Mechanical engineering topic list of research papers
-
Response Ant Colony Optimization of End Milling Surface Roughness2010 / K. Kadirgama, M. M. Noor, Ahmed N. Abd Alla
-
Mechanical Hybrid KERS Based on Toroidal Traction Drives: An Example of Smart Tribological Design to Improve Terrestrial Vehicle Performance2013 / Francesco Bottiglione, Giuseppe Carbone, Leonardo De Novellis, Luigi Mangialardi, Giacomo Mantriota
-
A Novel Drive Option for Piezoelectric Ultrasonic Transducers2011 / Diana Engelke, Bernd Oehme, Jens Strackeljan
-
Granular pressure—temperature relation during regime change in a simple shear state
Abstract In a recent study, a regime chart was established for sheared granular systems. For a soft particle system under simple shear, the internal stress showed a range of rate dependency. As the particle concentration increased, the system...
2013 / Hayley Shen -
Mode decomposition of a noise suppressed mixing layer
Abstract Noise is generated in atwo-dimensional mixing layer due to the growing of instability waves and vortex pairings. The adjoint-based control methodology has shown to be arobust tool to suppress noise radiation. The mode decomposition...
2013 / Zhenhua Wan, Haihua Yang, Lin Zhou, Dejun Sun -
Power Loss Characteristics of a Sensing Element Based on a Polymer Optical Fiber under Cyclic Tensile Elongation2011 / Yung-Chuan Chen, Li-Wen Chen, Wei-Hua Lu
-
Development of a Multisensor-Based Bio-Botanic Robot and Its Implementation Using a Self-Designed Embedded Board2011 / Chung-Liang Chang, Ming-Fong Sie, Jin-Long Shie
-
High-Performance Piezoresistive MEMS Strain Sensor with Low Thermal Sensitivity2011 / Ahmed Mohammed, Walied Moussa, Edmond Lou
-
Influence of geometrical characteristics of sidewall-type multiple aneurysms on hemodynamic factors2015 / Y. Hua, Y. B. Kim, J. H. Oh
-
Energy Efficient Process Chain: The Impact of Cutting Fluid Strategies
Abstract Machining processes can be realized using different cutting fluid strategies–flood, dry and minimum quantity lubrication (MQL). The choice of each strategy directly influences the need of peripheral units (e.g. filter units) and additional...
2015 / Nadine Madanchi, Denis Kurle, Marius Winter, Sebastian Thiede, Christoph Herrmann -
Energy-based control for a biologically inspired hexapod robot with rolling locomotion
Abstract This paper presents an approach to control rolling locomotion on the level ground with a biologically inspired hexapod robot. For controlling rolling locomotion, a controller which can compensate energy loss with rolling locomotion of the...
2015 / Takuma Nemoto, Rajesh Elara Mohan, Masami Iwase -
Mechanism of a Hair Cell Bioinspired Sensor with Ultrasensitivity to Weak and Low Frequency Vibration Signals2013 / L. J. Liu, Y. Lei
-
Prediction of Temperature Induced Shape Deviations in dry Milling
Abstract In this paper a model for a simulation based prediction of temperature induced shape deviations in dry milling is presented. A closed loop between Boolean material removal, process forces, heat flux and thermoelastic deformation is...
2015 / B. Denkena, A. Schmidt, P. Maaß, D. Niederwestberg, C. Niebuhr, et al. -
Multiscale Structural Health Monitoring of Cable-Anchorage System Using Piezoelectric PZT Sensors2013 / Khac-Duy Nguyen, Jeong-Tae Kim, Young-Hwan Park
-
Modelling and analysis of system robustness for mechanical product based on axiomatic design and fuzzy clustering algorithm2015 / X. Cheng, S. Zhang, T. Wang
-
Hydrodynamic modeling of semi-planing hulls with air cavities2015 / Konstantin I. Matveev
-
Synthesis of 3-Fourteen Alkoxy-2-hydroxypropyl Triethyl Ammonium Chloride and Inhibiting Corrosion Performance2015 / Y. Hao, Z. Wang, B. Cui, Y. Qi, R. Zhang
-
Computational fluid dynamics and particle image velocimetry assisted design tools for a new generation of trochoidal gear pumps2015 / M. Garcia-Vilchez, P. Gamez-Montero, E. Codina, R. Castilla, G. Raush, et al.
-
Driving modes for designing the cornering response of fully electric vehicles with multiple motors
Abstract Fully electric vehicles with multiple drivetrains allow a significant variation of the steady-state and transient cornering responses through the individual control of the electric motor drives. As a consequence, alternative driving modes...
2015 / Leonardo De Novellis, Aldo Sorniotti, Patrick Gruber -
Advances in finite element analysis for computational mechanics 20152015 / M. A. Wahab, N.-A. Noda, S. P. Bordas, W. Zhu, H. N. Xuan, et al.