the aim of statistical tolerance analysis is to evaluate a predicted quality level in the design stage. A method consists in computing the defect probability P expressed in parts per million (ppm). It represents the probability that...
2013 / P. Beaucaire, N. Gayton, E. Duc, J.-Y. Dantan -
Large Magnetocaloric Effect and Magnetic Properties in ErCoAl
Abstract Magnetic properties and magnetocaloric effects of the intermetallic compound ErCoAl, crystallizing in the hexagonal MgZn2-type structure, have been investigated. This compound shows second-order ferromagnetic transition with Curie...
2015 / Dexin Li, Yoshiya Homma, Fuminori Honda, Tomoo Yamamura, Dai Aoki