Materials engineering topic list of research papers
-
Development of a ‘millimanipulation’ device to study the removal of soft solid fouling layers from solid substrates and its application to cooked lard deposits
Abstract A mm-scale scraping device was developed to study the removal behaviour of soft solid fouling layers (thickness 0.5–10mm) from solid substrates. A blade is dragged through the circular or rectangular samples at controlled speed and the...
2014 / Akin Ali, Dominic de’Ath, Douglas Gibson, Jennifer Parkin, Zayeed Alam, et al. -
A Novel Method for Incorporation of Micron-Sized SiC Particles into Molten Pure Aluminum Utilizing a Co Coating2014 / M. Mohammadpour, R. Azari Khosroshahi, R. Taherzadeh Mousavian, D. Brabazon
-
Experimental Studies of a Rectangular Cup Formation of Al 7075 Alloy in Superplastic Forming Process
Abstract Superplastic behaviour of certain metals and alloys having very fine grains, very large tensile elongations are obtained within certain temperature ranges at low strain rates. In this work, Al-alloy superplastic sheet material was...
2014 / G. Kumaresan, K. Kalaichelvan -
Investigations on Hard Turning Using Coated Carbide Insert: Grey based Taguchi and Regression Methodology
Abstract The present deals with some investigations on surface roughness during hard machining of EN 24 steel with the help of coated carbide insert. The experiment has been done under dry conditions. The optimization of process parameters have been ...
2014 / Dipti Kanta Das, Ashok Kumar Sahoo, Ratnakar Das, B.C. Routara -
Frictional Tooth Contact Analysis along Line of Action of a Spur Gear Using Finite Element Method
Abstract In the present paper an attempt has been made to study the effect of static coefficient of friction along the line of action of a spur gear. The basic task was to analyze and determine the shape function which defines the change of contact...
2014 / Santosh Patil, Saravanan Karuppanan, Ivana Atanasovska, Azmi A. Wahab -
Energy harvesting from low frequency applications using piezoelectric materials2014 / Huidong Li, Chuan Tian, Z. Daniel Deng
-
Growth of graphene underlayers by chemical vapor deposition2013 / Mopeli Fabiane, Saleh Khamlich, Abdulhakeem Bello, Julien Dangbegnon, Damilola Momodu, et al.
-
Chronic restraint stress decreases the repair potential from mesenchymal stem cells on liver injury by inhibiting TGF-β1 generation2014 / X Yang, Z-P Han, S-S Zhang, P-X Zhu, C Hao, et al.
-
Phase equilibrium in Mg-Cu-Y2013 / Mohammad Mezbahul-Islam, Mamoun Medraj
-
Numerical Simulation of Temperature Distribution and Material Flow During Friction Stir Welding of Dissimilar Aluminum Alloys
Abstract Joining dissimilar materials is required in many engineering applications and conventional fusion welding of dissimilar materials often results in defective welds. Friction Stir Welding (FSW) has paved way for joining dissimilar alloys and...
2014 / R. Padmanaban, V. Ratna Kishore, V. Balusamy -
Irradiation Effect on the Interface of the Composites Used as the Insulation Materials in the Nuclear Fusion Reactor
Abstract In ITER (International Thermonuclear Experimental Reactor), the insulation materials containing polymeric matrix are the most radiation-sensitive among the materials constituting the superconducting magnet in the nuclear fusion reactor....
2014 / M. Hayashi, Y. Nakata, F. Mishima, Y. Akiyama, S. Nishijima -
Axial Crushes Simulation of Thin-walled Square Aluminum Alloy 6061-T5 Foam-filled Section
Abstract This paper deal with numerical study of the dynamic impact of axial crushing on thin-walled extrusion aluminum alloy 6061 and polystyrene foam-filled tubes square cross-section. Non-linear dynamic-impact simulation was done using finite...
2014 / Azrol Jailani, A. Othman -
Investigation of Mechanical Properties, Microstructure and Wear Rate of High Leaded Tin Bronze after Multidirectional Forging
Abstract In this work, the change in mechanical properties, microstructure and wear rate of high leaded tin bronze material was studied after multidirectional forging (MDF) process. The total equivalent strain of 0.75 was applied during MDF process...
2014 / Rahul Gupta, Sanjay Srivastava, G.V. Preetham Kumar, Sanjay K. Panthi -
Influence of Tool Wear on Quality Criteria for Refill Friction Stir Spot Welding (RFSSW) Process
Abstract The Refill Friction Stir Spot Welding Process is a solid state joining process manufacturing excellent mechanical properties of the joint. The aim of this study is to analyse the influence of the tool wear on selected quality criteria such...
2014 / Tobias Montag, Jens-Peter Wulfsberg, Henry Hameister, Rodrigo Marschner -
Acousto-Optics as an Efficient Method for Physical Measurements
Abstract In addition to acousto-optic information processing and manufacturing of such devices, the interaction between optical and acoustic waves are an efficient method for physical measurements. The paper analyses the potential of the...
2015 / Sergei V. Kulakov, Olga L. Balysheva, Arcenii Yu. Zhdanov, Victor V. Kludzin, Oleg V. Shakin -
Determination of Gold by Stripping Voltammetry in Platinum Gold Ore Mineral Raw Materials on Grafite Electrode Modified by Bismuth
Abstract The paper considers the possibility of determining the gold (III) by stripping voltammetry on graphite electrode modified by bismuth. It is shown the modification of the graphite electrode by bismuth increases the sensitivity of detection...
2014 / E.N. Dyachenko, N.A. Kolpakova, U.A. Oskina -
OGMS: A Facility to Measure Out-gassing Rate of Materials
Abstract OGMS, the OutGassing Measurement System, is a facility to measure the outgassing rates of materials. The rate is highly important factor in vacuum science dealing with systems working at pressures below 10-6 mbar. In ultra- high vacuum...
2014 / Ranjana Gangradey, Samiran Mukherjee, Paresh Panchal, N. Ravi Prakash -
Seasonal Weather Conditions Effect on Energy Consumption and CO2 Emission for Air Conditioning Systems Coupled with Enthalpy Energy Recovery Heat Exchanger
Abstract Seasonal energy consumption and subsequent CO2 gas emission analysis of an air conditioner coupled with paper based enthalpy energy recovery ventilator has been performed. Results were then compared with a conventional air conditioning...
2014 / Mohammad Shakir Nasif, Rafat Al-Waked -
Corrosion mechanism of micro-arc oxidation treated biocompatible AZ31 magnesium alloy in simulated body fluid
Abstract The rapid degradation of magnesium (Mg) based alloys has prevented their further use in orthopedic trauma fixation and vascular intervention, and therefore it is essential to investigate the corrosion mechanism for improving the corrosion...
2014 / Ying Li, Fang Lu, Honglong Li, Wenjun Zhu, Haobo Pan, et al. -
Improved Strength and Toughness of Carbon Woven Fabric Composites with Functionalized MWCNTs2014 / Eslam Soliman, Usama Kandil, Mahmoud Taha