Mechanical engineering topic list of research papers
-
Prediction of oil-film thickness and shape in elliptical point contacts under combined rolling and sliding motion2002 / D Jalali-Vahid, H Rahnejat, R Gohar, Z M Jin
-
Analysis of Sigmoid Functionally Graded Material (S-FGM) Nanoscale Plates Using the Nonlocal Elasticity Theory2013 / Woo-Young Jung, Sung-Cheon Han
-
Lock-In Amplifier Technology in Laser Gyroscope North Finder of Constant Rate Biasing2013 / Bin Wang, Wei Zhang, Zhanqing Wang, Peihao Zhu
-
Numerical Simulation of Tower Rotor Interaction for Downwind Wind Turbine2010 / Isam Janajreh, Ilham Talab, Jill Macpherson
-
Quadratic and cubic eddy-viscosity models in turbulent supercavitating flow computation
Abstract Quadratic and cubic non-linear eddy-viscosity turbulence models (NLEVM) with low Reynolds number (Re) correction were presented to provide better description of anisotropic turbulence stresses in the numerical prediction of supercavitating...
2011 / Ying Chen, Chuanjing Lu, Xin Chen -
The Effect of Nanofluid Volume Concentration on Heat Transfer and Friction Factor inside a Horizontal Tube2013 / Adnan M. Hussein, K. V. Sharma, R. A. Bakar, K. Kadirgama
-
Fast simulation of flexible multibody dynamics with electric-hydraulic drive system
Abstract Hardware in the loop simulation (HILS) has been investigated in the field of the multibody dynamics (MBD), which combined the MBD simulation with the actual mechanical system. The fast simulation is necessary for the HILS system in order to ...
2013 / Etsujiro Imanishi, Takao Nanjo -
Torsional Stiffness Effects on the Dynamic Stability of a Horizontal Axis Wind Turbine Blade2013 / Min-Soo Jeong, In Lee, Seung-Jae Yoo, Kwang-Choon Park
-
Heat Flux in Cutting: Importance, Simulation and Validation
Abstract The trends of machining difficult-to-machine materials and of dry machining or MQL lead to high temperatures in the cutting zone and increase the importance of thermal factors in the machining process. Besides amplified thermal tool loading ...
2015 / M. Putz, G. Schmidt, U. Semmler, M. Dix, M. Bräunig, et al. -
Investigation on the corrosion behavior of physical vapor deposition coated high speed steel2015 / R. R. R. Malarvannan, T. Moorthy, S. Sathish, P. Hariharan
-
Active control for performance enhancement of electrically controlled rotor
Abstract Electrically controlled rotor (ECR) system has the potential to enhance the rotor performance by applying higher harmonic flap inputs. In order to explore the feasibility and effectiveness for ECR performance enhancement using closed-loop...
2015 / Yang Lu, Chao Wang -
Two Dimensional Functionally Graded Material Finite Thick Hollow Cylinder Axisymmetric Vibration Mode Shapes Analysis Based on Exact Elasticity Theory2015 / Masoud Asgari
-
Optimization Based on Convergence Velocity and Reliability for Hydraulic Servo System
Abstract This article presents an optimal hybrid fuzzy proportion integral derivative (HFPID) controller based on combination of proportion integral derivative (PID) and fuzzy controllers, by which the parameters could be evaluated by global...
2009 / Muhammad Babar Nazir, Wang Shaoping -
Establishing Manufacturing Effort Models to be Used in Optimization of Extruded Aluminum Profiles under Structural and Manufacturing Criteria
Abstract As the manufacturing effort is often one of the major drivers in structural design, the paper discusses the development and application of a manufacturing effort model (MEM) for aluminum extrusion, representi g fuzzy expert knowledge on the ...
2014 / R. Wehrle, H. Baier -
Effect of Diffusively Shaped Holes on the Turbulent Flow Field of a Film Cooling Plate
Abstract The gas turbine blades with diffusion film cooling holes are newly developed blade structures in the hydrogen combustion gas turbine, which has an extremely high inlet gas temperature (1700°C). The Fluid Machinery Laboratory of Nagoya...
2011 / Hong-Hui SHI, Kenji Kiriyama, Motoyuki Itoh -
Conceptual Design Optimization of Fighter Trainer Aircraft with Double-delta Wing Configuration
Abstract Compared with a delta wing aircraft, the double-delta wing configuration has better aerodynamic performance at high angles of attack. An operational analysis was introduced as a method for evaluating training effectiveness of trainer...
2011 / Jun HUANG, M.I. Mostafa, Zhe WU -
Variable Impedance Actuation Meso-micro Physical Models and Rotation Link Using Biphasic Media
Abstract Variable impedance actuators (VIAs) are being designed and implemented because of their ability to minimize large forces due to shocks, to safely interact with the user, and their ability to store and release energy in passive elastic...
2013 / Bo Han, Matteo Zoppi, Rezia Molfino -
2D CFD Modeling of H-Darrieus Wind Turbines Using a Transition Turbulence Model
Abstract In the present paper, the authors describe the strategy to develop a 2D CFD model of H-Darrieus Wind Turbines. The model was implemented in ANSYS Fluent solver to predict wind turbines performance and optimize its geometry. As the RANS...
2014 / Rosario Lanzafame, Stefano Mauro, Michele Messina -
The Basis of an Industry-standard Aerodynamic Computation and its Theoretical Basis with Inferences and Applications
Abstract “The PNS method is in very widespread use; indeed, it forms the basis of an industry-standard computer program, which is used by virtually all major aerodynamics laboratories and companies.”(John D. Anderson Jr. American aerodynamicist...
2014 / Z. Gao -
Nonlinear Adaptive Robust Force Control of Hydraulic Load Simulator
Abstract This paper deals with the high performance force control of hydraulic load simulator. Many previous works for hydraulic force control are based on their linearization equations, but hydraulic inherent nonlinear properties and uncertainties...
2012 / Jianyong YAO, Zongxia JIAO, Bin YAO, Yaoxing SHANG, Wenbin DONG