Materials engineering topic list of research papers
-
Simulation Study on the Effect of Crack Width on ECT Signal
Abstract Eddy current testing (ECT) is a widely used non-destructive inspection technique on pipeline. To develop a precise inspection method, the variations of the amplitude and phase of ECT signal should be investigated taking into account crack...
2011 / Song Kai, Wan Benli, Zhang Lipan, Li Junjiang -
Diameter Fitting by Least Square Algorithm Based on the Data Acquired with a 2-D Laser Scanner
Abstract For improving the working efficiency of the forestry harvester, a laser scanner was used to collect the 2-d scan data of the target living-trees. First of all, the noise of the scanning data are filtered with a extraction algorithm....
2011 / Wang Dian, Liu Jinhao, Wang Jianli -
Laser Optical Characterization of Smooth Surfaces with Respect to Roughness and Defects in the Micrometer Range
Abstract Processes for the production of optically smooth surfaces are very costly. This is due to a long machining time (ultra-precision machining) or due to a large amount of material that is processed in a short time (rolling). In-process and...
2011 / D. Kruse, S. Patzelt, C. Dollinger, A. Tausendfreund, G. Goch -
Making of Intelligent Data Processing System of the Experiment in the Coefficient Determination of the thermal Conductivity
Abstract For solving the questions the intelligent processing system of data in the coefficient determination of the thermal conductivity based on MTB (Multimedia ToolBook) had been developed. The questions included the accuracy of the report...
2011 / Jiang Xing-fang, Li Feng, Li Xiang, Ouyang Jifang -
Detection of Voltage Flicker Caused by Intergrated Wind Power Based on Adaptive Lifting Wavelet Transform
Abstract Due to the randomicity of wind power energy, the voltage flicker of power grid will occur when large-scale wind power connected to the power grid. By constructing its predict-filter and update-filter, a method to detect the flicker based on ...
2011 / XU Xiaobing, LI Wei, WANG Jianping, MU Daoming, QIAN Zituo -
Study on Measuring Microfiber Diameter in Melt-blown WebBased on Image Analysis
Abstract Melt-blown nonwovens are widely used in filter materials, fiber diameters and distributions play an important role in affecting the filtration efficiency of melt-blown material. The traditional method of microfiber diameter testing mainly...
2011 / Chen Zeyun, Wang Rongwu, Zhang Xianmiao, Yin Baopu -
Study on Key Certification Issues of Composite Airframe Structures for Commercial Transport Airplane
Abstract In order to facilitate the type certification of COMAC C919 airplane and type validation of Boeing 787 Dreamliner and Bombardier CSeries airplane, this paper presents a study on key certification issues introduced by extensive use of...
2011 / Zhang Zhuguo, Zhang Yingchun, Ou Xupo -
Characterization and influence of defect size distribution induced by ball-end finishing milling on fatigue life
Abstract This study is dedicated to the characterization of the complex micro-geometry induced by finishing milling –with a ball-end tool commonly used to machine complex shapes- and to an approach that takes account of this aspect of surface...
2011 / A. Souto-Lebel, N. Guillemot, C. Lartigue, R. Billardon -
Characteristics of Dissimilar FSW Welds of Aluminum Alloys 2017A and 7075 on the Basis of Multiple Layer Research2013 / Krzysztof Mroczka, Anna Wójcicka, Adam Pietras
-
In Praise of Hard Questions2005 / T. Siegfried
-
Living with global climate diversity—suggestions on international governance for coping with climate change risk2013 / Peijun Shi, Qian Ye, Guoyi Han, Ning Li, Ming Wang, et al.
-
Cyclic Fracture, FCG and Ratcheting Studies on Type 304LN Stainless Steel Straight Pipes and Elbows
Abstract With an objective of understanding the cyclic fracture, fatigue crack growth and ratcheting behaviour of Type 304LN stainless steel piping components used in primary heat transport system of nuclear power plants, subjected to various...
2013 / G. Raghava, P. Gandhi, K.K. Vaze -
Fiber Loop Ringdown — a Time-Domain Sensing Technique for Multi-Function Fiber Optic Sensor Platforms: Current Status and Design Perspectives2009 / Chuji Wang
-
Morphology, order, light transmittance, and water vapor permeability of aluminum-coated polypropylene zeolite composite films2010 / Devrim Balköse, Kaan Oguz, Lutfi Ozyuzer, Suleyman Tari, Esen Arkis, et al.
-
Oxidation Behavior of Fe–25Cr–20Ni–2.8Si During Isothermal Oxidation at 1,286 K; Life-time Prediction2008 / R. Bauer, M. Baccalaro, L. P. H. Jeurgens, M. Pohl, E. J. Mittemeijer
-
Palm leave and plastic waste wood composite for out-door structures
Abstract The objective of this paper is to produce an environmentally friendly artificial wood for structural application, by recycling mixed plastic waste and date palm leaves waste. Several pretreated wood plastic composites mixtures, using a 1:1...
2013 / Mohammed A. Binhussain, Maher M. El-Tonsy -
Design, Fabrication, and Properties of High Damping Metal Matrix Composites—A Review2009 / Hui Lu, Xianping Wang, Tao Zhang, Zhijun Cheng, Qianfeng Fang
-
Progress of Application Researches of Porous Fiber Metals2011 / Zhengping Xi, Jilei Zhu, Huiping Tang, Qingbo Ao, Hao Zhi, et al.
-
Catalytic nucleation of a meta-stable δ phase in phase-seeded undercooled Fe75Ni25 melts
Abstract Undercooled Fe75Ni25 melts were phase-seeded by a high purity iron. It was found that above a critical undercooling, ΔT c =135K, a metastable δ phase (b.c.c) solidifies from ...
2012 / Y.Z. Chen, X.H. Shi, F. Liu, G.C. Yang, Y.H. Zhou -
Design of fiber reinforced laminates for maximum fatigue life
Abstract Composite materials are used in many structural applications due to their superior properties, e.g., strength-to-weight ratio. Composite structures also offer great flexibility and stiffness in design, allowing change of the material system ...
2010 / Ahmet H. Ertas, Fazil O. Sonmez