Materials engineering topic list of research papers
-
Experimental Research on Combustion Characteristics of Air-supported Membrane Materials
Abstract Based on the combustion experiment of combustion characteristics of air-supported membrane materials the fire dynamic phenomenon at different heights was studied, and the combustion critical temperature of the membrane materials was...
2013 / Yuan-yuan Zhang, Guo-qing Zhu, Hui Yang -
[P1.030] Preparation of nano-emulsions using SPG Membrane Emulsification -Application to Vitamin E Encapsulation2012 / A. Laouini, H. Fessi, C. Charcosset
-
High Efficient and Stable Solid Solar Cell: Based on FeS2 Nanocrystals and P3HT: PCBM
Abstract Nanocrystals(NCs)/polymer solid solar cells have the advantages of low-cost, simple process and flexible manufacturing. FeS2 NCs is a kind of semiconductor with optical absorption in visible and near-infrared area, match well with the solar ...
2015 / Lingli Luo, Weiling Luan, Binxia Yuan, Chengxi Zhang, Lin Jin -
MHD Natural Convection in a Rectangular Cavity having Internal Energy Sources with Non-Uniformly Heated Bottom Wall
Abstract The present study deals with steady natural convection flow in a rectangular cavity containing internally heated and electrically conducting fluid. The bottom wall is non-uniformly heated while the upper wall of the cavity is well...
2013 / M. Obayedullah, M.M.K. Chowdhury -
Functional properties of bimetal composite of “stainless steel–TiNi alloy” produced by explosion welding
Abstract The functional properties of “TiNi–stainless steel” bimetal composite produced by explosion welding were studied. The influence of the ratio of the TiNi layer thickness to the total thickness of the sample as well as the influence of...
2011 / S. Belyaev, V. Rubanik, N. Resnina, V. Rubanik (jr), O. Rubanik, et al. -
Coupling liquids acoustic velocity effects on elastic metallic bioglass properties
Abstract The effect of surface acoustic wave, SAW, velocities of coupling liquids on acoustical properties of several bulk metallic glasses, BMG, has been investigated using simulation program based on acoustic microscopy. Thus, we determined...
2010 / W. Metiri, F. Hadjoub, A. Doghmane, Z. Hadjoub -
Preface2010 / Hans Riesen, Matthew Sellars, Neil Manson
-
Ultrafast Scan Techniques for 3D-μm Structuring of Metal Surfaces with high repetitive ps-laser pulses
Abstract Metals and other materials can be machined with surpassing quality and highest flexibility with high power ultrafast lasers. In this study a slab based MOPA ps-laser system with fluencies of up to 30J/cm2 and pulse repetition rates in the...
2011 / Stephan Bruening, Guido Hennig, Stephan Eifel, Arnold Gillner -
Study on the electronic structure and optical properties of the environmentally friendly semiconductor Ca3Si4
Abstract In this paper, electronic structure and optical properties of the bulk of the new-type environment friendly semiconductor material Ca3Si4 are investigated in detail by using first principles pseudo-potential calculations based on the...
2011 / Ran Gao, Quan Xie -
Final Analysis: Palladium in Temporary and Permanently Implantable Medical Devices2012 / Brian Woodward
-
Phenomenological Model to Re-proportion the Ambient Cured Geopolymer Compressed Blocks2013 / Radhakrishna, Tirupati Venu Madhava, G. S. Manjunath, K. Venugopal
-
Solar Photovoltaic Industry in Hohhot: Technical Roadmap and Development Strategy
Abstract In recent years, low carbon technology has got great attention all over the world, because of the limited reserves of fossil fuels and increasingly severe environmental pollution. Meanwhile, with the development of global low carbon, the...
2011 / LI Changqing, LI Dandan -
Failure behaviour wellbore cement in the presence of water and supercritical CO2
Abstract The presence of numerous abandoned wells in depleted oil and gas reservoirs might provide leakage paths thus compromising the integrity of long-term CO2 storage. However little data is available on the effect of CO2-saturated solutions on...
2009 / Emilia Liteanu, Christopher J. Spiers, Colin J. Peach -
CO2 reduction potential of coal-to-liquids (CTL) plants
Abstract Coal-to-liquids (CTL) processes generate synthetic liquid fuels like gasoline and diesel fuel from coal. One main concern of coal liquids, however, is the large emissions of carbon dioxide (CO2) from the CTL process. These emissions can be...
2009 / Hari Chandan Mantripragada, Edward S. Rubina -
Development of membrane reactor technology for power production with pre-combustion CO2 capture
Abstract Hydrogen membrane reactors are an advanced technology for pre-combustion CO2 capture at gas fired power stations. Developments in the field of membrane manufacturing, bench scale testing, module modeling and technoeconomic evaluations are...
2011 / Jan Wilco Dijkstra, Johannis A.Z. Pieterse, Hui Li, Jurriaan Boon, Yvonne C. van Delft, et al. -
Damage Accumulation Due to Sequential Loading Effect
Abstract Damage accumulation is a well known concept in multiaxial fatigue but the achievement of damage quantification and associate it to fatigue life estimation is still a big challenge. The aim of this work is to study the damage accumulation...
2011 / L. Reis, V. Anes, B. Li, M. de Freitas -
Influence of voids on the flexural resistance of the NCF/RTM6 composites
Abstract A major difficulty to achieve maximum weight savings in the manufacture of composite structural components, is the tendency of these materials have the formation of voids and cracks in the interior and surface components. In aeronautical...
2011 / Sergio Roberto Montoro, Marcos Yutaka Shiino, Tessie Gouvea da Cruz, Maria Odila Hilario Cioffi, Herman Jacobus Cornelis Woorwald -
Binary gas sensor based on acoustic cavity resonator
Abstract The paper presents a novel gas sensor which can be used for analysing two-component gas mixtures even under harsh measuring conditions, such as high temperature φ < ...
2010 / L. Zipser, A. Peter -
Collapse of a coal loadout structure from fatigue caused by wind-induced vibration
Abstract This paper describes the collapse of a large coal loadout structure after one year of operation. The incident occurred on a calm day and without warning. The conclusion of the consultants for the designers and constructors was that there...
2011 / Iain Le May -
Laser welding of Al-Si coated hot stamping steel
Abstract Advanced high strength steel (AHSS) is being increasingly used in automotive industries for weight reduction purposes. Hot stamping steel, which is a boron alloyed steel, has a strength greater than 1500MPa after hot forming and successive...
2011 / C. Kim, M.J. Kang, Y.D. Park