Mechanical engineering topic list of research papers
-
System Model of Heat and Mass Transfer Process for Mobile Solvent Vapor Phase Drying Equipment2014 / Shiwei Zhang, Yufang Zhu, Baozhen Qiao, Zhijun Zhang
-
Dynamics Modeling of Planetary Gear Set Considering Meshing Stiffness Based on Bond Graph
Abstract The aim of this article is to develop a valid and generalized dynamic model based on the bond graph theory for planetary gear set. In this regard, three sub-models are proposed: (a) carrier-planet sub-model, (b) ring-planet sub-model, (c)...
2011 / Luo Yutao, Tan Di -
A New State of Charge Estimation Method for LiFePO4 Battery Packs Used in Robots2013 / Ming-Hui Chang, Han-Pang Huang, Shu-Wei Chang
-
The Design of Executing Mechanism for Measured Carbon Content of Flying Ash Using Weightlessness Method
Abstract Based on the carbon content of fly ash's online monitoring of the implementation process of sector analysis, through the use of Pro/E, we set up components and whole model of carbon content in fly ashe's online monitoring and execution...
2012 / Xiangwei Chen, Zhaohui Liu, Zhikui Zhang, Qing Han -
Inverse Design of Transonic Airfoils Using Variable-Resolution Modeling and Pressure Distribution Alignment
Abstract The paper presents a computationally efficient and robust methodology for the inverse design of transonic airfoils. The approach replaces the direct optimization of an accurate, but computationally expensive, high-fidelity airfoil model by...
2011 / Leifur Leifsson, Slawomir Koziel, Stanislav Ogurtsov -
Contribution to Numerical Simulation of Laser Welding
Abstract Contribution deals with numerical simulation of thermal and stress fields in welding tubes made of austenitic stainless CrNi steel type AISI 304 with a pulsed Nd:YAG laser. Process simulation was realised by use of ANSYS 10 software....
2011 / Milan Turňa, Bohumil Taraba, Petr Ambrož, Miroslav Sahul -
The Optimization Analysis of Navigation Performance and Structural Properties of the High-Speed Monohull Ship in River
Abstract The authors use the weighting summation of rapidity and maneuverability as the sub-objective function of ship performances; By using the weighting summation of static and dynamic properties as the sub-objective function, The weighting...
2012 / He Yijia, Yang Songlin, Yang Zhao-long, Cheng Haibian, Li- Mi -
Influence of different cover ratios on Gas-particle flow characteristics of a centrally-fuel-rich primary air burner: experiment and simulation
Abstract The flow field for different cover ratios within a three-level conical ring concentrator of a centrally-fuel-rich swirl coal combustion burner has been studied both experimentally and numerically. A particle dynamics anemometer measurement...
2012 / Zhichao Chen, Shanping Shen, Zhengqi Li, Qunyi Zhu -
Bipedal Walking Robot-A Developmental Design
Abstract This paper presents developmental design of a simple bipedal walking robot. The robot replicates the walking style of a human particularlywalking upright. The robotisbuilt with light-weight Aluminium sheets which act as the structural...
2012 / Sujan Warnakulasooriya, Amin Bagheri, Nathan Sherburn, Madhavan Shanmugavel -
Maintenance Task Classification: Towards Automated Robotic Maintenance for Industry
Abstract The business model of high-value capital assets is shifting from purchasing a physical product to acquiring a result or a function supported by the product combined with a number of related services. One such service, maintenance, is...
2013 / H. Akrout, D. Anson, G. Bianchini, A. Neveur, C. Trinel, et al. -
Fast Cutter Workpiece Engagement Estimation Method for Prediction Of Instantaneous Cutting Force in Continuous Multi-Axis Controlled Machining
Abstract This study proposes a new efficient methodology to estimate an engagement between cutter of endmill and machined workpiece surface in continuous multi axis controlled machining process. In order to shorten calculation time for the...
2012 / Jun’ichi Kaneko, Kenichiro Horio -
Dynamic analysis of steering system of the articulated vehicle in the heeled status
Abstract In order to research the dynamic characteristic when the articulated vehicle accelerates, brakes and steers, it is necessary to analyze the force of the front and the rear car body and establish the steering dynamic mathematical model and...
2011 / Zhiguo Zhao, Chuansheng Si -
Research on the dynamic characteristics of mast mechanism of rotary drilling rig
Abstract In order to express the inherent complex dynamic characteristics of mast mechanism of rotary drilling rig synthetically and improve the smooth-going property of key parts and related hydraulic system in the lifting process. firstly, a...
2011 / Tao Jiang, Yiping You, Guangyan Xue, Anlin Wang -
Microstructural evolution in 316LN austenitic stainless steel during solidification process under different cooling rates2015 / Congfeng Wu, Shilei Li, Changhua Zhang, Xitao Wang
-
Modeling and Analysis of a Super Heavy Numeric Control Boring and Milling Machine
Abstract The structure of a super heavy numeric control boring and milling machine is introduced. The dynamic model is established on the simplified structure model. The virtual prototype of the machine tool is given for dynamic analysis. Then the...
2012 / Guan Liwen, Zhu Chunxia, Zhang Huifeng, Xu Huayang -
Dexterous space optimization for robotic belt grinding
Abstract Industrial robots are recently introduced to the belt grinding of complex shaped surfaces to obtain high productive efficiency and constant surface quality. The volume of dexterous grinding workspace is a key factor the grinding robot, in...
2011 / Dong Zhang, Chao Yun, Dezheng Song -
Positioning rub of the aero-engine based on acoustic emission and Mathematical Morphology in noise background
Abstract Aiming at the practical requirement of locating and diagnosis of aero-engine rub fault and the impact of noise on the positioning accuracy, this paper introduces Mathematical Morphology to preprocess the acoustic emission (AE) signals, and...
2011 / Ma Chao, Ma Yuejun, He Tian, Gu Zhengfu -
Energy consumption characterization in precision hard machining using CBN cutting tools2015 / Wit Grzesik, Berend Denkena, Krzysztof Żak, Thilo Grove, Benjamin Bergmann
-
Five-axis rough machining for impellers2009 / Ruolong Qi, Weijun Liu, Hongyou Bian, Lun Li
-
Numerical Investigation of Turbulent Heat Convection from Solid and Longitudinally Perforated Rectangular Fins
Abstract Micro heat sinks are adopted in electronics cooling together with different technologies to enhance the heat transfer process. To improve the cooling performance of heat sink, perforations such as small channels of square and circular cross ...
2013 / Md. Farhad Ismail, M.O. Reza, M.A. Zobaer, Mohammad Ali