Mechanical engineering topic list of research papers
-
Kinematic Analysis of Cpm Machine Supporting to Rehabilitation Process after Surgical Knee Arthroscopy and Arthroplasty2015 / R. Trochimczuk, T. Kuźmierowski
-
Experimental and numerical studies on super-cavitating flow of axisymmetric cavitators2015 / Byoung-Kwon Ahn, Chang-Sup Lee, Hyoung-Tae Kim
-
The Design and Engineering of the 187 km Khouribga to Jorf Lasfar Phosphate Slurry Pipeline
Abstract The Jorf Lasfar phosphate slurry pipeline in Morocco, commissioned in April 2014, is one of the world's largest slurry pipelines. The pipeline receives phosphate ore from the El Halassa, MEA and Daoui wash plants situated up to 22km away....
2016 / Julian Rusconi, Anis Lakhouaja, Mustafa Kopuz -
Research of Automatic Progress Report Generation for Railway Construction Projects in China2015 / Q. Li, R. Liu, Q. Sun, F. Wang
-
Modeling and experiments of a laminated magnetostrictive cantilever beam2015 / Q. Cao, D. Chen, Q. Lu, G. Tang, J. Yan, et al.
-
Positioning method of a cylindrical cutter for ruled surface machining based on minimizing one-sided Hausdorff distance
Abstract Motivated by the definition of the machining errors induced by tool path planning methods, a mapping curve of the tool axis of a cylindrical cutter is constructed on the tool surface. The mapping curve is a typical one that can be used to...
2015 / Lixin Cao, Lei Dong -
Cutter-workpiece engagement determination for general milling using triangle mesh modeling
Abstract Cutter-workpiece engagement (CWE) is the instantaneous contact geometry between the cutter and the in-process workpiece during machining. It plays an important role in machining process simulation and directly affects the calculation of the ...
2015 / Xun Gong, Hsi-Yung Feng -
Hydrodynamic characteristics for flow around wavy wings with different wave lengths2015 / Mi Jeong Kim, Hyun Sik Yoon, Jae Hwan Jung, Ho Hwan Chun, Dong Woo Park
-
Parametric geometric model and shape optimization of an underwater glider with blended-wing-body2015 / Chunya Sun, Baowei Song, Peng Wang
-
Improvement of biodiesel methanol blends performance in a variable compression ratio engine using response surface methodology
Abstract The main objective of this work was to improve the performance of biodiesel–methanol blends in a VCR engine by using optimized engine parameters. For optimization of the engine, operational parameters such as compression ratio, fuel blend,...
2016 / Y. Datta Bharadwaz, B. Govinda Rao, V. Dharma Rao, C. Anusha -
Analysis of a micro piezoelectric vibration energy harvester by nonlocal elasticity theory2016 / H. Chen, S. Jiang, L. Dai, H. Hu
-
Evaluation of Effects of Warning Sign Position on Driving Behavior in Horizontal Sharp Curves2015 / X.-h. Zhao, L.-h. Huang, W. Guan, J. Rong
-
Numerical Analysis of a Hygrothermal Environment During Hot and Humid Seasons Considering Room Hygroscopicity and Air Conditioner Driving Mode
Abstract This study aims to investigate the hygrothermal environment by estimating the room air conditioner (RAC) heat load in a room with hygroscopic materials. The sensible and latent heat capacity and the water retention quantity in the RAC...
2015 / Daisuke Ogura, Yusuke Tatsumi, Takashi Ogino, Hisashi Miura -
A new speed optimization algorithm with application in pickling and rolling line2016 / X. Zhu, L. Wang, D. Zhang, Q. Jiao
-
Dynamics Modeling and Analysis of Local Fault of Rolling Element Bearing2015 / L. Cui, X. Chen, S. Chen
-
In-cylinder Combustion Process Analysis of a Small Compression Ignition Engine Fuelled with Both Blended and Pure Biofuel
Abstract The aim of this study is to investigate the combustion process and pollutant formation in a small compression ignition engine for quadricycles. The engine is a three-cylinder, 1028 cc, with a CR injection system. It was designed to meet...
2015 / A. Magno, E. Mancaruso, B.M. Vaglieco -
Modeling the Gas-Solid Flow in Calcining Furnace2011 / Haiyan Luo
-
Anti-disturbance inverse optimal control for spacecraft position and attitude maneuvers with input saturation2016 / C. Pukdeboon
-
Three-dimensional contact analysis of coupled surfaces by a novel contact transformation method based on localized Lagrange multipliers2016 / Y.-T. Lin, J. S.-S. Wu, Y.-L. Lai
-
Uncertainty analysis of torque-induced bending deformations in ball screw systems2015 / G. Xiangsheng, W. Min, L. Qi, Z. Tao