Materials engineering topic list of research papers
-
Array of Chromium Doped Nanostructured TiO2 Metal Oxide Gas Sensors
Abstract The aim of this work was to design and test an array of sensors based on nanocrystalline of TiO2:Cr (0.1–10 at.% Cr) for reliable and reproducible gas detection. Thermally modulated responses of metal oxide nanosensors to hydrogen, methane...
2014 / P. Gwizdz, M. Radecka, K. Zakrzewska -
Solvothermal synthesis of NiAl double hydroxide microspheres on a nickel foam-graphene as an electrode material for pseudo-capacitors2014 / Damilola Momodu, Abdulhakeem Bello, Julien Dangbegnon, Farshad Barzeger, Fatimeh Taghizadeh, et al.
-
Real-Time Gate Reassignment Based on Flight Delay Feature in Hub Airport2013 / Huawei Wang, Yuxiao Luo, Zhijian Shi
-
Compression Deformation Behavior of AZ81 Magnesium Alloy at Elevated Temperatures2014 / Xiaoping Luo, Shue Dang, Li Kang
-
Fatigue crack growth in a nickel-based superalloy at elevated temperature - experimental studies, viscoplasticity modelling and XFEM predictions2015 / Farukh Farukh, Liguo Zhao, Rong Jiang, Philippa Reed, Daniela Proprentner, et al.
-
Static Analysis of Electrostatically Actuated Micro Cantilever Beam
Abstract Electrostatically actuated micro devices experience a fundamental limit on their stable travel range due to a phenomenon called as the pull-in Instability. Accurate determination of pull-in parameters (pull-in displacement and pull-in...
2013 / Anchit J. Kaneria, D.S. Sharma, R.R. Trivedi -
New primitive ichthyosaurian (Reptilia, Diapsida) from the Middle Triassic of Panxian, Guizhou, southwestern China and its position in the Triassic biotic recovery
Abstract A new primitive ichthyopterygian Xinminosaurus catactes gen. et. sp. nov. is erected based on a complete skeleton from the Middle Triassic Upper Member of the Guanling Formation at Panxian, Guizhou, southwestern China. It has a suite of...
2008 / Dayong Jiang, Ryosuke Motani, Weicheng Hao, Lars Schmitz, Olivier Rieppel, et al. -
Study on microstructure and catalytic performance of B, C, N co-dopped TiO2
Abstract BCN–TiO2 was prepared by doping TiO2 with graphite-like structure BCN, and characterised by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) scanning electron microscope (SEM) and visible-light photocatalysis visible-light...
2012 / Ling Zhang, Ling Li, Zonggang Mou, Xifeng Li -
New Method of Mix Design for Self-Compacting Concrete Based on Material Characteristics
Abstract According to the definition of specific surface, a convenient method was presented to estimate the specific surface of aggregate. Two new concepts, surplus thick-ness of sand and thickness of paste around aggregate, were introduced in the...
2012 / Fangxian Li, Jiangxiong Wei, Jingping Wang, Xinyi Pei, Guotao Wang, et al. -
Modified Rejection Ratio for Multiple Load Cases Evolutionary Structural Optimization
Abstract At present, for topological optimization in multiple load cases, many researchers use directly traditional Evolutionary Structural Optimization (ESO) method to get respectively the inefficient material set that should be removed in each...
2012 / Xing-guo Hu, He-ming Cheng, Yan Tao -
BiFeO3-Based Nanoceramics Prepared by Spark Plasma Sintering
Abstract BiFeO3-based nanopowders were prepared via a sol-gel method, in which the gel (with metal-nitrate, maleic acid and water used as raw materials) was sintered at 650°C for 2 hours. The aggregation of nanopowders was destroyed by high energy...
2012 / Qinghui Jiang, Dongzhi Wang, Futian Liu -
Effect of microstructures on fatigue property of TC18 titanium alloy with equal strength
Abstract Mechanical properties including fatigue property and microhardness of pre and post fatiguing, have been investigated for four different microstructures (near bi-model, lamellar and basketweave) of TC18 titanium alloys. The correlation of...
2012 / Chenglong Shi, Guoqing Wu, Aixue Sha, Huiren Jiang -
Solidification structure analysis of cold crucible directionally solidified Nb-Si based alloy
Abstract The water cooled copper crucible directional solidification was used to prepare Nb-12Si-24Ti-4Cr-4Al-2Hf(at.%) alloy in this paper. An obvious growth trend of directional solidification in the stably solidified area of the sample was...
2012 / Yuncheng Yan, Hongsheng Ding, Jinxia Song -
Effects of Al doping on phase transition and thermoelectric properties of β–Zn4Sb3
Abstract In this paper, Al-doped Zn4Sb3 compounds (Zn1-xAlx)4Sb3 (x=0,0.0025,0.005) were prepared by using the method consisting of high-temperature melting, rapid cooling and hot-pressing(300°C) under a high pressure. (Zn1-xAlx)4Sb3 has been...
2012 / Qingqing Wang, Xiaoying Qin -
Error Feedback Controller for Autonomous Space Teleoperation
Abstract As autonomous teleoperation control becomes the new hotspot for space teleoperation, interesting control challenges including large variant timedelay, model error and various disturbances are presented. Facing these practical challenges,...
2012 / Hu Tianjian, Huang Xuexiang, Tan Qian, Huang Jianyu -
The Design of Microcomputer Principle Experiment Device
Abstract The pulse generating circuit, frequency division circuit, decoding circuit, signal driving circuit and DMA circuit are designed in the microcomputer principle experiment device with the FPGA part, It is realized that the interface is...
2012 / Xuepeng Liu, Dongmei Zhao -
Violating traffic light behavior in the Biham-Middleton-Levine traffic flow model
Abstract Effects of violating traffic light behavior are studied in this paper based on the cellular automata (CA) model proposed by Biham-Middleton-Levine (BML). We define two kinds of drivers: one obeys the traffic light rule, the other ignores...
2012 / Zhong-Jun Ding, Xiao-Yan Sun, Bing-Hong Wang -
Use of multi-wall carbon nanotubes as an absorber in a thermal detector
Abstract A thermopile based detector array has advantages when used for an infrared (IR) micro-spectrometer, as compared to an array of photon detector, such as flat spectral response and uncooled operation. A thermal detector requires a good...
2012 / H. Wu, S. Vollebregt, A. Emadi, G. de Graaf, R. Ishihara, et al. -
Materials Selection for Green Buildings: which Tools for Engineers and Architects?
Abstract The selection of building materials plays a key role in the achievement of the ‘Green Buildings’ target and is performed both at an early stage of the design process (when general and strategic choices concerning the building are made) and...
2011 / Elisa Franzoni -
Inert Technology Application for Fire Treatment in Dead End Referred to High Gassy Mine
Abstract The fire accident of the return airway for 7th mining area in TaoYi occurred in the middle section of the dead-end roadway referred to high gassy mine, which is difficult to handle and the technology request is high. Based on analysis of...
2011 / Sun Chundong, Liz hantao, Chen Li, Guo Xinhe