Materials engineering topic list of research papers
-
User-experience Based Product Development for Mass Personalization: A Case Study
Abstract Nowadays, with the rapid development of information technologies (e.g. web 2.0, cloud computing and virtual reality) and manufacturing technologies (e.g. additive manufacturing), users become more actively involved in the product...
2017 / Pai Zheng, Shiqiang Yu, Yuanbin Wang, Ray Y. Zhong, Xun Xu -
Incorporating catechol into electroactive polypyrrole nanowires on titanium to promote hydroxyapatite formation
Abstract To improve the osteointegration property of biomedical titanium, nano-architectured electroactive coating was synthesized through the electrochemical polymerization of dopamine and pyrrole. The highly binding affinity of Ca2+ to the...
2017 / Zhengao Wang, Jinquan Zeng, Guoxin Tan, Jingwen Liao, Lei Zhou, et al. -
Image Signal Separation by Adaptive Blind Fuzzy Estimator
Abstract Image signals may be mixed in receiver of a visual information communication system and human eyes cannot recognize those overlapped images. An adaptive blind fuzzy estimator is proposed to separate mixed image source signals in this paper. ...
2017 / Yu Du, Xinwei Niu, Kang Yen -
Application of Discrete Wavelet Decomposition in Monitoring of Hole-making Inconel 718
Abstract The paper describes an application of discrete wavelet decomposition of monitored signals from Profibus data originating from spindle and from the feed drive of machine tool. Discrete wavelet decomposition is a most efficient method to...
2017 / Martin Eckstein, Marek Vrabeľ, Ildikó Maňková -
An Integrated Approach to Development And Simulation Manufacturing Processes of Optical Products2016 / Eugeny I. Yablochnikov, Sergey D. Vasilkov, Yuriy S. Andreev, Alexander V. Pirogov, Sergey D. Tretyakov
-
Creation of Favourable Water – Physical Properties of Drill Cuttings with the use of Coagulants
Abstract The negative physical properties of drilling cuttings are caused generally by the presence of large amounts of exchangeable sodium. Its sources are boring solutions with the use of caustic and soda ash and also the saline rocks extracted in ...
2017 / L.N. Skipin, V.S. Petuhova, E.A. Romanenko -
MWCNT-PDMS Nanocomposite Based Flexible Multifunctional Sensor for Health Monitoring
Abstract In this paper, a multi-walled carbon nanotubes (MWCNT) – polydimethylsiloxane (PDMS) nanocomposite is fabricated as a multifunctional sensor to realize a wearable heath monitoring sensor system. The sensor is flexible and can measure both...
2017 / R. Ramalingame, N. Udhayakumar, R. Torres, I.T. Neckel, C. Müller, et al. -
Performance of Ballast Layer Reinforced with Geosynthetics in Terms of Heavy Axle Load Operation
Abstract Nowadays requirements for strength and stability of railway subgrade are increased. It is due to raising of train speed and axle load. Some sections of subgrade that were previously considered stable do not satisfy safety requirements. In...
2017 / Andrei Petriaev, Anastasia Konon, Vyacheslav Solovyov -
The Influence of Alternative Regeneration on the Performance of Gas Turbine Cogeneration Plants
Abstract Cogeneration plants must always ensure correlation of heat production with customer requirements. In a gas turbine cogeneration plant, the methods currently used are exhaust in the atmosphere of a fraction of the flow gas for thermal power...
2017 / Daniel Dragomir-Stanciu -
Impacts of lung and tumor volumes on lung dosimetry for nonsmall cell lung cancer2017 / Weijie Lei, Jing Jia, Ruifen Cao, Jing Song, Liqin Hu
-
Hydrozirconium reaction in heterogeneous compositions
Abstract The research results presented in this article show the behavior of a hydrozirconium reaction for hydrogen generation at temperatures below 100°C in heterogeneous compositions containing zirconium and chemical activators (e.g., hydrated...
2017 / V.K. Milinchuk, E.R. Klinshpont, V.I. Belozerov, A.V. Zagorodnyaya -
Strong magnetic field effect on the nucleation of a highly undercooled Co-Sn melt2017 / Jun Wang, Yixuan He, Jinshan Li, Hongchao Kou, Eric Beaugnon
-
Advanced constitutive modeling and application to industrial forming processes2016 / Frédéric Barlat, Dong-Jin Kim
-
Re-Opening and Shut-in Behaviors under a Large Ratio of Principal Stresses in a Hydraulic Fracturing Test
Abstract In-situ stress measurements were carried out under a 290m overburden in the Kamaishi mine in Iwate Prefecture of Japan. The geology of the measurement site consists of granite. The Hydraulic Fracturing (HF) technique and the Compact...
2017 / Tatsuya Yokoyama, Kiyotoshi Sakaguchi, Takatoshi Ito -
A Fast Algorithm to Simulate Droplet Motions in Oil/Water Two Phase Flow
Abstract To improve the research methods in petroleum industry, we develop a fast algorithm to simulate droplet motions in oil and water two phase flow, using phase field model to describe the phase distribution in the flow process. An efficient...
2017 / Tao Zhang, Shuyu Sun, Bo Yu -
The Influence of Bayesian Networks Structure on Rock Burst Hazard Prediction with Incomplete Data
Abstract Rock burst is often induced by the superposition of static and dynamic loads that produces failure with a sudden and violent release of elastic energy accumulated in rock and coal masses during underground activities. Casualties,...
2017 / Ning Li, R. Jimenez, Xianda Feng -
Optimization Design Method of Decoupling Capacitor in PCB Hardware of Electric Vehicle Controller
Abstract This paper proposes an optimization design method of decoupling capacitor based on geometric average of resonance points. Impedance characteristics of each 5V port have been analyzed (100kHz-1GHz). In order to meet the needs of the target...
2017 / Guangzhao Li, Li Zhai, Huiyuan Feng, Hongtao Gu -
Full - Scale Study of Stress-strain State of Ballastless Upper Structure Construction of Rail Way in Terms of Train Dynamic Load
Abstract This article is about the ballastless upper structure track operation in Russia. The Rheda 2000 construction was laid at the experimental section of railway track. The problem of cracking was founded while using this construction. In order...
2017 / A.F. Kolos, T.M. Petrova, A.O. Makhonina -
The research and application of anchor foundation2016 / Yongping Li, Shiming Yan
-
Evaluation of Anisogrid Composite Lattice Structures Weight Effectiveness using the Load-carrying Factor
Abstract The method of evaluation of the weight effectiveness of lattice composite structures using the criteria «load-carrying factor» and «load-carrying factor coefficient» was developed. The results of comparative evaluation of the weight...
2017 / Andrey V. Boldyrev, Dmitriy M. Kozlov, Maksim V. Pavelchuk