Materials engineering topic list of research papers
-
Environment, Energy and Economic Analysis of Wind Power Generation System Installation with Input-output Table
Abstract Input-output (I-O) analysis, which is an economic analysis approach using an industrial commodity table, is used to analyze inventories of embodied energy and environmental burdens of a product. The study aims to analyze the effect of...
2015 / Shin Nagashima, Yohji Uchiyama, Keiichi Okajima -
Evaluation of selective laser sintering processes by optical coherence tomography
Abstract Selective laser sintering (SLS) enables the fast, flexible and cost-efficient production of parts directly from 3D CAD data. Unlike more established machine tools, there is a marked lack of process monitoring and feedback control of key...
2015 / Guangying Guan, Matthias Hirsch, Zeng Hai Lu, David T.D. Childs, Stephen J. Matcher, et al. -
Study of Plastic Heterogeneity in a Low Carbon Steel Sheet by EBSD
Abstract The aim of this study is to analyze the development of plastic heterogeneity in low carbon steel sheets when they are subjected to different loading paths, typical of forming process operations. Nakajima type tests are performed and...
2015 / Javier Signorelli, Andrea Fourty, Analía Roatta, Claudio Schwindt, Fernando Schlosser, et al. -
Material Modelling and Springback Analysis for Multi-stage Rotary Draw Bending of Thin-walled Tube Using Homogeneous Anisotropic Hardening Model
Abstract The aim of this paper is to compare several hardening models and to show their relevance for the prediction of springback and deformation of an asymmetric aluminium alloy tube in multi-stage rotary draw bending process. A three-dimensional...
2014 / Juan Liao, Xin Xue, Frederic Barlat, Jose Gracio -
Surface Temperature Analysis for Infrared Active-illuminated Vehicle
Abstract Since different temperature between object surface and surround environment is the fundamental of active infrared object detection, surface temperature for an active-illuminated vehicle is analyzed in this paper. The calculation models for...
2011 / Hua Yang, Xing Yang -
Education for environment care: contribution through human ecology
Abstract Think about a relationship in which the most important is the harmony between man and environment, and not a continuous confrontation, is like thinking about a human ecology. This kind of relation would be possible if people and their...
2011 / Ciro Hernando Parra Moreno, Ivan Dario Moreno Acero, Nelson Hernando Puentes Rodriguez -
Deformation Behaviour on the Simulation of Liquefaction in Particle Geomaterials
Abstract Liquefaction has recently been shown to occur in constitutive models at a critical value for the hardening modulus. Thus, the nearness of a soil element to liquefying at a given instant can be determined by finding the difference between...
2015 / L.C. Huang, B.B. Dai, Y. Cheng -
Fabrication of MEMS Platform for Sensors Applications by Laser Micro Engraving
Abstract The target of this work is the demonstration of advanced approaches able to provide rapid prototyping by using laser technology ceramic MEMS platforms for chemical sensor operating under harsh environmental conditions and, on the other...
2015 / Konstantin Oblov, Anastasia Ivanova, Sergey Soloviev, Nikolay Samotaev, Alexey Vasiliev, et al. -
Two-beam Laser Brazing of Thin Sheet Steel for Automotive Industry Using Cu-base Filler Material
Abstract This work shows the potential of two-beam laser brazing for joining both Zn-coated steel and 22MnB5. Brazing of Zn-coated steel sheets using Cu-Si filler wire is already state of the art in car manufacturing. New press-hardened steels like...
2014 / C. Mittelstädt, T. Seefeld, D. Reitemeyer, F. Vollertsen -
Green Factory Supported by Advanced Carbon-based Manufacturing
Abstract The Siemens green cycle vision for green production and green raw materials opens up new manufacturing models and new product markets to provide an answer for the world's hunger for materials. The materials have a promising future for...
2015 / Dominik Rohrmus, Volkmar Döricht, Nils Weinert -
Options of Advanced Simulations of Crank Presses Loading
Abstract This paper deals with the possibilities of advanced FEM simulations used for the understanding of process of loading of crank presses. Concrete example presents transient (time-dependent) dynamic simulation loading. Load input parameters of ...
2015 / Martin Zahálka, Jiří Staněk -
Co Oxidation Properties Of Selective Dissoluted Metallic Glass Composites2015 / S.-Y. Kim, M.-H. Lee, T.-S. Kim, B.-S. Kim
-
Corrosion of Zr-1Nb and Zr-2.5Nb in 0.1 M LiOH at 343°C
Abstract The corrosion behavior of Zr-2.5%Nb pressure tube material and Zr-1%Nb aged at 560°C for 4 months has been studied in 0.1M lithium hydroxide solution at 343°C. The results were compared with those obtained in steam at 400°C. In the latter,...
2015 / S. Müller, L. Lanzani -
Finite Element Analysis of All Composite CNG Cylinders
Abstract It is the need of time to ensure the safe operation of compressed natural gas (CNG) cylinders under adverse conditions; the extremities should be predicted under which these cylinders continue to operate without failing. A comprehensive...
2015 / Mayank Nirbhay, Sagar Juneja, Anurag Dixit, R.K. Misra, Satpal Sharma -
Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory2015 / Rajesh Khanna, Anish Kumar, Mohinder Pal Garg, Ajit Singh, Neeraj Sharma
-
Experimental Investigation of Tool Geometry on Mechanical Properties of Friction Stir Welding of AA 2014 Aluminium Alloy
Abstract The AA 2014-T6 is widely used in the air craft structure and truck body. The alloy cannot be welded by gas welding techniques due to poor weldability. Welding of this Al alloy by Arc & Resistance welding require special techniques & ...
2014 / S. Ugender, A. Kumar, A. Somi Reddy -
Influence of CaCO3, Al2O3, and TiO2 microfillers on physico-mechanical properties of Luffa cylindrica/polyester composites
Abstract The development of natural fibre reinforced polymer composites has gained popularity in many applications due to their environment friendly characteristics over the synthetic fibre based polymer composites. This paper describes the...
2015 / Vinay Kumar Patel, Anil Dhanola -
CaMnO3-δ Made from Low Cost Material Examined as Oxygen Carrier in Chemical-looping Combustion
Abstract Carbon Capture and Storage is a promising method to limit the increasing amount of greenhouse gases in the atmosphere. In this method high purity carbon dioxide is captured at large emission sources, e. g. fossil fuelled power plants. The...
2014 / Peter Hallberg, Magnus Rydén, Tobias Mattisson, Anders Lyngfelt -
Conductivity of the PGT Synthesized by the High Energy Ball Milling (HEBM)2013 / S. K. S. Parashar, M. Ghoranneviss, A. Salar Elahi
-
The Research of Acupuncture Effective Biomolecules: Retrospect and Prospect2013 / Yu Wang, Lei-Miao Yin, Yu-Dong Xu, Yan-Yan Lui, Jun Ran, et al.