Mechanical engineering topic list of research papers
-
An impulse-based energy tracking method for collision resolution
Abstract Discrete element methods can be based on either penalties or impulses to resolve collisions. A generic impulse based method, the energy tracking method (ETM), is described to resolve collisions between multiple non-convex bodies in three...
2014 / XuHai Tang, Adriana Paluszny, Robert W. Zimmerman -
A stabilized formulation with maximum entropy meshfree approximants for viscoplastic flow simulation in metal forming2014 / F. Greco, L. Filice, C. Peco, M. Arroyo
-
Improved thermal design methodology for wind power converters2013 / Fei Yang, Liang Guo
-
A cable feeder tool for robotized cable winding
Abstract Cable winding is an alternative technology to create stator windings in large electrical machines. Today such cable winding is performed manually, which is very repetitive, time-consuming and therefore also expensive. This paper presents...
2014 / Erik Hultman, Mats Leijon -
Aeroelastic two-level optimization for preliminary design of wing structures considering robust constraints
Abstract An aeroelastic two-level optimization methodology for preliminary design of wing structures is presented, in which the parameters for structural layout and sizes are taken as design variables in the first-level optimization, and robust...
2014 / Zhiqiang Wan, Bocheng Zhang, Ziliang Du, Chao Yang -
Design and Fabrication of an Injection Moulding Tool for Cam Bush with Baffle Cooling Channel and Submarine Gate
Abstract This research works is focused on design and fabrication of an automatic injection moulding tool for production of CAM BUSH which is used in electrical engines as a connector. An injection mould is a tool which is used for production of...
2013 / S. Selvaraj, P. Venkataramaiah -
Influence of Economic Conditions to the Specific Costs of Cooling by Chilling Machines
Abstract In combined cooling, heat and power concepts different plants of energy supply are combined to an energetically, economically and technically worthwhile system. The gain of these concepts is the production of energy in its needed form. The...
2014 / Janine R.M. Bruchmann, Shichang Wang -
Evaluation of the Mixture Formation Process of High Performance Engine with a Combined Experimental and Numerical Methodology
Abstract The combustion process of a Port Fuel Injection (PFI) engine is deeply influenced by the mixture formation process. The needs of reducing engine emission and fuel consumption push the engine manufactures to implement new advanced...
2014 / Claudio Forte, Gian Marco Bianchi, Enrico Corti, Buono Michele, Fantoni Stefano -
Calibration of an Industrial Robot Using a Stereo Vision System
Abstract Industrial robots have very good repeatability but still lack good absolute accuracy. The main reason is difference between the ideal robot kinematic model integrated in the robot controller and actual robot parameters. A method for...
2014 / Marko Švaco, Bojan Šekoranja, Filip Šuligoj, Bojan Jerbić -
Estimates of Pedestrian Crossing Delay based on Multiple Linear Regression and Application
Abstract Within the range of city traffic, a large number of intersections are out of control of traffic light, so the pedestrian delay and car delay, which are caused by the conflict between crossing pedestrian and right-turn cars, are very common. ...
2013 / Li Dan, Xiaofa Shi -
An experimental study of the dual-loop control of electro-hydraulic load simulator (EHLS)
Abstract This paper investigates motion coupling disturbance (the so called surplus torque) in the hardware-in-the-loop (HIL) experiments. The “velocity synchronization scheme” was proposed by Jiao for an electro-hydraulic load simulator (EHLS) in...
2013 / Chengwen Wang, Zongxia Jiao, Shuai Wu, Yaoxing Shang -
CFD Study of NOx Emissions in a Model Commercial Aircraft Engine Combustor
Abstract Air worthiness requirements of the aircraft engine emission bring new challenges to the combustor research and design. With the motivation to design high performance and clean combustor, computational fluid dynamics (CFD) is utilized as the ...
2012 / Man ZHANG, Zhenbo FU, Yuzhen LIN, Jibao LI -
Predicting Bus Real-time Travel Time Basing on both GPS and RFID Data
Abstract Instantaneous and accurate prediction of bus arrival time can help improve the quality of bus-arrival-time information service, and attract additional ridership. On the basis of bus running processes, a self-adaptive exponential smoothing...
2013 / Song Xinghao, Teng Jing, Chen Guojun, Shu Qichong -
Influence of the Cutting Edge Radius and the Cutting Edge Preparation on Tool Life and Cutting Forces at Inserts with Wiper Geometry
Abstract This article deals with the influence of cutting edge preparation and cutting edge radius on tool life, cutting forces and the roughness of machined surface. The cutting edge preparation was done on the inserts with wiper geometry which are ...
2014 / Jaroslava Fulemova, Zdeněk Janda -
Applied Research - the Best Bridge between School and Industry through Post Graduate Research Centre
Abstract Paper talks about the history of the oldest technical university in Slovakia, its development and current state of the education provided. The paper describes forms of cooperation of the Faculty of Mechanical Engineering (FME) with...
2014 / Ľubomír Šooš -
Performance Analysis of the Vehicle Diesel Engine-ORC Combined System Based on a Screw Expander2014 / Kai Yang, Hongguang Zhang, Songsong Song, Jian Zhang, Yuting Wu, et al.
-
Selection of the air heat exchanger operating in a gas turbine air bottoming cycle2014 / Tadeusz Chmielniak, Daniel Czaja, Sebastian Lepszy
-
Challenges in Bioenergy Production from Sugarcane Mills in Developing Countries: A Case Study2014 / Guido Colombo, William Ocampo-Duque, Fabio Rinaldi
-
Integrated optimization analyses of aerodynamic/stealth characteristics of helicopter rotor based on surrogate model
Abstract Based on computational fluid dynamics (CFD) method, electromagnetic high-frequency method and surrogate model optimization techniques, an integration design method about aerodynamic/stealth has been established for helicopter rotor. The...
2015 / Xiangwen Jiang, Qijun Zhao, Guoqing Zhao, Peng Li -
Combustion noise
Abstract Combustion noise is becoming increasingly important as a major noise source in aeroengines and ground based gas turbines. This is partially because advances in design have reduced the other noise sources, and partially because next...
2014 / Ann P. Dowling, Yasser Mahmoudi