Mechanical engineering topic list of research papers
-
The Effects of Inlet Box Aerodynamics on the Mechanical Performance of a Variable Pitch in Motion Fan2012 / A. G. Sheard
-
Acoustic Pressure Waves in Vibrating 3-D Laminated Beam-Plate Enclosures2010 / Charles A. Osheku, Vincent O. S. Olunloyo, O. Damisa, Theddeus T. Akano
-
An Experimental Investigation into the Effect of Flap Angles for a Piezo-Driven Wing2013 / Anthony DeLuca, Mark Reeder, Richard Cobb
-
Numerical Simulations and Design Optimization of the PHT Loop of Natural Circulation BWR2008 / G. V. Durga Prasad, G. Gopa Kishor, Manmohan Pandey, Uday S. Dixit
-
Optical interferometric studies of a confined liquid free surface: meniscus‐effect compensation and time evolution of the surface2006 / Lea V. Bourimborde
-
An overview on nonlinear porous flow in low permeability porous media
Abstract This paper gives an overview on nonlinear porous flow in low permeability porous media, reveals the microscopic mechanisms of flows, and clarifies properties of porous flow fluids. It shows that, deviating from Darcy's linear law, the...
2013 / Yanzhang Huang, Zhengming Yang, Ying He, Xuewu Wang -
Hysteresis Nonlinearity Identification Using New Preisach Model-Based Artificial Neural Network Approach2011 / Mohammad Reza Zakerzadeh, Mohsen Firouzi, Hassan Sayyaadi, Saeed Bagheri Shouraki
-
Optimization of Sensing and Feedback Control for Vibration/Flutter of Rotating Disk by PZT Actuators via Air Coupled Pressure2011 / Tianhong Yan, Xinsheng Xu, Jianqiang Han, Rongming Lin, Bingfeng Ju, et al.
-
Dynamic Network Design Problem under Demand Uncertainty: An Adjustable Robust Optimization Approach2014 / Hua Sun, Ziyou Gao, Fangxia Zhao
-
A two-scale contact model for collisions between blocks in CDEM2015 / ShiHai Li, DeHong Tang, Jie Wang
-
Energy Efficient Machining with Optimized Coolant Lubrication Flow Rates
Abstract Nowadays, reducing the energy consumption is an important step to optimize machine tools. In general use, high pressure pumps of inner cooling lubricant supply are dominant energy consumers in machine tools and thus offer great possible...
2014 / Berend Denkena, Patrick Helmecke, Lars Hülsemeyer -
Theoretical and experimental research on the influence of multiple piezoelectric effects on physical parameters of piezoelectric actuator2015 / Liping Shi, Haimin Zhou, Jie Huang, Jiliang Tan
-
Abnormal Shape Mould Winding
Abstract A theory of composite material patch winding is proposed to determine the winding trajectory with a meshed data model. Two different conditions are considered in this study. One is Bridge condition on the concave surface and the other is...
2007 / Fu Hongya, Wang Xianfeng, Han Zhenyu, Fu Yunzhong -
Slicing Recognition of Aircraft Integral Panel Generalized Pocket
Abstract To automatically obtain a machining area in numerical control (NC) programming, a data model of generalized pocket is established by analyzing aircraft integral panel characteristics, and a feature recognition approach is proposed. First,...
2008 / Yu Fangfang, Du Baorui, Ren Wenjie, Zheng Guolei, Chu Hongzhen -
Control and navigation system for a fixed-wing unmanned aerial vehicle2014 / Ruiyong Zhai, Zhaoying Zhou, Wendong Zhang, Shengbo Sang, Pengwei Li
-
Fast Low-fidelity Wing Aerodynamics Model for Surrogate-based Shape Optimization
Abstract Variable-fidelity optimization (VFO) can be efficient in terms of the computational cost when compared with traditional approaches, such as gradient-based methods with adjoint sensitivity information. In variable-fidelity methods, the...
2014 / Leifur Leifsson, Slawomir Koziel, Adrian Bekasiewicz -
A Machining Test to Evaluate Geometric Errors of Five-axis Machine Tools with its Application to Thermal Deformation Test
Abstract This paper proposes a machining test to calibrate position-dependent geometric errors, or “error map,” of rotary axes of a five-axis machine tool. At given sets of angular positions of rotary axes, a simple straight side-cutting using a...
2014 / Soichi Ibaraki, Yusuke Ota -
Review of high efficiency and clean reactivity controlled compression ignition (RCCI) combustion in internal combustion engines
Abstract This article covers key and representative developments in the area of high efficiency and clean internal combustion engines. The main objective is to highlight recent efforts to improve (IC) engine fuel efficiency and combustion. Rising...
2014 / Rolf D. Reitz, Ganesh Duraisamy -
Predictive Modeling for Tool Deflection and Part Distortion of Large Machined Components
Abstract Machined monolithic components provide the foundation for modern aircraft structures requiring high performance designs in terms of weight, strength, and fatigue properties. Part distortions arising from machining-induced stresses and tool...
2013 / S. Jayanti, D. Ren, E. Erickson, S. Usui, T. Marusich, et al. -
The Aerodynamic behavioral Study of Two Wing's Wake Flow in Tandem Arrangement
Abstract This paper is aimed to study the aerodynamic properties and flow structures of flow field between two wings in tandem arrangement, including the experiments of force and velocity measurement in the wind tunnel. From the hot-wire velocity...
2014 / H.Y. Chou, Y.C. Liu, F.B. Hsiao