Mechanical engineering topic list of research papers
-
Estimation of vessel collision risk index based on support vector machine2016 / L. Gang, Y. Wang, Y. Sun, L. Zhou, M. Zhang
-
Adaptive Age Replacement Using On-Line Monitoring
Abstract Age replacement is one of the most used maintenance policies based on preventive action in order to prevent the failure of a system. Age replacement means that a system is replaced at failure or at a specified replacement age, whichever...
2017 / Lu Jin, Watalu Yamamoto -
New scheduling rules for a dynamic flexible flow line problem with sequence-dependent setup times2017 / Hamidreza Kia, Seyed Hassan Ghodsypour, Hamid Davoudpour
-
Applied CATIA Secondary Development to Parametric Design of Active Magnetic Bearing2016 / Li Zhang, Meiyun Yu, Yafeng Ren
-
Heat transfer coefficient for flow boiling in an annular mini gap2016 / Sylwia Hożejowska, Tomasz Musiał, Magdalena Piasecka
-
Microstructure stability: Optimisation of 263 Ni-based superalloy2014 / Coraline Crozet, Alexandre Devaux, Denis Béchet
-
An Adaptive WSN Node Tracking Algorithm Based on Rough-set Neural Network
Abstract In order to overcome effects of complex environment and movement on node tracking, and improve tracking precision further, a rough-set neural network-based adaptive tracking algorithm named rough-set adaptive interactive multi-modulus...
2012 / Haobo Wang, Weizheng Ren, Yansong Cui -
Intelligent Gearbox Diagnosis Methods Based on SVM, Wavelet Lifting and RBR2010 / Lixin Gao, Zhiqiang Ren, Wenliang Tang, Huaqing Wang, Peng Chen
-
Dynamic Engineering Multi-criteria Decision Making Model Optimized by Entropy Weight for Evaluating Bid
Abstract Bid evaluation was a pivotal step in the process of bidding. In order to prevent subjective or arbitrary behavior in bid evaluation process, a dynamic engineering Multi-Criteria Decision Making Model optimized by entropy weight was...
2012 / Zhaohong Wang, Wei Zhan -
Grey Synthetical Evaluation of University's Engineering Innovation Ability
Abstract University's engineering innovation ability has an increasingly active effect to guide and support talent cultivation and community service. It plays important role to evaluate university's engineering innovation ability. The paper...
2012 / Zhang Lei -
Novel Concept to Detect an Optimum Thixoforming Condition of Al-Al3Ni Functionally Graded Material by Wavelet Analysis for Online Operation2011 / Noriyoshi Kumazawa, Yasuyoshi Fukui, Daisaku Nara
-
A Spectral Solenoidal-Galerkin Method for Rotating Thermal Convection between Rigid Plates2013 / Cihan Yıldırım, Durmuş Yarımpabuç, Hakan I. Tarman
-
Exterior Trajectory Computation and Modeling of Kinetic Energy Ammunition Based on Constant Terminal Effect
Abstract In order to get the corresponding relationship of target distance and the initial speed of muzzle at the moment of non-lethal blow of constant terminal effect, a certain type of 9mm pillar rubber kinetic energy ammunition is taken as an...
2012 / Xiao-jun Zhai, Xu-dan Dong, Wei Luo -
Application of blend fuels in a diesel engine
Abstract Experimental study has been carried out to analyze engine performance and emissions characteristics for diesel ngine using different blend fuels without any engine modifications. A total of four fuel samples, such as DF (100% iesel fuel),...
2012 / A.M. Liaquat, H.H. Masjuki, M.A. Kalam, M. Varman, M.A. Hazrat, et al. -
Flutter instability prediction techniques for bridge deck sections2003 / I. Robertson, S. J. Sherwin, P. W. Bearman
-
Design of individual re-contouring processes
Abstract The re-contouring process of turbine blades is performed subsequently to the material deposit and restores the shape of the blade. Each process within the process chain has to be adapted to an individual repair case depending on size,...
2017 / Volker Böß, Felix Rust, Berend Denkena, Marc-André Dittrich -
Experimental Studies on Grain Material Extruding Process
Abstract The article presents the results of studies on the processing of crops materials. The method of experimental studies was described. The way of effective preparation was determined - it was the preparation of fodder mixes, combined feed....
2017 / V. Kushnir, N. Gavrilov, S. Kim -
Motion analysis of furniture under seismic excitation using the finite element method2018 / Daigoro Isobe, Takuzo Yamashita, Hiroyuki Tagawa, Mika Kaneko, Toru Takahashi, et al.
-
Implementation of quantum-behaved genetic algorithm in ship local structural optimal design2017 / Guan Guan, Yan Lin
-
Integrated Description of Grinding Wheels Operating Capacity
Abstract The article presents a new regime-tool equipment of grinding operations for short-run environment based on the integrated description of grinding wheels working capacity. Implementing such equipment requires getting the data of the working...
2017 / D.V. Ardashev