Mechanical engineering topic list of research papers
-
A Comparative Energetic Analysis of Active and Passive Emission Control Systems Adopting Standard Emission Test Cycles2012 / Angelo Algieri, Mario Amelio, Pietropaolo Morrone
-
Randomness and Statistical Laws of Indentation-Induced Pop-Out in Single Crystal Silicon2013 / Hu Huang, Hongwei Zhao, Chengli Shi, Lin Zhang, Shunguang Wan, et al.
-
Numerical Simulation on Head-On Binary Collision of Gel Propellant Droplets2013 / Zejun Liu, Jianjun Wu, He Zhen, Xiaoping Hu
-
Maintenance Decision Based on Data Fusion of Aero Engines2013 / Huawei Wang, Jun Gao, Zhiyong Liu
-
New Findings by High-Order DNS for Late Flow Transition in a Boundary Layer2011 / Chaoqun Liu, Lin Chen, Ping Lu
-
Design of Fuzzy Controller for Robot Manipulators Using Bacterial Foraging Optimization Algorithm2012 / Mickael Aghajarian, Kourosh Kiani, Mohammad Mehdi Fateh
-
Studies on Exhaust Emissions from Copper-Coated Gasohol Run Spark Ignition Engine with Catalytic Converter2011 / S. Narasimha Kumar, K. Kishor, M. V. S. Murali Krishna, P. V. K. Murthy
-
Multiscale Numerical Study of 3D Polymer Crystallization during Cooling Stage2012 / Chunlei Ruan
-
Assessment of Microhardness Profile in Grinding Using Barkhausen Noise Technique at Various Analysis Parameters2011 / Saurabh Kumar, Mukesh Yadav, Prateek Agrawal, Mohd Zaheer Khan, Meghanshu Vashista
-
On Vibration and Noise Dissipation in Ship and FPSO Structures with Smart Systems2012 / Vincent O. S. Olunloyo, Charles A. Osheku
-
Improvement of Surface Accuracy and Shop Floor Feed Rate Smoothing Through Open CNC Monitoring System and Cutting Simulation
Abstract In the milling process of complex workpiece shapes the feed rate normally becomes instable due to the high degree of surface curvature that requires high acceleration and deceleration of the interpolated axes. This condition impacts on...
2012 / K. Schützer, E. Uhlmann, E. Del Conte, J. Mewis -
Transmission efficiency and noise, vibration and harshness refinement of differential hypoid gear pairs2013 / M. Mohammadpour, S. Theodossiades, H. Rahnejat, P. Kelly
-
Optimization of high-speed railway pantographs for improving pantograph-catenary contact
Abstract A crucial system for the operation of high-speed trains is the pantograph catenary interface as it is the sole responsible to deliver electrical power to the train. Being the catenary a stationary system with a long lifespan it is also less ...
2013 / Jorge Ambrósio, João Pombo, Manuel Pereira -
Vibration parameter measurement using the temporal digital hologram sequence and windowed Fourier transform
Abstract Real time digital recording and numerical reconstruction of a temporal digital hologram sequence have become feasible in recent years. They provide a new measurement method which enjoys the valuable advantages of being full-field,...
2011 / Chong Yang, Hong Miao -
An Intelligent Regenerative Braking Strategy for Electric Vehicles2011 / Guoqing Xu, Weimin Li, Kun Xu, Zhibin Song
-
Simultaneous Optimization for Hybrid Electric Vehicle Parameters Based on Multi-Objective Genetic Algorithms2011 / Lincun Fang, Shiyin Qin, Gang Xu, Tianli Li, Kemin Zhu
-
Free vibration analysis of perforated plate with square penetration pattern using equivalent material properties
Abstract In this study, the natural frequencies of the perforated square plate with a square penetration pattern are obtained as a function of ligament efficiency using the commercial finite-element analysis code ANSYS. In addition, they are used to ...
2015 / Myung Jo Jhung, Kyeong Hoon Jeong -
Numerical Simulation of All-Composite Compressed Natural Gas (CNG) Cylinders for Vehicle
Abstract Failures of all-composite CNG cylinders for vehicle in service were mainly caused by defects such as crazes, and cracks, etc. in cylinder liners. Authors adopted ANSYS software to conduct numerical simulation of all-composite CNG cylinders, ...
2012 / Zhong Yue, Xiaohui Li -
Evaluation Index Development for Intelligent Transportation System in Smart Community Based on Big Data2015 / R. Li, A. Kido, S. Wang
-
Spectral Solver for Multi-scale Plasma Physics Simulations with Dynamically Adaptive Number of Moments
Abstract A spectral method for kinetic plasma simulations based on the expansion of the velocity dis- tribution function in a variable number of Hermite polynomials is presented. The method is based on a set of non-linear equations that is solved to ...
2015 / Juris Vencels, Gian Luca Delzanno, Alec Johnson, Ivy Bo Peng, Erwin Laure, et al.