Mechanical engineering topic list of research papers
-
An MILP approach for detailed scheduling of oil depots along a multi-product pipeline2017 / Hao-Ran Zhang, Yong-Tu Liang, Qi Liao, Jing Ma, Xiao-Han Yan
-
Application of Mathematical Models Using Volumetric Transfer Coefficients in Fluidized Bed Dryers
Abstract Fluidized bed dryers are often used in several industrial processes to dry wet granular solids with high moisture contents. During the drying process, simultaneous heat- and mass transfer occurs between the material and drying gas. Drying...
2017 / Tibor Poós, Viktor Szabó -
Analysis of Fluid-Solid-Thermal Coupling for Ball Screw in Boring-milling Machining Center
Abstract The paper studies on the hollow screw in X axis of boring-milling machining center. By means of the flow of the screw at different speeds and different cooling fluid, the fluid-solid-thermal coupling is researched. The heat deformation of...
2017 / Xingshan Li, Jianing Xu -
Optimization of the Workpiece Location in a Machining Robotic Cell2012 / António M. Lopes, E.J. Solteiro Pires
-
Contributors2017 /
-
Dynamic interactions of an integrated vehicle–electromagnetic energy harvester–tire system subject to uneven road excitations2017 / Jing Tang Xing, Zhe Sun, Sulian Zhou, Mingyi Tan
-
Development of Electric Brush-plating Machine Tool Based on Inverter
Abstract Electric brush-plating is very useful in surface strengthen and redemption for shaft. The spindle of Electric brush-plating machine tool is infinitely variable speed. On the basis of frequency control, the infinitely variable speeds control ...
2017 / Jianxin Zhang, Zhongmin Wang -
A planar nano-positioner driven by shear piezoelectric actuators2016 / W. Dong, H. Li, Z. Du
-
Position control of a bio-inspired semi-active joint with direct inverse hysteresis modeling and compensation2016 / Y. Liu, X. Zang, Z. Lin, W. Li, J. Zhao
-
Full-automatic Special Drill Hydraulic System and PLC Control2016 / Xue Jun Tian
-
Effect of the Method for Treatment of the Functional Surface of a Piezoelectric Vibration Sensor on its Sensitivity
Abstract The investigation has been performed for the possibilities to improve the operating characteristics of aviation vibration sensors without increasing the cost price of their manufacture due to optimization of the microgeometry of functional...
2017 / Y.S. Andreev, N.A. Demkovich, R.M. Isaev, A.A. Tselischev, S.D. Vasilkov -
Analysis of the Coefficient of Variation for Injection Pressure in a Compression Ignition Engine
Abstract Pressure variability in injection pipes (p w ) supplying fuel to a diesel engine cylinder was analyzed. Pressure levels were recorded at the injector nozzle. To define the...
2017 / Andrzej Bąkowski, Leszek Radziszewski, Milan Žmindak -
Towards Design of Prognostics and Health Management Solutions for Maritime Assets
Abstract With increase in competition between OEMs of maritime assets and operators alike, the need to maximize the productivity of an equipment and increase operational efficiency and reliability is increasingly stringent and challenging. Also,...
2017 / Octavian Niculita, Obinna Nwora, Zakwan Skaf -
Vibration Transmitted to the Human Body during the Patient’s Ride in a Wheelchair2017 / Zygmunt Dziechciowski, Magdalena Kromka-Szydek
-
Noise Calculation Method for Industrial Premises with Bulky Equipment at Mirror-diffuse Sound Reflection
Abstract The paper presents a method of sound energy characteristics calculation in premises with bulky equipment at mirror-diffuse character of sound reflection from enclosures. At such character of reflection a part of sound energy falling on an...
2017 / I. Tsukernikov, A. Antonov, V. Ledenev, I. Shubin, T. Nevenchannaya -
A layered cooling process in whole quenching process for lightweight front axle beam2015 / Kai Gao, Xunpeng Qin, Zhou Wang, Shengxiao Zhu, Zhenyu Yuan, et al.
-
Concept of Improving Positioning of Pneumatic Drive as Drive of Manipulator
Abstract The paper presents a mathematical model of pneumatic actuator based on a piston rod air double acting cylinder. The model was solved using MATLAB Simulink. The results of model simulations were compared with experimental results and the...
2017 / Łukasz Magdziak, Ireneusz Malujda, Dominik Wilczyński, Dominik Wojtkowiak -
Simulating the effects of turbocharging on the emission levels of a gasoline engine
Abstract The main objective of this work was to respond to the global concern for the rise of the emissions and the necessity of preventing them to form rather than dealing with their after-effects. Therefore, the production levels of four main...
2017 / Amir Reza Mahmoudi, Iman Khazaee, Mohsen Ghazikhani -
Lateral motion control of skid steering vehicles using full drive-by-wire system
Abstract This paper introduces a control system to stabilize the motion of skid steering vehicles, extends their stability limit and makes their handling performance similar to that of the conventional two-wheel steering vehicle. For this purpose,...
2017 / Ossama Mokhiamar, Semaan Amine -
The Influence of Flow Tube Vibrations over the Efficiency of Solar Water Heating Collectors
Abstract The effect of vibrations over a flow tube from a solar water heating collector was studied in order to enhance the heat exchange. First, a hydrodynamic model for the internal flow of the tube was proposed, in order to obtain the pattern for ...
2017 / Adrian Ciocănea, Dorin Laurențiu Burețea