Materials engineering topic list of research papers
-
Shear Bond Strength of Composite Veneers and Acrylic Veneer Bonded to Ni–Cr Alloy: A Laboratory Study2011 / Manish Katyayan, Preeti Katyayan, K. Ravishankar
-
Biosynthesis and Characterization of Nanocellulose-Gelatin Films2013 / Siriporn Taokaew, Sutasinee Seetabhawang, Pongpun Siripong, Muenduen Phisalaphong
-
Separating CO2 from Flue Gases Using a Molten Carbonate Fuel Cell
Abstract A Molten Carbonate Fuel Cell (MCFC) is shown to reduce CO2 emissions from a Coal Fired Power Plant (CFPP). The MCFC is placed in the flue gas stream of the coal fired boiler. The main advantages of this solution are: higher total electric...
2012 / Jarosław Milewski, Janusz Lewandowski -
Diode Lasers used in Plastic Welding and Selective Laser Soldering – Applications and Products
Abstract Aside from conventional welding methods, laser welding of plastics has established itself as a proven bonding method. The component-conserving and clean process offers numerous advantages and enables welding of sensitive assemblies in...
2013 / S. Reinl -
A Design of Spherical Refractive Solar Collector with Low Concentration
Abstract In this paper, an even low-magnification by light solar concentrator with the use of the spherical mirror's refraction is designed. The calculation of the concentration ratio and the volume of the concentrator are given, and the...
2011 / WANG Jianping, WANG Zilan, ZHU Chenghui, XU Xiaobing -
Investigation of Hydrodynamic Pressure in High-speed Precision Grinding
Abstract The conventional method of delivering grinding fluid that floods delivery with high supply fluid pressure and nozzle fluid rare to achieve high performance grinding. However, the hydrodynamic fluid pressure can be generated ahead of the...
2011 / C.H. Li, Webber Mao, Y.L. Hou, Y.C. Ding -
Image Super-Resolution Reconstruction via EROMP Sparse Representation
Abstract In order to improve the resolution of single-image, a new super-resolution reconstruction method is proposed using sparse representation via enhanced regularized-orthogonal-matching-pursuit. The core task of the SR problem is to solve the...
2011 / Jinzheng Lu, Qiheng Zhang, Zhiyong Xu, Zhenming Peng -
Research on the Methods of Compliance and Verification Technology Based on FAR 33.28
Abstract The methods of compliance presented here will enable improved verification technology to aero engines electrical and electronic control system. The approach is based on FAR 33.28, and the scope of this paper is to research the history of...
2011 / Liu Xiaofeng -
Unknown Malicious Code Detection Based on Bayesian
Abstract Analyzed Bayesian classifier with string, n-gram and API as features, we found that it is very difficult to improve Bayesian classifier detection accuracy because selected features are not completely independent. In order to solve this...
2011 / Yingxu Lai, Zhenghui Liu -
A new correction method for flat panel detector in Cone-Beam CT
Abstract To further enhance the correction reliability of flat panel detector (FPD) in Cone-Beam CT (CBCT), a monitoring and correction method for dark field fluctuations is proposed. To monitor dark field fluctuations, the method of local shielding ...
2011 / Hua Zhang, Kuidong Huang, Yikai Shi -
Role of Safety and Product Integrity
Abstract The challenge faced by safety professionals continues to grow in complexity driven by factors such as larger more sophisticated systems, environmental issues, legal ramifications, moral concerns, and an ever-increasing desire to inch closer ...
2012 / Shabbir Merchant -
Compositional effect on TCP phase formation in Ru-containing Ni-based single crystal superalloys2014 / Qianying Shi, Jiajie Huo, Lamei Cao, Jie Li, Xianfei Ding, et al.
-
Structure Analysis for Tunnel Longitudinal Deformation Based on Segment Dislocation Mode
Abstract According to tunnel structure around joints, tunnel longitudinal deformation is analyzed and a three-dimensional finite element model is built based on segment dislocation mode. Tunnel structure stress analysis is conducted from two aspects ...
2012 / Zhiliang Wang, Linfang Shen, Jianbin Xie, Ji Yao -
CIS and CIGS thin films prepared by magnetron sputtering
Abstract Copper indium selenium (CIS) and copper indium gallium selenium (CIGS) thin films were prepared by co-sputtering. The crystal structure, surface morphology and composition ratio were investigated by X-ray diffraction (XRD), scanning...
2012 / Miaomiao Li, Fanggao Chang, Chao Li, Cunjun Xia, Tianxing Wang, et al. -
Identification and analysis of shear waves recorded by three-component OBSs in northeastern South China Sea
Abstract Structure models associated with P- and S-wave velocities contain considerable amount of information on lithology and geophysical properties, which can be used to better understand the complexity of the deep crustal structure. However,...
2008 / Minghui Zhao, Xuelin Qiu, Shaohong Xia, Ping Wang, Kanyuan Xia, et al. -
Genetic variations of glycinin subunit genes among cultivated and wild type soybean species
Abstract Glycinin is a predominant storage protein in most soybean accessions. It is a hexamer constituted by five major subunits, which can be classified into two groups. Group I contains G1, G2 and G3, and Group II contains G4 and G5. The genes...
2007 / Chunmei Wang, Xiaolei Wu, Faxing Jia, Jinsong Zhang, Shouyi Chen -
An Enhanced, Highly Linear, Fully-Differential PLL- Based Sensor Interface
Abstract Time-/frequency-to-digital conversion is gaining popularity since it benefits from the improved timing resolution in new technologies whereas voltage processing suffers from the reduced supply voltage. Due to their low-frequent nature,...
2012 / Hans Danneels, Kristof Coddens, Georges Gielen -
Effect of Zr element addition on the mechanical behavior of Ti48.5-xNi49.5Nb2 alloy
Abstract In this paper, quaternary Ti48.5-xNi49.5Nb2Zrx (x=0∼5at%) shape memory alloys were prepared by non-consumable vacuum arc melting. The microstructure and phase compositions of the shape memory alloys were investigated by scanning electron...
2012 / Wei Liu, Qing Xu, Fushun Liu -
Production of Fe-Si-Al-Ni-Ti soft magnetic alloy powder by inert-gas atomization
Abstract Fe-3%Si-0.5%Al-2%Ni-2%Ti soft magnetic alloy powders were prepared by inert-gas atomization. The composition, phase structure, size distribution, surface morphology and cross-sectional microstructure of the powder were characterized by...
2012 / Xin Liu, Huanwen Xie, Lei Wang, Jiewen Luo, Yixiang Cai -
Research on the Multi-Scroll Chaos Generation Based on Jerk Mode
Abstract This paper presents the theory of the Multi-scroll chaotic attractor based on the Jerk model, designs the hardware circuit, and respectively gives the circuit simulation of the EWB and the numerical simulation of the MATLAB. By comparison,...
2012 / Liu Chunxia, Yi Jie, Xi Xiangchun, An Limin, Qian Yan, et al.