Materials engineering topic list of research papers
-
Inclusion flotation-driven channel segregation in solidifying steels2014 / Dianzhong Li, Xing-Qiu Chen, Paixian Fu, Xiaoping Ma, Hongwei Liu, et al.
-
Geometrical Size Effect in High Cycle Fatigue Strength of Heavy-walled Ductile Cast Iron GJS400: Weakest Link vs Defect-based Approach
Abstract Fatigue strength is known to decrease with increasing dimension of the component. This is due to a technological size effect, related to the production process, and to a geometrical size effect, due to a higher probability of finding a...
2014 / M. Cova, M. Nanni, R. Tovo -
Pure Single-Crystalline Na 1.1 V 3 O 7.9 Nanobelts as Superior Cathode Materials for Rechargeable Sodium-Ion Batteries2015 / Shuang Yuan, Yong-Bing Liu, Dan Xu, De-Long Ma, Sai Wang, et al.
-
Evaluation of Tool Life and Cutting Forces in Cryogenic Machining of Hardened Steel
Abstract Machining of En24 steel hardened to 45 HRC was carried out on a lathe to evaluate tool life and cutting forces under the influence of conventional flood coolant and cryogenic coolant. Tests were carried out at cutting speed of 125, 160 and...
2014 / Sunil Magadum, S. Arun Kumar, V.G. Yoganath, C.K. Srinivasa, T. GuruMurthy -
Analysis of Frequency Thermal Characteristics of Pipe-embedded Concrete Radiant Floors Based on FDFD method
Abstract Pipe-embedded concrete radiant floor is widely used for air-conditioning by mainly radiant heat transfer duo to its high energy efficiency and the potential for using low-grade energy source. In this study, two-dimensional frequency-domain...
2015 / Anbang Li, Xinhua Xu, Jiajia Gao -
A CCS Mineralization Process: Investigation of the Production of Magnesium Carbonates from Magnesium Chloride Solution
Abstract Carbon Capture and Storage (CCS) is considered as a promising technology to remediate the severe carbon dioxide release in the atmosphere. Mineralization in the storage process has several advantages, and its products can be used as low...
2014 / Rui Hao, Abir Al-Tabbaa -
Effects of different Sn contents on formation of Ti2SnC by self-propagating high-temperature synthesis method in Ti-Sn-C and Ti-Sn-C-TiC systems2014 / Hong-Yan Sun, Xin Kong, Wei Sen, Zhong-Zhou Yi, Bao-Sen Wang, et al.
-
Extrusion Behavior and Thermoelectric Properties of Bi2Te2.85Se0.15 Thermoelectric Materials
Abstract Highly dense n-type Bi2Te2.85Se0.15 bulk thermoelectric materials were fabricated by mechanical alloying (MA) and hot-extrusion techniques. The extrusion behavior, microstructure, texture, thermoelectric and mechanical properties have been...
2014 / Zhi-Lei Wang, Kenji Matsuoka, Takehiro Araki, Takahiro Akao, Tetsuhiko Onda, et al. -
Frequency up-converting Vibration Energy Harvester with Multiple Impacting Beams for Enhanced Wideband Operation at Low Frequencies
Abstract This work presents an approach for increasing operational bandwidth of a vibration energy harvester in low-frequency environments by effectively exploiting contact-based frequency up-conversion. It was implemented by a couple of...
2014 / Rolanas Dauksevicius, Danick Briand, Robert Lockhart, Andres Vásquez Quintero, Nico de Rooij, et al. -
Photovoltaics in Net Zero Energy Buildings and Clusters: Enabling the Smart City Operation
Abstract From 2012 to comply with the ED 2010/31/EU and its recasts, all new buildings will perform as Nearly Zero Energy Buildings (NearlyZEBs). Buildings are going to be transformed through a careful design into energy generation systems, and the...
2015 / A. Scognamiglio, G. Adinolfi, G. Graditi, E. Saretta -
Assessing CO2 Adsorption Capacities onto Shales Through Gravimetric Experiments: A First Step in the Feasibility Study of Coupling “Fracking” with Carbon Storage
Abstract Oil and gas production from shale formations stimulated by hydraulic fracturing (or “fracking”) is an abundant source of domestically available energy for the United States of America. Today, shale formations are mostly fracked using fresh...
2014 / Stéphane Lafortune, Francis Adelise, David Ricardo Rhenals Garrido, Zbigniew Pokryszka -
Microcellulose particles for surface modification to enhance moisture management properties of polyester, and polyester/cotton blend fabrics
Abstract In this work we studied the effect of surface treated fabric by applying Microcrystalline Cellulose (MCC) Particles using two different procedures. The first method was to dissolve MCC particles and form a MCC solution which further was...
2015 / Magdi El Messiry, Affaf El Ouffy, Marwa Issa -
Synchronization and optimization of semiconductor ring lasers with self-feedback2015 / Ping-Ping Xue, Jian-Zhong Zhang, Ling-Zhen Yang
-
Crystalline Quality of CdSe Single Crystalline Commercial Wafer
Abstract Cadmium selenide is a II-VI semiconductor compound with 1.67eV energy gap (≈ 300K) and high stopping power for nuclear radiation. Its crystalline structure is hexagonal (wurtzite) and it is used in solar cells, transistors, light emitting...
2015 / J. Núñez García, R. D́Elía, E. Heredia, A. Geraci, A. Tolley, et al. -
Pretreatment of Woven Jute FRP Composite and Its Use in Strengthening of Reinforced Concrete Beams in Flexure2013 / Tara Sen, H. N. Jagannatha Reddy
-
Active and Semi Active Vibration Isolation Systems Based on Magnetorheological Materials
Abstract The paper presents active vibration isolation systems based on “smart” materials. Very promising “smart” materials are MR elastomers. Devices based on them have the ability to work in all vibration isolation modes (passive, semi-active and...
2015 / Alexey M. Bazinenkov, Valery P. Mikhailov -
Therapeutic efficacy of doxorubicin delivery by a CO2 generating liposomal platform in breast carcinoma
Abstract Drug delivery using thermosensitive liposomes (TSL) has significant potential for tumor drug targeting and can be combined with local hyperthermia to trigger drug release. Although TSL-mediated drug delivery can be effective by itself, we...
2015 / Hee Dong Han, Ye Won Jeon, Ho Jin Kwon, Hat Nim Jeon, Yeongseon Byeon, et al. -
Cyber-Physical Production Systems Combined with Logistic Models – A Learning Factory Concept for an Improved Production Planning and Control
Abstract Nowadays, production enterprises are faced with an array of challenges including increasing pressure regarding costs, demands for individualized products as well as the growing significance of logistic performance and costs, to name just a...
2015 / Kai-Frederic Seitz, Peter Nyhuis -
Chemo/bio-sensor networks2006 / Robert Byrne, Dermot Diamond
-
Effects of surface energies of biomimetic materials for stone conservation on reinforcement properties2013 / Qiang Liu, Qingju Liu, Jin Zhang, Zhongqi Zhu, Bingjian Zhang