Materials engineering topic list of research papers
-
Study of Dynamic Buckling of FG Plate Due to Heat Flux Pulse2015 / L. Czechowski
-
Permittivity of LTCC substrates porousified with a wet chemical etching process
Abstract In this work, the permittivity of porous LTCC (low temperature co-fired ceramics) DP 951 is measured and evaluated. The dielectric constant is locally lowered to improve the performance of e.g. radar sensors operated in the GHz range....
2010 / Achim Bittner, Ulrich Schmid -
High Speed Piezoelectric Microscanners with Large Deflection using Mechanical Leverage Amplification
Abstract In this paper design and fabrication of high speed piezoelectric microscanners are presented. These single axis microscanners with 1 mm2 mirror area feature thin-film PZT (lead-zirconate-titanate) actuators with high piezoelectric...
2012 / S. Gu-Stoppel, D. Kaden, H.J. Quenzer, U. Hofmann, W. Beneckea -
ASR Assessment – Concrete Prism Testing within a Regulatory Framework
Abstract The experience of ASR and ASR testing varies substantially across Europe and outside. Several testing procedures exist but are not always linked to service life records. Also, the European concrete standard on this issue refers to...
2013 / Terje F. Rønning, Jan Lindgård, Sigrun Kjær Bremseth -
The nanostructure's management is the basis for a functional fatty foods’ production
Abstract For the first time the functional types of butter with herbal supplements (HS) are developed. The effect of HS on micro-and nanostructure of developed types of butter was studied. It was established that the introduction of HS reduces the...
2012 / Sergey V. Ivanov, Tamara A. Rashevskaya -
Nanocomposite Membranes of Silica and Polysulfone for Improved Gas Permeation2012 / M.B. Patil, S.A. Al-Muhtaseb, E. Sivaniah
-
Muscle Tissue Actuator Driven with Light-gated Ion Channels Channelrhodopsin
Abstract The authors aim to develop muscle cell actuators driven by a photostimulation. Recently, bioactuators that exhibit self-organization have been attracting a lot of attention, because biological devices are expected to have significant...
2013 / Masahiro Shimizu, Kota miyasaka, Koichiro Miyamoto, Toshifumi Asano, Tatsuo Yoshinobu, et al. -
Growth and Gas Sensing Properties of Self-Assembled Chain-Like ZnO Nanostructures
Abstract This work reports preparation of self-assembled chain-like ZnO nanostructures and investigation of their gas sensing properties. ZnO nanostructures of high density and homogeneity were obtained by electrochemical anodization method. The...
2012 / V. Galstyan, E. Comini, C. Baratto, A. Ponzoni, G. Faglia, et al. -
Selection of Wiring Environment and Failure Rate Comparison Analysis in Aircraft Wiring Risk Assessment
Abstract There has been a greater understanding of the importance of EWIS in aircraft safety in recent years. The expert opinion, a formal pair comparison experiment is applied to acquire wiring failure rate data. The selection of wiring environment ...
2011 / Xiao Nve, Ma Zan, Tian Yi -
Crevice Corrosion Study on Alloy 22 by Electrochemical Noise Technique
Abstract Ni-Cr-Mo alloys show a remarkable corrosion resistance in a wide variety of environments. These alloys are candidate materials for the corrosion resistant engineered barriers of nuclear repositories. Ni-Cr-Mo alloys are susceptible to...
2012 / M.L. Ungaro, R.M. Carranza, M.A. Rodriguez -
An Evaluation Method for the Remaining Strength of a Plate Girder with Local Corrosion under Sleepers
Abstract There is a lot of local corrosion damage on the upper flanges under rail sleepers in the plate girder railway bridges. Since the sleepers are put on the upper flanges directly, the corrosion at the boundary progresses faster and causes a...
2011 / M. Fukuda, K. Fujii, T. Nakayama, S. Matsui -
Low-Cycle Fatigue Tests of a Type of Buckling Restrained Braces
Abstract In order to satisfy fatigue performance requirements of High Performance Seismic Dampers (HPSDs), which are expected to withstand Level 2 earthquakes three times without being replaced, a low-cycle fatigue experiment was carried out to...
2011 / Tsutomu Usami, Chunlin Wang, Jyunki Funayama -
Forming Process Integrated Induction Brazing
Abstract Processing steps additional to forming operations, such as joining, usually require a vast effort for transport and storage. Due to integration of currently external production steps, processes could be synchronized. Brazing represents an...
2012 / J. Avemann, R. Willy, G. Zhao, P. Groche -
H∞ output feedback control for constrained discrete-time piecewise affine systems
Abstract In this study, a novel robust H ∞ output feedback control scheme is presented for discrete-time piecewise affine (PWA) systems in the presence of external disturbance and time-domain constraints. The suggested control...
2011 / Juan Wang, Haiying Du -
Effect of rotation on plane waves in generalized thermo-microstretch elastic solid with a relaxation time2012 / K. Lotfy, Mohamed I. A. Othman
-
Data-intensive Spatial Indexing on the Clouds
Abstract In this paper, we investigate the potential of cloud computing for data-intensive spatial indexing. We assess the benefits in performance and cost. Specifically, we consider a data- and compute-intensive spatial application, namely, the...
2013 / Abdelmounaam Rezgui, Zaki Malik, Jizhe Xia, Kai Liu, Chaowei Yang -
Correcting the Stress-Strain Curve in Hot Compression Process to High Strain Level2009 / Y. P. Li, E. Onodera, H. Matsumoto, A. Chiba
-
Current Progress in R&D of Fluoride Volatility Method
Abstract Fluoride Volatility Method is regarded to be a promising advanced pyrochemical reprocessing technology, which can be used for reprocessing mainly of oxide spent fuels coming from current LWRs or future GEN IV fast reactors. The technology...
2012 / Jan Uhlíř, Martin Mareček, Jan Škarohlíd -
Analysis of Micro Burr Formation in Austenitic Stainless Steel X5CrNi18-10
Abstract This paper presents the results on the analysis of micro-burr formation for slot milling of austenitic stainless steel X5CrNi18-10. Two-fluted submicron grain cemented carbide tools with a diameter of d = 0.5mm were used. Applying cutting...
2012 / D. Biermann, M. Steiner -
Design the Structural Mechanics Network Curriculum
Abstract In this paper, the Structural Mechanics network curriculum is designed to assist the classroom teaching. Based on Structural Mechanics network curriculum, the design thought, the design measure and the attention matters of network...
2012 / Jianying Ren, Congjuan Yang, Yanqiang Li