Mechanical engineering topic list of research papers
-
In-process Tool Flank Wear Estimation in Machining Gamma-prime Strengthened Alloys Using Kalman Filter
Abstract Monitoring tool wear in machining processes is one of the critical factors in reducing downtime and maximizing profitability and productivity. A worn out tool can deteriorate the surface finish or dimensional accuracy of the part. Due to...
2015 / Farbod Akhavan Niaki, Durul Ulutan, Laine Mears -
Modeling of Cutting Force Distribution on Tool Edge in Turning Process
Abstract Machining process models can be used to predict cutting force/power and further optimize the process parameters. In this work, a mechanistic cutting force model for turning processes is developed. In order to accurately predict cutting...
2015 / Guicai Zhang, Changsheng Guo -
Effects of Solidity Ratio on Performance of OWC Impulse Turbine2015 / Y. Cui, Z. Liu
-
Effect of Fouling, Thermal Barrier Coating Degradation and Film Cooling Holes Blockage on Gas Turbine Engine Creep Life
Abstract Gas turbines are sometimes operated in very hostile conditions due to service exigencies. These environments are characterized by degradation modes such as fouling, thermal barrier coating degradation and blockage of cooling holes which...
2015 / Ebi A. Ogiriki, Yiguang G. Li, Theoklis Nikolaidis, ThankGod E. Isaiah, Gowon Sule -
Output feedback control of pantograph–catenary system with adaptive estimation of catenary parameters2015 / E. Chater, D. Ghani, F. Giri, M. Haloua
-
Study of unsteady cavitation on NACA66 hydrofoil using dynamic cubic nonlinear subgrid-scale model2015 / X. Huang, W. Yang, Z. Liu, Y. Li
-
Modeling bidding decision in engineering field with incomplete information: A static game-based approach2016 / Z.-x. Huang
-
A New fractional derivative for differential equation of fractional order under interval uncertainty2015 / S. Salahshour, A. Ahmadian, F. Ismail, D. Baleanu, N. Senu
-
Optimization of three-loop missile autopilot gain under crossover frequency constraint
Abstract The open-loop crossover frequency is pointed as an important parameter for practical autopilot design. Since different gain designs may achieve the same open-loop crossover frequency, it should be neither considered as a performance...
2015 / M.A. Abd-elatif, Long-jun Qian, Yu-ming Bo -
Axisymmetric stagnation-point flow of a third-grade fluid over a lubricated surface2015 / M. Sajid, M. Ahmad, I. Ahmad, M. Taj, A. Abbasi
-
Forward kinematics solutions of a special six-degree-of-freedom parallel manipulator with three limbs2015 / J. Fu, F. Gao, Y. Pan, H. Du
-
A robust optimization model for green regional logistics network design with uncertainty in future logistics demand2015 / D. Zhang, X. Li, Y. Huang, S. Li, Q. Qian
-
Implementation and performance measurement of a V2X communication system for vehicle and pedestrian safety2016 / Z. Liu, Z. Liu, Z. Meng, X. Yang, L. Pu, et al.
-
Comparative Evaluation of the Vibration Isolation Properties of a Suspension with Different Flywheel Dynamical Absorbers of the Car Body Oscillations
Abstract The article is researching the vibration isolation properties of a flywheel dynamical absorber of the vehicle body oscillations. It is noted that the authors have previously proposed additional flywheel dynamical absorbers with mechanical...
2015 / I.M. Ryabov, K.V. Chernyshov, Pozdeev -
Investigation of Pre-Service Teachers’ Perceptions about Concept of Measurement and Assessment Through Metaphor Analysis
Abstract The aim of this study is to investigate the perceptions of the pre-service elementary and preschool teachers concerning the concept of measurement and assessment through metaphor analysis. For this study, pre-service elementary and...
2012 / Bilge Gok, Ozge Erdogan, Senay Ozen Altinkaynak, Tolga Erdogan -
An overall ablation model of ethylene-propylene-diene monomer based on porous characteristics in char layer2016 / Y. Liu, S. Yang, G. He, J. Li
-
An empirical research on management innovation of high-technology manufacturers2015 / P.-Y. Huang, T.-S. Wu, L.-J. Chen, R. Saito, C.-L. Yu, et al.
-
Study of piezoelectric materials combined with electromagnetic design for bicycle harvesting system2016 / D.-C. Chen, S.-H. Kao, C.-K. Huang
-
Study on a high thrust force bi-double-sided permanent magnet linear synchronous motor2016 / L. Tong, M. Lin
-
Laminar mixed convection boundary layer flow induced by a permeable surface stretched with prescribed skin friction boundary conditions2015 / M. Ali, A. Alabdulkarem