Mechanical engineering topic list of research papers
-
Analysis of interrelationship between pedestrian flow parameters using artificial neural network2015 / Pritikana Das, M. Parida, V. K. Katiyar
-
Research on Robot Surface Tracking Motion Based on Force Control of Six-Axis Wrist Force Sensor2015 / Z. Wang, W. Liu, B. Cui, J. He, Z. Li, et al.
-
Structural design of a mechanical arm for harvest of cactus pear type Alfajayucan
Abstract Cactus prickly pear (Tuna) harvest is a complicated operation that continues in a rudimentary way, in the majority of cases manual and with the help of tools such as knives and rods which sometimes affect the fruit. In this research is...
2016 / H. Durán-García, O. Guarneros-García, C. Jiménez Delgado, E. Rossel-Kipping, J. Pulido-Delgado -
Non-equilibrium steady states of entangled polymer mixtures under shear flow2015 / X.-W. Guo, W.-J. Yang, X.-H. Xu, Y. Cao, X.-J. Yang
-
The Automatic Drilling System of 6R-2P Mining Drill Jumbos2015 / Y. Wang, C. Fang, Q. Jiang, S. N. Ahmed
-
Adaptive Parameter Identification Based on Morlet Wavelet and Application in Gearbox Fault Feature Detection2010 / Shibin Wang, ZK Zhu, Yingping He, Weiguo Huang
-
Theoretical study on ignition compensating temperature sensitivity2015 / M. Liu, X. Zhang, L. Yu, X. Han
-
Experimental results of the tribology of aluminum measured with a pin-on-disk tribometer: Testing configuration and additive effects2016 / S. M. H. Ahmer, L. S. Jan, M. A. Siddig, S. F. Abdullah
-
Optimizing Material Deposition Direction for Functional Internal Architecture in Additive Manufacturing Processes
Abstract One of the major constraints of additive manufacturing processes is its relatively slower speed. Higher throughput is achieved by using newer and better hardware which is limited under many circumstances. Better additive manufacturing...
2015 / Ahasan Habib, Nazmul Ahsan, Bashir Khoda -
Numerical Validation of the Incremental Launching Method of a Steel Bridge Through a Small-Scale Experimental Study2016 / R. Chacón, N. Uribe, S. Oller
-
Development of hardware system using temperature and vibration maintenance models integration concepts for conventional machines monitoring: a case study2015 / Michael Kanisuru Adeyeri, Khumbulani Mpofu, Buliaminu Kareem
-
Digitisation of a moving assembly operation using multiple depth imaging sensors2015 / Vinayak Ashok Prabhu, Boyang Song, John Thrower, Ashutosh Tiwari, Phil Webb
-
Adaptive RBF Neural Vibration Control of Flexible Structure2015 / T. Hu, J. Fei
-
Failure observation of the AZ31B magnesium alloy and the effect of lead addition content under ballistic impact2015 / M. F. Abdullah, S. Abdullah, M. Z. Omar, Z. Sajuri, R. M. Sohaimi
-
Comparison of wing-propeller interaction in tractor and pusher configuration2016 / K. Chinwicharnam, C. Thipyopas
-
Delphi Method for Estimating Membership Function of Uncertain Set2016 / Haiying Guo, Xiaosheng Wang, Lili Wang, Dan Chen
-
VISSIM Simulation Based Expressway Exit Control Modes Research
Abstract In order to investigate the urban expressway off-ramp control problems, the traffic simulation software VISSIM is adopted. According to the traffic characteristics of the expressway off-ramp, the parameters of traffic model are determined....
2016 / Zhu Zhandong, Chen Shaohui, Yang Yanquan, Hu Aixiu, Zheng Xinyi -
Performance Analysis of Functionally Graded Coatings in Contact with Cylindrical Rollers2015 / R. Jahedi, S. Adibnazari, G. H. Farrahi
-
Design of intelligent locks based on the triple KeeLoq algorithm2016 / H. Chen, J. Liu, C.-F. Yang
-
Optimal linear generator with Halbach array for harvesting of vibration energy during human walking2016 / J. Jun, Y. Shin, S.-J. Cho, Y.-W. Cho, S. H. Lee, et al.