Mechanical engineering topic list of research papers
-
Complete Coverage Path Planning in an Unknown Underwater Environment Based on D-S Data Fusion Real-Time Map Building2012 / Mingzhong Yan, Daqi Zhu, Simon X. Yang
-
Modeling and Simulation to Muscle Strength Training of Lower Limbs Rehabilitation Robots2015 / K.-Y. Wang, C.-B. Di, X.-Q. Tang, S. Zhang
-
Thermo-Economic Analysis of Combined Cycle MED-TVC Desalination System
Abstract In the present work, thermo-economic model of a superstructure combined cogeneration power plant is studied. Engineering Equation Solver “EES” code is used to study the enhancement of the thermal performance, the environmental impact and...
2015 / A.S. Hanafi, G.M. Mostafa, A. Fathy, A. Waheed -
Enabling Lean Design Through Computer Aided Synthesis: The Injection Moulding Cooling Case
Abstract This paper explores the application of Computer Aided Synthesis (CAS) to support the implementation of Set-Based Concurrent Engineering (SBCE) and Just In Time Decision Making (JIT-DM), which are considered as two of the cornerstones of the ...
2015 / Juan M. Jauregui Becker, Wessel W. Wits -
A neural network driving curve generation method for the heavy-haul train2016 / Y. Huang, L. Tan, L. Chen, T. Tang
-
Solution and Analysis of Chatter Stability for End Milling in the Time-domain
Abstract In this paper, the instantaneous undeformed chip thickness is modeled to include the dynamic modulation caused by the tool vibration while the dynamic regenerative effects are taken into account. The numerical method is used to solve the...
2008 / Li Zhongqun, Liu Qiang -
Process-condition-driven Automatic Location of Components
Abstract In order to reduce the development cycle of mechanical products and corresponding toolings, a large number of components are utilized in these structures. Accordingly, automatic location method for components is a key issue in the research...
2010 / Qiu Yi, Zheng Guolei, Rao Youfu, Liu Fang -
An Efficient Method for Reliability-based Multidisciplinary Design Optimization
Abstract Design for modern engineering system is becoming multidisciplinary and incorporates practical uncertainties; therefore, it is nec-essary to synthesize reliability analysis and the multidisciplinary design optimization (MDO) techniques for...
2008 / Fan Hui, Li Weiji -
Multidisciplinary Design and Optimization of Multistage Ground-launched Boost Phase Interceptor Using Hybrid Search Algorithm
Abstract This article proposes a multidisciplinary design and optimization (MDO) strategy for the conceptual design of a multistage ground-based interceptor (GBI) using hybrid optimization algorithm, which associates genetic algorithm (GA) as a...
2010 / Qasim Zeeshan, Dong Yunfeng, Khurram Nisar, Ali Kamran, Amer Rafique -
A Novel Method of Trip Route Estimation based on Vehicle License Plate Recognition System
Abstract With the development and application of vehicle license plate recognition system, a novel trip route estimation method was proposed. vehicle license plate recognition vehicle path estimation method was proposed, first used GRUBBS to...
2013 / Hong Chen, Xiangchun Xie, Yongbo Feng, Jibiao Zhou -
Flow Induced Crystallization of Poly(ether-block-amide) from the Microinjection Molding Process and its Effect on Mechanical Properties2014 / Nan Zhang, Seong Ying Choi, Michael D. Gilchrist
-
System for Controlling the Accuracy and Reliability of Machining Operations on Machining Centres
Abstract During machining operations on machining centres, there are a large number of internal and external factors that act on the technological system. They generate errors that influence the manufacturing cost, productivity, and machining...
2013 / Dimitar Dimitrov, Viktoria Karachorova, Tamas Szecsi -
Effect of surface roughness on the aerodynamic performance of turbine blade cascade
Abstract The effect of surface roughness on the boundary development and loss behavior of turbine blades is investigated with different Reynolds numbers in this paper. The result shows that the velocity profile in boundary layer is plumper on rough...
2014 / Tao Bai, Jingyuan Liu, Weihao Zhang, Zhengping Zou -
Hybrid Method to Analyze Contact Stress Distribution on Dry Friction Interfaces
Abstract A hybrid method is established by combining photoelastic experiment and finite element analysis. The method is used to evaluate contact stress distribution on dry friction interfaces, such as the contact interfaces between shrouds of fan...
2011 / Qin-meng WANG, Jin ZHANG, Xiao-qiu MA, Ben-han DONG -
A Knowledge-based and Extensible Aircraft Conceptual Design Environment
Abstract Design knowledge and experience are the bases to carry out aircraft conceptual design tasks due to the high complexity and integration of the tasks during this phase. When carrying out the same task, different designers may need individual...
2012 / Haocheng FENG, Mingqiang LUO, Hu LIU, Zhe WU -
Space Debris Reentry Analysis Methods and Tools
Abstract The reentry of uncontrolled spacecraft may be broken into many pieces of debris at an altitude in the range of 75-85 km. The surviving fragments could pose great hazard and risk to ground and people. In recent years, methods and tools for...
2011 / Ziniu WU, Ruifeng HU, Xi QU, Xiang WANG, Zhe WU -
Can Japanese Manufacturing Industry Provide Through-life Engineering Services?
Abstract The traditional manufacturing industry should shift to the manufacturing-service industry that provides both of products and through-life engineering services. However, it seems that Japanese manufacturing industry cannot follow this trend. ...
2015 / Yasushi Umeda -
Optimization on Retrieving Containers based on Multi-phase Hybrid Dynamic Programming
Abstract Retrieving export containers from a container yard is an important part of the ship-loading process. This paper presents a three-phase hybrid algorithm to solve for an optimized working plan for a gantry crane to retrieve all the containers ...
2013 / Zhan Bian, Zhi-hong Jin -
Design and implementation of five-axis transformation function in CNC system
Abstract To implement five-axis functions in CNC system, based on domestic system Lan Tian series, an improved design method for the system software structure is proposed in this paper. The numerical control kernel of CNC system is divided into the...
2014 / Feng Wang, Hu Lin, Liaomo Zheng, Lei Yang, Jinjin Feng, et al. -
Comparison of Soot Particle Movement based on Crank Angle
Abstract In a diesel engine, soot was produced due to incomplete fuel combustion in a combustion chamber. Some of this soot sticks to the cylinder wall and interferes with lubricant oil. This soot causes the lubricant oil to contaminate and this...
2014 / M.H.M. Hanafi, W.M.F Wan Mahmood, Mohd Fadzli Bin Abdollah, S.A. Rafeq, N.F.M. Nor, et al.