Materials engineering topic list of research papers
-
Performance Analysis of a Ge-on-Si Resonant Cavity Enhaced Schottky Photodetetor for Optical Communication at 1.55μ m
Abstract In this paper, performance of a Ge-on-Si Resonant-Cavity-Enhanced (RCE) Schottky Photodetector at 1.55_m has been investigated considering the effects of carrier confinements at the Si/Ge heterointerface. The transit-time delay and loss of...
2012 / H.S. Dutta, N.R. Das -
Ternary Cement Composites with Metakaolin Sand and Calcined Clayey Diatomite
Abstract The advancement of cement composites with different pozzolana types represents needful domain in civil engineering. Utility properties of such composites are closely approaching the level of standard quality. The raw materials – kaolin sand ...
2013 / Ľudovít Krajči, Marta Kuliffayová, Ivan Janotka -
Space-Time Adaptive Processing for GPS Anti-Jamming Receiver
Abstract A space-time adaptive processing (STAP) algorithm which can reject interference in spatial domain as well as temporal domain has been widely used in GPS anti-jamming system. According to the characteristic which GPS signal power is far less ...
2012 / Hongwei Zhao, Baowang Lian, Juan Feng -
MEMS-Based Terahertz Detectors
Abstract A MEMS based novel THz detector structure is designed and realized by micro fabrication. The detector is then characterized to extract its mechanical performance. Operating in 1-5 THz band, the detector has a pixel size of 200μm × 200μm....
2015 / H. Bilgin, A.D. Yalcinkaya, H. Torun -
Assessing Wear Performance of Two High-carbon Hadfield Steels Through Field Tests in the Mining Industry
Abstract Hadfield steels are widely used in the production of liners for rock crushing applications due to their good wear resistance and high toughness. Because of the high replacement frequency and cost of these liners, improvements in the...
2015 / Rodrigo Lencina, Claudia Caletti, Katya Brunelli, Rodolfo Micone -
The effects of strain rate and temperature on commercial acrylic artist paints aged one year to decades2015 / Eric W. S. Hagan, Maria N. Charalambides, Christina R. T. Young, Thomas J. S. Learner
-
Size dependency and potential field influence on deriving mechanical properties of carbon nanotubes using molecular dynamics
Abstract A thorough understanding on the mechanical properties of carbon nanotube (CNT) is essential in extending the advanced applications of CNT based systems. However, conducting experiments to estimate mechanical properties at this scale is...
2015 / K.G.S. Dilrukshi, M.A.N. Dewapriya, U.G.A. Puswewala -
Innovative Method of Material Treatmentby Microwave Energy
Abstract In the submitted paper, the attention was devoted to the application of microwave energy in the treatment of various raw materials. The influence of microwave heating on the melting of andesite rocks is described. It was confirmed that the...
2015 / Ingrid Znamenáčková, Silvia Dolinská, Milota Kováčová, Michal Lovás, Vladimír Čablík, et al. -
Room Temperature Gas Multisensor System Based on a Novel Polymer Nanocomposite Material
Abstract The applicability of multisensor system based on a novel polymer nanocomposite material with parylene matrix including metal and/or semiconductive nanoparticles for the detection of low concentrations of ammonia gas, nitrogen dioxide, and...
2014 / Mikhail Yablokov, Alexey Vasiliev, Andrey Varfolomeev, Sergey Zavyalov -
Double Layer Interval Graph Model: The Universal Tool for Data Driven Market Analysis and Forecasting
Abstract This scientific work is dedicated to the development, improvement and application of double layer interval weighted graphs (DLIG) for non-stationary time series forecasting. This model appears to be the universal and easy-to-use tool for...
2015 / Nikolay V. Markov, Andrey V. Dmitriev, Svetlana V. Maltseva -
Synthesis and Characterization of Mechanical Alloyed Mg-Ni-Ca and Mg-Cu-Ca Amorphous Alloys
Abstract Magnesium and its alloys are widely recommended for automotive, electronics and biomedical industries due to their strength to weight ratio. The mechanically alloyed magnesium with Ni, Cu and Ca alloys exhibits superior properties. In this...
2015 / Thirumurugan Muthiah, Claudio Aguilar, Danny Guzman, S. Kumaran -
Design and Fabrication of Automatic Material Handling System for Engraving Machine
Abstract This paper aims at the automation of feeding, clamping and retrieval process to carry out the manual job. The limiting parameter was the size of the table. Based on the constraints the components are designed, assembled, tested and...
2014 / S.K. Harisha, Mahantesh Biradar, B. Vitthal Uppar, R.S. Kulkarni -
Fatigue Crack Propagation Micromechanisms in a Cu-Zn-Al Alloy with Pseudoelastic Effect
Abstract Cu-Zn-Al alloys are characterized by good shape memory properties due to a bcc disordered structure, stable at high temperature, called β-phase. These grades are able to change their microstructure by means of a reversible transition from...
2014 / V. Di Cocco, F. Iacoviello, S. Natali, V. Volpe, F. Maiolino -
Thermomechanical analysis of a Flow Channel Insert based on a SiC-sandwich material concept
Abstract The Dual Coolant Led Lithium (DCLL) blanket is one of the concepts being investigated as candidate for DEMO, due to the high thermal efficiency provided by the flowing PbLi self-cooled breeder at ≈700°C in the high temperature design. Key...
2016 / Carlota Soto, José M. Martínez-Esnaola, Carmen García-Rosales -
Nanocrystalline titania for smart windows2014 / Laurie Winkless
-
The Use of Carbon Nanotubes to Reinforce 45S5 Bioglass-Based Scaffolds for Tissue Engineering Applications2013 / R. Touri, F. Moztarzadeh, Z. Sadeghian, D. Bizari, M. Tahriri, et al.
-
Pricing Scheme of Ocean Carrier for Inbound Container Storage for Assistance of Container Supply Chain Finance2014 / Mingzhu Yu, Xin Tian, Lean Yu
-
Multiphoton polymerization
The inherent optical nonlinearity of multiphoton absorption allows such absorption to be localized in regions of high light intensity. This means that photochemical or photophysical transformations can be restricted to occur within the focal volume of a laser beam ...
2007 / Linjie Li, John T. Fourkas -
Perspectives on EM metamaterials
Electromagnetic (EM) metamaterials have become a field of intense research activities. This paper presents a critical perspective of the field, with emphasis on fundamental concepts and practical applications. Metamaterials are explained in the general context of...
2009 / Christophe Caloz -
First Principles Predictions of Van Der Waals Bonded Inorganic Crystal Structures: Test Case, HgCl2
Abstract We study the crystals structure and stability of four possible polymorphs of HgCl2 using first principles density functional theory. Mercury (II) halides are a unique class of materials which, depending on the halide species, form in a wide ...
2015 / Valentino R. Cooper, Kelling J. Donald