Mechanical engineering topic list of research papers
-
Reliability Evaluation Method for Oil–Paper Insulation in Power Transformers2011 / Youyuan Wang, Senlian Gong, Stanislaw Grzybowski
-
Visual Control of Robots Using Range Images2010 / Jorge Pomares, Pablo Gil, Fernando Torres
-
A Fuzzy Logic Global Power Management Strategy for Hybrid Electric Vehicles Based on a Permanent Magnet Electric Variable Transmission2012 / Abdelsalam Ahmed Abdelsalam, Shumei Cui
-
Two-Layer Storage Scheme and Repair Method of Failure Data in Wireless Sensor Networks2012 / Yulong Shen, Xiaowei Dang, Min Shu, Ning Xi, Jianfeng Ma
-
Real-time precision pedestrian navigation solution using Inertial Navigation System and Global Positioning System2015 / Y.-J. Yoon, K. H. H. Li, J. S. Lee, W.-T. Park
-
Preparation and Characterization of Silver Liquid Thin Films for Magnetic Fluid Deformable Mirror2015 / L. Zhang
-
Special Issue on advances in micro/nanoscale fluid flow and heat transfer2015 / X.-D. Wang, X. Zhang, J.-L. Xu, Y.-Y. Yan, D. Liu, et al.
-
Analytical method of predicting turbulence transition in pipe flow2012 / Henri Soumerai, Brigid E. Soumerai-Bourke
-
Design of permanent magnet motor actuator used in 550 kV gas-insulated switchgear disconnector2015 / K. Shi, X. Lin, J. Xu
-
Modulated Tool Path (MTP) Machining for Threading Applications
Abstract The modulated tool path (MTP) chip breaking process has been modified to improve chip management capabilities and to prevent large chip nest accumulations commonly encountered in threading operations. The use of MTP to create segmented...
2015 / Luke Berglind, John Ziegert -
Self-repairing design process applied to a 4-bar linkage mechanism2015 / C. Bell, M. Farnsworth, J. Knowles, A. Tiwari
-
A Hybrid Time-frequency Domain Approach for Numerical Modeling of Reciprocating Compressors
Abstract In the reciprocating compressor field, strong attention is paid to the study of pressure wave propagation in the discharge and suction pipelines. Oscillating pressure waves may lead to mechanical vibrations and failures and affect the...
2015 / Isacco Stiaccini, Luca Romani, Lorenzo Ferrari, Giovanni Ferrara -
Adaptive Nonlinear Optimal Compensation Control for Electro-hydraulic Load Simulator
Abstract Directing to the strong position coupling problem of electro-hydraulic load simulator (EHLS), this article presents an adaptive nonlinear optimal compensation control strategy based on two estimated nonlinear parameters, viz. the flow gain...
2011 / Yao Jianyong, Jiao Zongxia, Shang Yaoxing, Huang Cheng -
A Sequential Constraint Solver to Simulate Assembling Operations for Tolerance Analysis
Abstract In the variational modeling of assemblies it is important to define the location of a part both in absolute terms and with respect to the position/orientation of other assembled parts. The present paper proposes a programming optimization...
2013 / Pasquale Franciosa, Salvatore Gerbino, Stanislao Patalano -
An Evaluation Method Based on Mechanical Parts Structural Characteristics for Proactive Remanufacturing
Abstract Currently, due to the uncertainty of operation loading and service time, sometimes the mechanical parts are difficultly or hardly to be remanufactured. On the otherwise, it is also wasteful to remanufacture these parts too early. In...
2014 / Xuan Zhou, Qingdi Ke, Shouxu Song, Ming Liu -
Adaptive Due Date Deviation Regulation Using Capacity and Order Release Time Adjustment
Abstract A control-theoretic, order due date deviation regulation method is presented in this paper for work systems that can dynamically adjust their capacity and order release times. The relationship between due date deviations and work system...
2014 / I. Falu, N. Duffie -
Combined Numerical-experimental Study of Dual Fuel Diesel Engine
Abstract In the present paper the authors discuss the effect of different fuel ratios on the performance and emission levels of a common rail diesel engine supplied with natural gas and diesel oil. Dual fuel operation is characterized by a diesel...
2014 / Carmelina Abagnale, Maria Cristina Cameretti, Luigi De Simio, Michele Gambino, Sabatino Iannaccone, et al. -
Energy, Economic and Environmental Assessments for Gas-turbine Integration into an Existing Coal-fired Power Plant
Abstract The concept of repowering existing power plants has been recently revalued, in the light of the increasing energy needs, combined with the cost and the difficulty in developing new generating capacity. Among technologies for existing steam...
2014 / Roberto Carapellucci, Lorena Giordano -
Fuzzy Life-Extending Control of Anti-Lock Braking System
Abstract The repeated operation of the Anti-Lock Braking System (ABS) causes accumulation of structural damages in its different subsystems leading to reduction in their functional life time. This paper proposes a Fuzzy Logic based Life-Extending...
2013 / Ahmed M. El-Garhy, Gamal A. El-Sheikh, Mohamed H. El-Saify -
Flow Stability Model for Fan/Compressors with Annular Duct and Novel Casing Treatment
Abstract A three-dimensional compressible flow stability model is presented in this paper, which focuses on stall inception of multi-stage axial flow compressors with a finite large radius annular duct configuration for the first time. It is shown...
2012 / Xiaohua LIU, Dakun SUN, Xiaofeng SUN, Xiaoyu WANG