Mechanical engineering topic list of research papers
-
A combination method of the theory and experiment in determination of cutting force coefficients in ball-end mill processes
Abstract In this paper, the cutting force calculation of ball-end mill processing was modeled mathematically. All derivations of cutting forces were directly based on the tangential, radial, and axial cutting force components. In the developed...
2015 / Yung-Chou Kao, Nhu-Tung Nguyen, Mau-Sheng Chen, Shyh-Chour Huang -
Simulation and Experimental Study of Selected Parameters of the Multifunction Steering Wheel in the View of Users’ Abilities and Accuracy of Vehicle Maneuvers
Abstract Individual adjustment of the controls, that are part of the driver interface, for people with different levels of disability requires a specific design approach. Individualization in this respect may result in a larger group of people being ...
2015 / Włodzimierz Choromański, Iwona Grabarek, Maciej Kozłowski -
Effect of processing parameters of rotary ultrasonic machining on surface integrity of potassium dihydrogen phosphate crystals2015 / J. Zhang, D. Wang, P. Feng, Z. Wu, D. Yu
-
Modelling and control of an omnidirectional mobile manipulator2016 / Salima Djebrani, Abderraouf Benali, Foudil Abdessemed
-
An approach for machining allowance optimization of complex parts with integrated structure
Abstract Currently composite manufacturing process, such as linear friction welding plus NC machining, is the main method for the manufacturing and repairing of complex parts with integrated structure. Due to different datum position and inevitable...
2015 / Ying Zhang, Dinghua Zhang, Baohai Wu -
Investigation of mechanical responses to the tactile perception of surfaces with different textures using the finite element method2016 / W. Tang, J. Zhang, X. Shi, S. Zhang, S. Liu, et al.
-
Multi-routing planning design of Y-type urban rail transit2016 / X. Zhao, Q. Sun, Y. Zhu, Y. Ding, C. Ma, et al.
-
Separation Process by Porous Membranes: A Numerical Investigation2014 / A. de Lima Cunha, J. S. de Souza, S. R. de Farias Neto, A. G. B. de Lima, E. S. Barbosa
-
Improvement of Swirl Chamber Structure of Swirl-Chamber Diesel Engine Based on Flow Field Characteristics2014 / W. Yuan, Y. Ma, J. Fu, W. Chen
-
Performances of PID and Different Fuzzy Methods for Controlling a Ball on Beam2016 / Vu Trieu Minh, Tamre Mart, Reza Moezzi, Mets Oliver, Jurise Martin, et al.
-
Research on Evaluation Model for Secondary Task Driving Safety Based on Driver Eye Movements2014 / L. Jin, H. Xian, Y. Jiang, Q. Niu, M. Xu, et al.
-
A Model to Determine Mesh Characteristics in a Gear Pair with Tooth Profile Error2014 / Q. Wang, P. Hu, Y. Zhang, Y. Wang, X. Pang, et al.
-
Multi-objective Optimal Energy Management Strategy and Economic Analysis for an Range-Extended Electric Bus
Abstract An optimal energy management strategy is proposed to match engine fuel consumption and battery SOH of REEB. Models of APU fuel consumption and battery SOH loss are established and multi-objective performance function is provided. DP...
2016 / Jun-qiu Li, Xin Jin, Rui Xiong -
The Thermohydrodynamic Analysis of Sliding Bearing High-Speed Motorized Spindle by Rotor Dynamic2017 / Songsheng Li, Yuan Shen, Yuxin Lu
-
An active mass damper using rotating actuator for structural vibration control2016 / Y. Zhang, L. Li, B. Cheng, X. Zhang
-
Multi-scale pin fins: Scale analysis and mathematical optimization of micro-pin fins arranged in rows2015 / Tunde Bello-Ochende
-
Integrated computational materials engineering from a gas turbine engine perspective2014 / Ann Bolcavage, Paul D Brown, Robert Cedoz, Nate Cooper, Chris Deaton, et al.
-
Set-point Control of Mobile Robot with Obstacle Detection and Avoidance Using Navigation Function - Experimental Verification2016 / Wojciech Kowalczyk, Mateusz Przybyla, Krzysztof Kozlowski
-
Comparison of Measured Residual Stress Distributions in Extra-Thick Butt Welds Joined by One-Pass EGW and Multipass FCAW2014 / J.-U. Park, G. An, W. C. Woo, J.-h. Choi, N. Ma
-
Responses of a Highly Accelerated Life Test System to Impacts from Different Designs of Hammers2014 / Y.-S. Chen, L. H. Chuong