Mechanical engineering topic list of research papers
-
A Novel Human Motion Tracking Approach Based on a Wireless Sensor Network2013 / Sen Zhang, Wendong Xiao, Jun Gong, Yixin Yin
-
Design of Autonomous Underwater Vehicle2012 / Tadahiro Hyakudome
-
Evaluation of static and dynamic postural stability in young, elderly and with vision loss women2014 / Ida Wiszomirska, Katarzyna Kaczmarczyk, Agnieszka Zdrodowska, Michalina Błażkiewicz, Lidia Ilnicka, et al.
-
Surface Roughness Effects on Vortex Torque of Air Supported Gyroscope
Abstract In order to improve the drift precision of air supported gyroscope, effects of surface roughness magnitude and direction on vortex torque of air supported gyroscope are studied. Based on Christensen's rough surface stochastic model and...
2011 / Yingchun LIANG, Jingshi LIU, Yazhou SUN, Lihua LU -
Modeling and Simulating Dynamics of Missiles with Deflectable Nose Control
Abstract This article investigates the dynamic characteristics of deflectable nose missiles with rotary single-channel control. After introduction of effective attack and sideslip angles as well as quasi-body coordinates based on the spin...
2009 / Gao Yuan, Gu Liangxian, Pan Lei -
Study on added resistance of a tanker in head waves at different drafts
Abstract In this study, added resistance was evaluated experimentally and numerically in four draft conditions: full load, ballast, and two intermediate conditions between the full load and ballast conditions. A series of towing-tank experiments for ...
2015 / Dong-Min Park, Yonghwan Kim, Min-Guk Seo, Jaehoon Lee -
High-frequency Compensation of Dynamic Distortions in Micromachining Force Measurements
Abstract In this paper, we present a comprehensive technique to obtain accurate three-dimensional (3D) micromachining forces for frequency bandwidths up to 25kHz. The capability to precisely measure cutting forces is central to gaining fundamental...
2015 / Emrullah Korkmaz, B. Arda Gozen, Bekir Bediz, O. Burak Ozdoganlar -
Rotation Properties of Feather Shuttlecocks in Motion
Abstract Feather shuttlecocks are chiral bodies whose rotation properties, such as trajectory and velocity, affect their motion states. This study proposes an experimental method to simulate the rotation properties of shuttlecocks. The effect of...
2014 / Xiaoshan Cao, Jianmin Qiu, Xing Zhang, Junping Shi -
Blade tip timing vibration monitoring method based on fiber Bragg grating2014 / Fei Wu, Lei Liang, Junya Xing, Lin Wang, Lang Jia
-
PARADIGMshift: A Method for Feasibility Studies of New Systems
Abstract A conceptual design method to perform feasibility studies for new technical systems is presented. The method enforces a formal yet pragmatic definition of the problem domain, the solution candidates, and the way of candidate selection for...
2015 / Holger Schumann, Axel Berres, Sönke Escher, Tilman Stehr -
Mixing Effectiveness Study in Scramjet Combustion
Abstract Scramjet propulsion provides promising opportunities for high-speed transportation and cost reduction for satellite and spacecraft launch operations. This paper provides some selected numerical examples among the abundance of available test ...
2014 / Y.S. Chen, Y.Y. Lian, T.H. Chou, Alfred Lai, J.S. Wu -
Rotor Vibratory Load Prediction Based on Generalized Forces
Abstract Three rigid-body motion DOFs are introduced for the motion of the flap, lag hinge and pitch bearing. The rotor blade is discretized using a five-nodes, 15 DOFs beam finite element. The dynamic coupling effect between the rigid motion of the ...
2011 / Hao-wen Wang, Zheng Gao -
Research on Fatigue Curves for Pre-corroded Aircraft Structures
Abstract To quantitatively evaluate the effects of corrosion during grounding on fatigue life of aircraft structures, a new power equation is proposed using two variable linear regression method. That the slope is a constant and the logarithmic...
2011 / Zhong-bo WANG, Wen-ting LIU, Xiao-fan HE -
Behavioral Characteristics of Pedestrian Flow on Stairway at Railway Station
Abstract India has witnessed higher level of mobility at urban as well as intercity segments due to improvisation of socio-economic conditions in last two decades. Even though, majority of the intercity travel is made by road based modes, number of...
2013 / Jiten Shah, G.J. Joshi, Purnima Parida -
An Investigation into CO2 Laser Trimming of CFRP and GFRP Composites
Abstract The paper outlines results for an investigation of CO2 laser trimming of fibre reinforced plastic (FRP) composites. Process variables include cutting speed, laser beam power, gas pressure and workpiece material. These have been evaluated...
2013 / Islam Shyha -
A Knowledge based Application for Industrialization Design
Abstract After being designed, a product has to be manufactured, which means converting concepts and information into a real, physical object. This requires a big amount of resources and a careful planning. The product manufacturing must be designed ...
2013 / A. Gómez, F. Mas, J.L. Menéndez, J. Ríos -
Vehicle Continuous Collision Accident Reconstruction System Development
Abstract In order to solve vehicle continuous collision accident simulation reconstruction problem, through study of vehicle continuous collision accident collision mechanism, using trajectory preview iterative algorithm, trace inspection...
2013 / Wei Lang, Gong Biao, Chen Tao -
Assessment Tool of Course Learning Outcomes for Mechanical Design of Process Equipment
Abstract Elements of learning outcomes (CO) are one of the factors that affect in the context of results-based learning (OBE) or Outcome Based Education (OBE). Based on accreditation by the Engineering Accreditation Council (EAC) at the Department...
2013 / Norliza Abd Rahman, Siti Rozaimah Sheikh Abdullah -
Chaotic Extension Neural Network Theory-Based XXY Stage Collision Fault Detection Using a Single Accelerometer Sensor2014 / Chin-Tsung Hsieh, Her-Terng Yau, Shang-Yi Wu, Huo-Cheng Lin
-
TCPs, WUSs, and WINDs: families of transcription factors that regulate shoot meristem formation, stem cell maintenance, and somatic cell differentiation2014 / Miho Ikeda, Masaru Ohme-Takagi