Mechanical engineering topic list of research papers
-
Multi-objective Optimization Method for Automatic Drilling and Riveting Sequence Planning
Abstract There are numerous riveting points on the large-sized aircraft panel, irregular row of riveting points on delta wing. It is essential to plan the riveting sequence reasonably to improve the efficiency and accuracy of automatic drilling and...
2011 / Xiao Hong, Li Yuan, Zhang Kaifu, Yu Jianfeng, Liu Zhenxing, et al. -
An Aerial–Ground Robotic System for Navigation and Obstacle Mapping in Large Outdoor Areas2013 / Mario Garzón, João Valente, David Zapata, Antonio Barrientos
-
Advances in the development of a virtual car driver2009 / M. Thommyppillai, S. Evangelou, R. S. Sharp
-
A Modified Social Force Model for Pedestrian Behavior Simulation at Signalized Crosswalks
Abstract In this study, a microscopic simulation model is developed for pedestrian behavior analysis at signalized crosswalks. It takes into account the special characteristics of pedestrian crossing behavior, such as group evasion with surrounding...
2014 / Weiliang Zeng, Hideki Nakamura, Peng Chen -
Simulation and optimization of coal-fired power plants
Abstract This study identified and determined optimal design and operating conditions that would offer the maximum power plant efficiency of both subcritical and supercritical pulverized coal-fired power plants. A process-based computer model of the ...
2009 / Teerawat Sanpasertparnich, Adisorn Aroonwilas -
Vortex Patterns of the Flow in a Curved Duct
Abstract The vortex patterns of the secondary flow in a curved duct of square cross-section are numerically investigated. The flow is driven by the axial pressure gradient as well as the walls rotation of the duct except the outer wall around the...
2011 / Xiaoyun Wu, Sangding Lai, Kyoji Yamamoto, Shinichiro Yanase -
Study on Finite Element Model of Traffic Flow based on Weighted Residual Method
Abstract In order to reduce and avoid traffic jam or secondary accidents caused by traffic accidents, a finite element model of traffic flow is established using weighted residual method based on the fluid dynamics theory of traffic flow. An...
2011 / Fuxiang Li, Wenyong Li, Fang Xie -
Modular Design of Machine Tools to Facilitate Design for Disassembly and Remanufacturing
Abstract Modular design as a modern design methodology can respond to market changes rapidly. At the same time, it is able to shorten product design and manufacturing cycle, improve product quality and reliability, and facilitate product disassembly ...
2014 / Pengjiawang, Yongxian Liu, S.K. Ong, A.Y.C. Nee -
Long-term mechanical properties of smart cable based on FBG desensitized encapsulation sensors2014 / Sheng Li, Min Zhou
-
Sensor Integration and Fusion for Autonomous Screwing Task by Dual-Manipulator Hand Robot
Abstract Sensing and manipulation of small objects are among the most challenging, requiring a very high degree of coordinated actuation in producing assembly work robots. It is inevitable for the development of a robot that is designed to execute...
2012 / R.L.A. Shauri, K. Saiki, S. Toritani, K. Nonami -
Performance Analysis of a 3D Axisymmetric Oscillating Water Column
Abstract This paper presents an analysis, by numerical simulation, of the effects of some geometric parameters on the efficiency of an axisymmetric oscillating water column wave energy converter by using ANSYS ICEM CFD and CFX. The study is focused, ...
2014 / L. Zaoui, B. Bouali, S. Larbi, A. Benchatti -
Fuzzy adaptive tracking control within the full envelope for an unmanned aerial vehicle
Abstract Motivated by the autopilot of an unmanned aerial vehicle (UAV) with a wide flight envelope span experiencing large parametric variations in the presence of uncertainties, a fuzzy adaptive tracking controller (FATC) is proposed. The...
2014 / Zhi Liu, Yong Wang -
Modeling and Simulation of a Screw-Worm Gear Mechanical Transmission to Achieve its Optimal Design under Imposed Constraints2011 / Claudiu Suciu, Hozumi Goto, Hisanori Abiru
-
A STEP-compliant Method for Manufacturing Knowledge Capture
Abstract Over the last 50 years the development of CNC machines has seen a plethora of part programming languages. These programming languages have provided major barriers for the interoperability of information between CNC machines and...
2014 / X. Zhang, B. Afsharizand, W. Essink, S.T. Newman, A. Nassehi -
Dynamic Analysis of a Rotating Shaft Subject to the Double Cutting Force and Time-varying Mass Effects of the Rod
Abstract This paper investigates the dynamic behaviors of a rotating shaft subjected to the double cutting force and time-varying mass effects. The Timoshenko beam theory is used to model the rotating shaft, and the general boundary condition is...
2014 / W.C. Hsu, C.H. Kang, Y.W. Chen, T.N. Shiau, D.S. Liu -
An Experimental Study on Performance and Emission Characteristics of Vegetable Oil Blends with Diesel in a Direct Injection Variable Compression Ignition Engine
Abstract In order to meet the energy requirements, there has been growing interest in alternative fuels like vegetable oils, biodiesels, biogas, LPG, CNG to provide a suitable diesel oil substitute for internal combustion engine. Vegetable oils,...
2014 / B. De, R.S. Panua -
Analysis of the effects of evaporative cooling on the evaporation of liquid droplets using a combined field approach2015 / Xuefeng Xu, Liran Ma
-
Vibration characteristic analysis method for the quartz microgyroscope based on the admittance circle2014 / Haoxu Wang, Peitao Dong, Liqiang Xie, Xuezhong Wu
-
Static characteristic analysis and experimental research of aerostatic thrust bearing with annular elastic uniform pressure plate2015 / H. Dong, X.-L. Zhao, J.-a. Zhang
-
The Efficiency of Non-Flammable Functional Underwear2014 / Viera Glombikova, Petra Komarkova