Mechanical engineering topic list of research papers
-
Quality Control in Production Processes2016 / Miroslav Prístavka, Martina Kotorová, Radovan Savov
-
Dynamics of droplets moving on a solid surface: Lattice Boltzmann simulations2016 / Alexander Kupershtokh
-
Machining and Metrology of a Chalcogenide Glass Freeform Lens Pair
Abstract Slow tool servo remains a preferred method for ultraprecision manufacture of freeform optics with millimeter-scale departures from an axisymmetric surface. A methodology has been developed for pre-process mapping of, and compensation for,...
2016 / John R. Troutman, Daniel L. Barnhardt, Jason A. Shultz, Joseph D. Owen, Scott DeFisher, et al. -
A model for the grasping analysis of an underactuated finger driven by unextensible tendon2016 / Vincenzo Niola, Cesare Rossi, Sergio Savino
-
Pose measurement model of space cooperative target capture based on zoom vision system2016 / N. Qi, Q. Xia, Y. Guo, J. Chen, Z. Ma
-
Power Generation from Condenser Waste Heat in Coal-fired Thermal Power Plant Using Kalina Cycle
Abstract In any thermal power plant the major energy loss takes place in the condenser through its cooling water system. The objective of the present study is to convert this low grade waste heat from a 500 MWe subcritical coal-fired power plant...
2016 / Goutam Khankari, Jagannath Munda, Sujit Karmakar -
Dynamic analysis of a cable-stayed bridge subjected to a continuous sequence of moving forces2016 / M. Song, D. Cao, W. Zhu
-
Decentralized Control Performances of an Experimental Web Handling System2012 / Nicola Ivan, Takeshi Nishida, Tetsuzo Sakamoto
-
Design, Implementation and Control of a Fish Robot with Undulating Fins2012 / Mohsen Siahmansouri, Ahmad Ghanbari, Mir Masoud Seyyed Fakhrabadi
-
Research on the Properties of Resin Bond Wheel Cured by Ultraviolet Light
Abstract The Ultraviolet (UV) cured resin bond abrasive tools have been studied and proved to have substantial advantages over conventional abrasive tools. The properties of abrasive-mixed resin would affect the tool performance and accordingly the...
2016 / Qiuyun Huang, Lei Guo, Ioan D. Marinescu -
An improved particle filtering algorithm for aircraft engine gas-path fault diagnosis2016 / Q. Wang, J. Huang, F. Lu
-
Voltage Fluctuation in a Supercapacitor During a High-g Impact2016 / Keren Dai, Xiaofeng Wang, Yajiang Yin, Chenglong Hao, Zheng You
-
Optimization on Turning Parameters of 15-5PH Stainless Steel Using Taguchi Based Grey Approach and Topsis2016 / D. Palanisamy, P. Senthil
-
Innovative approaches for controlling the material flow in sheet-bulk metal forming processes2016 / Marion Merklein, Michael Lechner, Daniel Gröbel, Maria Löffler, Thomas Schneider, et al.
-
The Effects of Packaging on Collision Energy Absorption of Automotive Seat Headrest2016 / Minggang Chen, Lei Zhou, Zhenghua Meng, Xuebing Wei, Hui Wang
-
Study on coupled shock absorber system using four electromagnetic dampers2016 / Y Fukumori, R Hayashi, H Okano, Y Suda, K Nakano
-
Tool Rake Face Temperature Distribution When Machining Ti6Al4V and Inconel 718
Abstract This paper is concerned with experimentally obtained full field temperature distributions at the interface between chip and tool – the tool rake face – for the machining of Ti6Al4V and Inconel 718. As part of the work presented herein,...
2016 / Jean Carlos Garcia-Gonzalez, Wilfredo Moscoso-Kingsley, Viswanathan Madhavan -
Modification de la morphologie du graphite pour l'amélioration de la durée de vie des disques de frein poids lourd2013 / M. Collignon, A.-L. Cristol, Y. Desplanques, P. Dufrénoy, G. Regheere, et al.
-
A Solution to Cooperative Area Coverage Surveillance for a Swarm of MAVs2013 / Wang Zheng-jie, Li Wei
-
Possibilities of Reclamation Microwave-Hardened Molding Sands with Water Glass2014 / M. Stachowicz, K. Granat