Mechanical engineering topic list of research papers
-
Multi-objective robust optimization method for the modified epoxy resin sheet molding compounds of the impeller
Abstract A kind of modified epoxy resin sheet molding compounds of the impeller has been designed. Through the test, the non-metal impeller has a better environmental aging performance, but must do the waterproof processing design. In order to...
2016 / Xiaozhang Qu, Guiping Liu, Shuyong Duan, Jichu Yang -
Numerical Simulation of Machining Nickel-Based Alloys
Abstract The phenomenological models for material flow stress and fracture, typically used in the Finite Element simulations of machining Nickel-based alloys, are often deemed to represent only certain metallurgical material states. In contrast,...
2013 / Antonio Del Prete, Luigino Filice, Domenico Umbrello -
Multifunction Numerical Control Solution for Hybrid Mechanic and Laser Machine Tool
Abstract Hybrid and also multitasking machine tools are equipped with a multifunction NC system. The popularity of multitasking machines is growing because of the decrease of the necessity to use manufacturing equipment and the reduction of the...
2012 / Georgi M. Martinov, Aleksandr B. Ljubimov, Anton S. Grigoriev, Lilija I. Martinova -
Computational Study on the Influence of jet on Reduction of Drag Over Cone Flare Bodies in Hypersonic Turbulent Flow
Abstract Recently, Nhypersonic research activities around the universe have been in major focus because of the milestone developments in hypersonic reentry vehicles, orbital transfer vehicles, reusable launch vehicles and space recovery experimental ...
2012 / S. Aruna, S.P. Anjalidevi -
Study of Railway Freight Vehicle Body's Dynamic Model Based on Goods Loading Technical Standards
Abstract The gravity center position of the loaded car-body is always constant during the dynamic analysis currently. To enhance vehicle dynamic analysis for goods transportation, multi-body system dynamics and vehicle-track coupling dynamics are...
2012 / Chen Chao, Han Mei, Han Yanhui -
Modeling of surface texturing in hydrodynamic lubrication2013 / Izhak Etsion
-
Measurement of aerodynamic forces and flow field of a soccer ball in a wind tunnel for knuckle effect
Abstract Wind tunnel experiments have been conducted to investigate the knuckle effect of a soccer ball. In the present experiment, we measured the surface pressure of a ball as well as aerodynamic forces, and made tuft grid visualization to...
2010 / Masahide Murakami, Masakazu Kondoh, Yutaka Iwai, Kazuya Seo -
Study on the Saturation Flow Rate and Its Influence Factors at Signalized Intersections in China
Abstract The objective of this paper is to report some findings on the saturation flow rates at signalized intersection in China. Based on the surveyed data and codes of traffic planning and design for urban roads, the base conditions are determined ...
2011 / Chang-qiao Shao, Jian Rong, Xiao-ming Liu -
Experimental Study on Decomposition of Desin Oriented Knowledge Work Process in Modern Manufacturing Context
Abstract In order to study the decomposition of design oriented knowledge work process and test a Pareto hypothesis on design activities, an experiment was conducted on the improving design of a gear drive by concurrent verbalization method. Design...
2011 / Li Fa-quan, Yi Shu-ping, Tang Xin-kui -
Fault Diagnosis Method Research of Aircraft Ignition System based on Waveform Image Matching
Abstract This paper focuses on aircraft engine ignition system. Fault characteristic database containing fault waveforms of different fault types are obtained by many experiments. The outputting ignition waveform is made waveform image matching with ...
2011 / Xudong Shi, Gangqiang Ren, Jianli Li, Shengbiao Zhang -
Model-based expert system to automatically adapt milling forces in Pareto optimal multi-objective working points
Abstract The objective of this paper is to present an open and modular expert rule-based system in order to automatically select cutting parameters in milling operations. The knowledge base of the system presents considerations of stability, machine ...
2012 / Luis Rubio, Manuel De la Sen, Andrew P. Longstaff, Simon Fletcher -
A Macroscopic Node Model Related to Capacity Drop
Abstract The automobile traffic congestion annually generates an estimated cost of several million euros for such a urban area as a European capital. At the origin of this congestion, the capacity drop is a well-known phenomenon which still remains...
2012 / Thomas Monamy, Habib Haj-Salem, Jean-Patrick Lebacque -
Performance of Single Cylinder Spark Ignition Engine Fueled by LPG
Abstract This paper analyze the characteristics of single cylinder SI ICE fueled by LPG. In particular, torque and engine speed were examined with using the universal dynamometer in WOT condition under stable condition. In additional the fuel...
2013 / M.Y. Sulaiman, M.R. Ayob, I. Meran -
A Stratified Acoustic Model Accounting for Phase Shifts for Underwater Acoustic Networks2013 / Ping Wang, Lin Zhang, Victor Li
-
Influence of Boundary Conditions and Defects on the Buckling Behavior of SWCNTs via a Structural Mechanics Approach2011 / Vali Parvaneh, Mahmoud Shariati, Hamid Torabi, Amir Masood Majd Sabeti
-
Cylindrical Magnetorheological Fluid Variable Transmission Controlled by Shape-Memory Alloy2012 / Song Chen, Kailin Jian, Xianghe Peng
-
Vision-Based Traffic Data Collection Sensor for Automotive Applications2010 / David F. Llorca, Sergio Sánchez, Manuel Ocaña, Miguel. A. Sotelo
-
A More Reliable Method for Monitoring the Condition of Three-Phase Induction Motors Based on Their Vibrations2012 / R. Shnibha, A. Albarbar, A. Abouhnik, G. Ibrahim
-
Determination of the Real Loss of Power for a Condensing and a Backpressure Turbine by Means of Second Law Analysis2009 / Henrik Holmberg, Pekka Ruohonen, Pekka Ahtila
-
Metropolis Parking Problems and Management Planning Solutions for Traffic Operation Effectiveness2012 / Yuejun Liu, Wuhong Wang, Chengxi Ding, Hongwei Guo, Weiwei Guo, et al.