Materials engineering topic list of research papers
-
Diffusive hydrogen inter-cage migration in hydrogen and hydrogen-tetrahydrofuran clathrate hydrates2013 / Huayu Cao, Niall J. English, J. M. D. MacElroy
-
Easy to use technology compresses laser pulses for research2015 / Laurie Donaldson
-
Functional Properties of Shape Memory Bimetal Plate
Abstract The recoverable strain in shape memory bimetallic composite plates consisting of a Ti50Ni50 alloy functional layer and a Ti49.3Ni50.7 elastic bias layer is studied. It is shown that such plate pre-deformed by bending shows reversible shape...
2015 / S. Belyaev, M. Evard, I. Lomakin, N. Resnina, V. Rubanik, et al. -
Additive Manufacturing of Titanium Alloy for Aircraft Components
Abstract Selective Laser melting (SLM) is an additive manufacturing technology that uses laser as a power source to sinter powdered metals to produce solid structures. The application of SLM permits engineers to develop and implement components with ...
2015 / Eckart Uhlmann, Robert Kersting, Tiago Borsoi Klein, Marcio Fernando Cruz, Anderson Vicente Borille -
Fracture toughness testing of nanocrystalline alumina and fused quartz using chevron-notched microbeams
Abstract We show that chevron-notched samples offer an attractive approach to the measurement of fracture toughness in micron-scale samples of brittle materials and use the method to characterize quartz and nanocrystalline alumina. Focused ion beam...
2015 / M.G. Mueller, V. Pejchal, G. Žagar, A. Singh, M. Cantoni, et al. -
Impact of biaxial compressive strain on the heterostructures of paraelectrics KTaO3 and SrTiO32015 / Yi Yang, Chen-Sheng Lin, Wen-Dan Cheng
-
Synthesis and superconductivity of (Ag)x/CuTl-1223 composites
Abstract Series of (Ag) x /(Cu0.5Tl0.5Ba2Ca2Cu3O10-δ) {(Ag) x /CuTl-1223} nano-superconductor composites were synthesized with different concentrations (i.e....
2015 / Abdul Jabbar, Irfan Qasim, M. Mumtaz, K. Nadeem -
Using Artificial Neural Networks for Prediction of Global Solar Radiation in Tehran Considering Particulate Matter Air Pollution
Abstract Long term measurements of the amount of solar energy at ground level are not easily possible in many locations. Therefore, using empirical relations and recently applying Artificial Neural Networks (ANN) are common means for prediction of...
2015 / Masoud Vakili, Saeed-Reza Sabbagh-Yazdi, Koosha Kalhor, Soheila Khosrojerdi -
The Effect of Short Metallic and Polymeric Fiber on the Fracture Behavior of Cement Mortar
Abstract A study has been made concerning the influence of short randomly oriented steel and polypropylene fibers on the fracture of cement mortar. With regard to the steel fibers, different fiber volume fractions were considered and the results...
2014 / Eduardo Campello, Marcos V. Pereira, Fathi Darwish -
On the Implication of Hydrogen on Inter-granular Fracture
Abstract The intergranular fracture promoted by hydrogen ingress in the material depends on densities and organizations of defects near grain boundaries. Particularly, we illustrate first the relation between the grain boundary character and the...
2014 / A. Oudriss, J. Bouhattate, C. Savall, J. Creus, X. Feaugas, et al. -
Surface Roughness Modelling in Face Milling
Abstract The ability to plan the quality of surfaces is very important in manufacturing due to the fulfillment of requirements for parts machined by different methods. A method and a modelling procedure are introduced in the paper based on the...
2015 / Csaba Felhő, Bernhard Karpuschewski, János Kundrák -
Influence of acetone on nanostructure and electrochemical properties of interfacial synthesized polyaniline nanofibers
Abstract The growth of polyaniline (PANI) nanofibers through interfacial polymerization can be well controlled by adding a small amount of acetone in the water/chloroform system. It was found that the polymerization rate became slower in the...
2015 / Jianyun Zhao, Zongyi Qin, Tao Li, Zhuozhan Li, Zhe Zhou, et al. -
Distributed Photovoltaic Architecture for HVDC-bus Feeding with a Simple Evaluation of Optimal Tracking
Abstract This contribution describes, compares, and analyses two structures and their operating modes dedicated to renewable energy production from photovoltaic (PV) sources. Between the two different technical approaches, photovoltaic sources...
2015 / H. Allouache, A. Zegaoui, M. Arab, B. Belmadani, M. Aillerie -
Mechanical characterisation of a fibre reinforced oxide/oxide ceramic matrix composite
Abstract Monotonic tension, fatigue and creep experiments were conducted on an oxide/oxide ceramic matrix composite over the range of temperature 20–1200°C. The role of continuous fibre reinforcement, differential thermal expansion, stress...
2015 / D.T. Di Salvo, E.E. Sackett, R.E. Johnston, D. Thompson, P. Andrews, et al. -
Performance evaluation of multi-input–single-output (MISO) production process using transfer function and fuzzy logic: Case study of a brewery
Abstract This work reports an improved and novel new method of evaluating the performance of multi input single output (MISO) processes, as exemplified by a brewery. This new method involves the combination of transfer function modeling and fuzzy...
2015 / Chidozie Chukwuemeka Nwobi-Okoye, Stanley Okiy, Anthony Clement Igboanugo -
Characteristic analysis on the physical properties of nanostructured Mg-doped CdO thin films—Doping concentration effect
Abstract Highly conductive and transparent magnesium-doped cadmium oxide (CdO:Mg) thin films have been deposited on suitably cleaned glass substrates maintained at 375°C by spray pyrolysis technique using perfume atomizer. The magnesium content in...
2015 / K. Usharani, A.R. Balu, V.S. Nagarethinam, M. Suganya -
The Formation of Magnetic Flux Domain in the Type-II Superconductors with Ferromagnetic Defects
Abstract The magnetization of 2D high-temperature superconductors with internal ferromagnetic defects under application of transport current and external dc magnetic field was studied by using Monte Carlo method. The current-voltage characteristics...
2015 / V.A. Kashurnikov, A.N. Maksimova, I.A. Rudnev, D.S. Odintsov -
Design Progress of the DEMO Divertor Locking System According to IPADeP Methodology
Abstract The Iterative and Participative Axiomatic Design Process (IPADeP) deals with the early conceptual design stage of complex mechanical assemblies. It provides a systematic approach based on the theory of Axiomatic Product Development...
2015 / Domenico Marzullo, Giuseppe Di Gironimo, Antonio Lanzotti, Giuseppe Mazzone, Rocco Mozzillo -
Investigations on the Viscoelastic Performance of Pressure Sensitive Adhesives in Drug-in-Adhesive Type Transdermal Films2014 / Hans-Michael Wolff, Irsan, Kalliopi Dodou
-
Transient MHD free Convection Flow and Heat Transfer of Nanofluid Past an Impulsively Started Vertical Porous Plate in the Presence of Viscous Dissipation
Abstract A mathematical model is developed for the nanofluid flow and heat transfer due to the impulsive motion of an infinite vertical porous plate in its own plane in the presence of a magnetic field and viscous dissipation. The governing...
2015 / V. Rajesh, M.P. Mallesh, O. Anwar Bég