Materials engineering topic list of research papers
-
Study on the Aggregation of Fluorinated Surfactant FC-134 on the Surface of DNA
Abstract The aggregation of perfluoroalkylsulfonyl quaternary ammonium iodide (FC134) on DNA was studied by spectral method. The results showed that it is a good way to determine DNA with FC134 by RLS method. This method is reliable, precise and...
2012 / Ling Li, Quan Pa, Zushun Xu, Gongwu Song -
Synthesis and electrical properties of (Pb,Co)Sr2(Y,Ca)Cu2Oz
Abstract One of related materials to high-temperature superconductors (HTSC's) with nominal compositions of (Pb0.5Co0.5)Sr2(Y1xCax)Cu2Oz (x=0∼0.6) is synthesized and characterized. All samples are nearly single-phase, and its crystal structure is...
2012 / T. Tashiro, T. Maeda, R. Abe, S. Takechi, T. Takahashi, et al. -
Synthesis of Au–Ag alloy nanoparticles supported on silica gel via galvanic replacement reaction
Abstract Synthesis of supported Au–Ag bimetallic has attracted much attention since we found for the first time that Au and Ag had synergistic effect on CO oxidation and preferential CO oxidation in rich hydrogen. In this work, the formation of...
2013 / Xiaoyan Liu, Aiqin Wang, Lin Li, Tao Zhang, Chung-Yuan Mou, et al. -
Development of Seasonal Heat Storage based on Stable Supercooling of a Sodium Acetate Water Mixture
Abstract A number of heat storage modules for seasonal heat storages based on stable supercooling of a sodium acetate water mixture have been tested by means of experiments in a heat storage test facility. The modules had different volumes and...
2012 / Simon Furbo, Jianhua Fan, Elsa Andersen, Ziqian Chen, Bengt Perers -
Performance characterization of PCM impregnated gypsum board for building applications
Abstract Previous research studies conducted on building components containing a phase-change material (PCM) have shown a great potential for direct and indirect energy and cost savings in the building envelopes. In particular, PCM impregnated...
2012 / Nitin Shukla, Ali Fallahi, Jan Kosny -
Evaluation of Pre-treatment on the First Stage of an Anaerobic Digester for Enhancing Bio-hydrogen Production and its Associated Energy Balance
Abstract One of the biggest challenges to overcome in WWTPs in developing countries is the reduction of energy consumption, and optimization of the different processes and services at the facility. This challenge could be reached by implementing a...
2012 / K. Peña Muñoz, H. Steinmetz -
Bone Remodelling in BioShape
Abstract Many biological phenomena are inherently multiscale, i.e. they are characterised by interactions involving different scales at the same time. This is the case of bone remodelling, where macroscopic behaviour (at organ and tissue scale) and...
2010 / F. Buti, D. Cacciagrano, F. Corradini, E. Merelli, L. Tesei, et al. -
Development of High Efficiency Back Passivated Silicon Solar Cells with Screen Printed Contacts
Abstract This paper presents a detailed analysis of point-contacted aluminium rear side for silicon solar cells. An industrial feasible process for these solar cells based on screen-printed aluminium layer and thermal oxide/silicon nitride...
2012 / L. Bounaas, N. Auriac, B. Grange, J. Jourdan, S. Mialon, et al. -
Analysis of Cloud Droplets Growth and Phase Transition Radiation Process
Abstract To have the clouds of steam condensate, there must have nuclei of condensation, which can be attachment with steam and gathered themselves together. The atmosphere contains a large number of small particles, they play a condensate core role ...
2012 / Biao Zhang, MingYan Zhu, ChunYu Wang, Xin Guan -
Studying the Effect of Sintering Temperature on the Electrical Properties for the System ZnxNi1-x-yCuyFe2O4
Abstract By The Conventional Solid State reaction is used to prepared the (ZnFe2O4, NiFe2O4,CuFe2O4) From the Oxide of (Cu, Zn, Ni & ferrous oxalate) while had emphasized the Crystallize Synthesis accurately and Sort by these Synthesis by using...
2012 / M.A. Batal, N.H. Alwash, k.T. Alrasol, R.E. Ataya -
Appraisal of Vernacular Building Materials and Alternative Technoligies for Roofing and Terracing Options of Embodied Energy in Buildings
Abstract Nearly two million residential building are built annually in India apart from the offices, commercial and industrial buildings with demand and supply which is increasing year by year. It is essential to conserve the conventional energy by...
2012 / Srikonda Ramesh -
Photon Management Structures Originated by Interference Lithography
Abstract Since micro- and nanostructures for photon management are of increasing importance in novel high efficiency solar cell concepts, structuring techniques with up-scaling potential play a key role for the realization of these concepts. ...
2011 / Benedikt Bläsi, Hubert Hauser, Oliver Höhn, Volker Kübler, Marius Peters, et al. -
Effect of Drag on the Performance for an Efficient Wind Turbine Blade Design
Abstract The utilization of wind energy for power generation purposes is becoming increasingly attractive and gaining a great share in the electrical power production market worldwide. In the present study, a mathematical model is developed to study ...
2012 / Ali H. Almukhtar -
All-Oxide Crystalline Microelectromechanical systems
Abstract We report the fabrication and modeling of a microelectromechanical system (MEMS) entirely made of crystalline oxides. A suspended SrTiO3 (001) microcantilever is employed as flexible substrate for the deposition of epitaxial...
2009 / M. Biasotti, L. Pellegrino, E. Bellingeri, C. Bernini, A.S. Siri, et al. -
The impact of information technology in biological sciences
Abstract The advent of computer and information technology thereafter has been making such conspicuously remarkable changes in every aspect of life that its importance cannot be over accentuated. Biological sciences are not an exception in the...
2011 / Alireza Iranbakhsh, Seyyed Hassan Seyyedrezaei -
Aging of MEMS – Correlation of Mechanical and Structural Properties
Abstract Related to the dramatically smaller volume of microelectromecanical systems (MEMS), new methods in testing and qualification are needed. In single crystal silicon (SCSi) based devices, stress and loading in operation introduces defects...
2009 / A. Neels, G. Bourban, H. Shea, A. Schifferle, E. Mazza, et al. -
Theoretical and experimental studies of metallic grids absorption: Application to the design of a bolometer
Abstract We present a theoretical model of metallic absorbers for electromagnetic waves. This model allows the design of any kind of structured absorber metallic films and dielectrics. The absorption theory of metallic structures was studied with...
2009 / S.Ben Mbarek, T. Baron, S. Euphrasie, B. Cretin, P. Vairac, et al. -
CNTs/TiO2 composites and its electrochemical properties after UV light irradiation
Abstract Due to the unique structure and special physical and chemical properties, carbon nanotubes (CNTs) have potential applications in supercapacitors. Recently, CNTs and their composites as a kind of supercapacitor electrode material have been...
2013 / Bin Zhang, Rui Shi, Yupeng Zhang, Chunxu Pan -
Roller Bearing Fault Diagnosis Based on Nonlinear Redundant Lifting Wavelet Packet Analysis2010 / Lixin Gao, Zijing Yang, Ligang Cai, Huaqing Wang, Peng Chen
-
Biomaterials Approach to Expand and Direct Differentiation of Stem Cells2007 / Chou Chai, Kam W Leong