Mechanical engineering topic list of research papers
-
Comparison of Different Methods of Non-contact Vibration Measurement
Abstract Practical problems of vibration measurement and calculation are considered. Different non-contacts methods of vibration measurement (with Polytec® OFV-534 1D laser vibrometer, Polytec® PSV-400-3D scanning vibrometer, ARAMIS® system) and a...
2017 / D.S. Lezhin, S.V. Falaleev, A.I. Safin, A.M. Ulanov, D. Vergnano -
Calculation of Vibration of Pipeline Bundle with Damping Support Made of MR Material
Abstract Wire damping materials (such as Metal Rubber, MR) are used widely for protection of pipelines against vibration. A calculation method for bundle of arbitrary shape pipelines with damping supports made of MR material by finite element method ...
2017 / S.A. Bezborodov, A.M. Ulanov -
Experimental research on the machinability of Hardox steel by abrasive waterjet cutting2017 / Alexandru Catalin Filip, Mircea Anton Vasiloni, Laurentiu Aurel Mihail
-
Optimal Control of an Underwater Glider Vehicle
Abstract The aim of this paper is the trajectory control and navigation of an underwater autonomous mobile robot. The robot discussed in this paper is part of a new class of AUV's (Autonomous Underwater Vehicles) called underwater gliders. The...
2017 / Renan da Silva Tchilian, Elvira Rafikova, Salimzhan A. Gafurov, Marat Rafikov -
Differential Quadrature Method Based Study of Vibrational Behaviour of Inclined Edge Cracked Beams2017 / Shivani Srivastava, Raju Sethuraman
-
An Aerial Video Stabilization Method Based on SURF Feature2016 / Hao Wu, Shao-Yang He
-
Data-driven automatic parking constrained control for four-wheeled mobile vehicles2017 / Wenxu Yan, Jing Deng, Dezhi Xu
-
Simulation on Vessel Intelligent Collision Avoidance Based on Artificial Fish Swarm Algorithm2016 / Weifeng Li, Wenyao Ma
-
From the elastica compass to the elastica catapult: an essay on the mechanics of soft robot arm2017 / C. Armanini, F. Dal Corso, D. Misseroni, D. Bigoni
-
Energy-efficacy comparisons and multibody dynamics analyses of legged robots with different closed-loop mechanisms2016 / Kazuma Komoda, Hiroaki Wagatsuma
-
The Effect of Nano-Aluminumpowder on the Characteristic of RDX based Aluminized Explosives Underwater Close-Filed Explosion2017 / Yin Junting, Yuan Baohui, Zhou Tao, Li Gang, Ren Xinlian
-
Optimum surface roughness prediction for titanium alloy by adopting response surface methodology
Abstract Titanium alloy has been widely applied in industrial engineering products due to its advantages of great corrosion resistance and high specific strength. This paper investigated the processing parameters for finish turning of titanium alloy ...
2017 / Aimin Yang, Yang Han, Yuhang Pan, Hongwei Xing, Jinze Li -
Wayside detection of faults in railway axle bearings using time spectral kurtosis analysis on high-frequency acoustic emission signals2016 / A. Amini, M. Entezami, Z. Huang, H. Rowshandel, M. Papaelias
-
Research on hot stamping for a typical part of B1500HS boron steel using experiment and numerical simulation methods2016 / Huiping Li, Bingtao Tang, Lianfang He, Cheng Wang
-
Combined Ultrasonic Elliptical Vibration and Chemical Mechanical Polishing of Monocrystalline Silicon2016 / Defu Liu, Tao Chen, Riming Yan
-
Design of a Hyperbaric Chamber for Pressure Testing2014 / Shahmir Fikhri bin Mohamad Sazali, Mark Ovinis
-
Design of synchronous optimal control strategy based on double motor drive precision air suspension platform2016 / Xiang Ling, Yu Zhang, Xiao-kun Guo, Xi-feng Li
-
On the assessment of a tunable auxiliary mass damper with a friction damper in its suspension: numerical study2016 / E.L.C. Guerineau, H.T. Coelho, F.P. Lepore Neto, M.B. Santos, J. Mahfoud
-
Investigating reliability centered maintenance (RCM) for public road mass transportation vehicles2016 / James Hopkinson, Noel Perera, Evran Kiazim
-
Modelling of friction stir welding of DH36 steel2017 / M. Al-moussawi, A. J. Smith, A. Young, S. Cater, M. Faraji